Laboratory Outsourcing and Scientific Sourcing Center

MULTIPLE TESTS
Medical Device Company needs Biophysical Laboratory for ISO dentistry gel testing to ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength te...

Medical Device Biophysical Laboratories needed to quote on the cost of conducting some tests on some 3D printed medical devices accordance with ISO 10328.Prosthetics - Structu...

USA CAP/CLIA Clinical Laboratory needed for bioanalysis for FDA Clinical Trial of new regulated medical product used to assist doctor in diagnosis and treatment. Transfer, dev...

Medical Device Company needs Biomechanical Laboratory performance testing on 3d printing orthotics including compression, tension, torsion, and cyclic load tests.

USA Bioanalytical Laboratory for partial thromboplastin time PTT testing PTT testing for the development of a human cell culture line. The cell culture supernatant needs to be...

BUDGET APPROVED Europe Pharmaceutical Analytical Laboratory needed to : analyse PSD (particle size distribution) for products as glucose syrup dried.

Large Pharmaceutical Company needs Laboratory for USP physical characterization testing (surface tension, viscosity, density, ionic strength) on an OEB5 liquid formulation and...

Asia Biophysical Laboratory needed for experimental abrasiveness testing of different teeth whitening toothpastes .

Asia Biophysical Laboratory needed for testing for the measurement of tooth surface roughness.

Medical Device Laboratory needed for ASTM testing of orthopedic intramedullary nail to ASTM F1264 Standard Specification and Test Methods for Intramedullary Fixation Devices

Medical Device Laboratory needed for Biomechanical testing for orthopedic implants i.e. interlocking nails, bone plates, bone screws and spine fixation system ASTM F1264
ASTM...

Orthopedic Medical Device Laboratory needed for biophysical /biomechanical testing/ ISO certification of medical prothesis products with ISO 10328 'Prosthetics, Structural tes...

Preclinical Biophysical Laboratory specializing in bone research is needed for the evaluation of osteoinductive properties of a new medical device on in vivo mandibular bone ...

Laboratory needed for Certificate of Friction COF testing of a polymer medical adhesive product. Testing to be performed in a reciprocal movement (back and forth - between two...

Medical Device Manufacturer needs biomechanical laboratory for ISO 10328 Lower limb prosthesis structural testing

Medical device laboratory needed for physical testing of transfusion sets to the physical requirements of ISO 1135-4, Transfusion equipment for medical use -- Part 4: Transfus...

Medical device laboratory needed for several ASTM tests on orthopedic implant components as per ASTM F382 Standard Specification and Test Method for Metallic Bone Plates ASTM ...

Orthopedics medical device laboratory needed for physical certification testing of prosthetic devices to ISO10328 (Prosthetics - Structural) for a lower limb prosthesis

Biomechanical / medical device laboratory needed for development of spinal implantable device manufactured with implantable grade PEEK and Titanium 3. The following testing i...

Laboratory needed for shear or flow testing of powdered yeast extract to detect differences.

LONG-TERM TESTING Pharmaceutical analytical laboratory needed for in vitro release testing & physical characterization (viscosity and rheology) for drugs in solid oral dosage ...

FDA GMP Bioanalytical laboratory needed for AATB human tissue bioanalysis including stability studies, protein degradation, bioburden and tensile strength.

Bioanalytical laboratory needed for structural analysis of therapeutic protein molecule by FTIR (ATR) aqueous samples, like BSA in aqueous, etc.

Bioanalytical laboratory needed for quality control testing of reference materials, including identification and purity assay by HPLC, LCMS, IR, UV-Vis, NMR, Polarimetry

Medical Device Manufacturer needs bioanalytical laboratory needed for USP particle analysis on samples taken from medical device. Please provide quote on samples taken from th...

Bioanalytical laboratory needed for active pharmaceutical ingredient API characterization testing:: hygoscopicity, solubility, pH, dissociation constant, partition coefficient...

Pharmaceutical analytical chemistry laboratory needed for particle size analysis using a Malvern Zetasizer ZS90 with the red laser and a stray-light filter.

Pharmaceutical company needs *Globule size limits and *Limit of free fatty acid tested per USP 39 injectable lipid emulsion standards Per: Method I and Method II as directed u...

Orthopedics Medical Device Laboratory needed for ASTM Biophysical Testing: static compression, compression sheer, subsidence, dynamic compression, fatigue to runout, cantileve...

FDA GLP Bioanalytical Laboratory needed for GLP Small Molecule Study for Molecular Level Study and Extinction coefficient for a small molecule in MeOH and water

Preclinical Laboratory needed for biomechanical testing of Biologic implantables to be used as replacement tissue. Tests needed for mechanical properties such as elasticity, s...

ISO Accredited USA and European Biophysical Laboratory Needed for biomaterials testing of dental implant material: to ISO 14801- Dynamic fatigue test for endosseous dental im...

Biomedical company needs biomaterials laboratory for ISO Testing of resins cements to ISO 5833:2002 specifications, Implants for surgery -- Acrylic resin cements

Biomechnical laboratory needed for sports performance testing of Cardio machine - 800 lb. including weight limit, calories burned, tensile strength of metal or wear and tear ...

Bioanalytical laboratory needed for flow cytometry for characterization of white blood cell separation filter. Need a laboratory that is capable of doing white blood cells cou...

Biomechanical laboratory needed for bone porosity testing measurements of bone samples

Therapeutics company needs laboratory for Syringe plunger force testing to ISO 7886-1 Annex G only
3 syringe models x 5 units/model x 3 reps/unit = 45 tests total

LONG-TERM TESTING Large Medical Device Company needs materials laboratory for RAL-GZ 387/1 compression testing for fabric

Orthopedics company needs medical device product safety laboratory for accelerated ageing testing of Orthopaedic implants in tyvek pouches including extracables and leachable ...

Biomechanical Laboratory needed for Compression fatigue testing on dental implants under saline per ISO 14801, Dentistry -- Implants -- Dynamic fatigue test for endosseous den...

Biomechanical laboratory needed for Radioactivity Testing of dental propylaxis paste: Radio active dentine abrasion value ( RDA value ) for propylaxis paste. to DIN EN ISO 116...

Clinical Sports Performance laboratory needed for clinical biomechanical testing in humans to validate performance of university's sports biomechanics equipment Simi motion a...

Medical technology laboratory needed for ASTM Integrity Testing of balloon portion of enteral feeding devices as per ASTM F2528, Enteral Feeding Devices Retention Balloon Test...

Medical technology laboratory needed for catheter testing on intravenous catheter throughout the indicated therapy to check on thrombosis and flow rate.

Medical Technology / Biomedical laboratory needed for catheter testing: Embolic cube testing

Materials Laboratory needed for biomechanical / biophysical testing for medical device burs:
¬Mechanical force of d¬evices test (compress¬ion, Torsion)
Biomechanical...

Bioanalytical Laboratory needed for Product development work for molecular biology (PCR, library prep, DNA sequencing on Illumina platform). We need help with verification te...

Biochemistry laboratory needed for custom synthesis and quality control testing of Zn2+ complex of anthracenyl terpyridine