Materials Lab needed for ASTM Measurement of Glass Panel Abrasion Testing

Project Description

Materials Laboratory needed to measure data before and after ASTM abrasion test on transparent coated transparent glass panel .

1) Mechanical Taber Abrasion/Contact Angle Test, ASTM D 6578 and C 813.

Report should be in following format :-
a. Initial Contact Angle: 101 degrees water contact angle.
b. Contact Angle After 200 Cycles: 78 degrees.
c. Contact Angle After 400 Cycles: 71 degrees.

We need to stop test at 500 cycles .

2) UV Radiation Test, ASTM G 53 Modified, 100 hours .

Treated glass surface should not show evidence of coating degradation such as yellowing, crazing, haze, loss of adhesion, or loss of abrasion resistance.

3) ASTM C 1549 FOR Solar reflectance index .

4) ASTM D1006 HAZE TEST .

5) ASTM 1894 STATIC COEFFICIENT OF FRICTION

These 5 tests if can be conducted at your lab please let us know price and specs for size of glass needed and ETA.

Regards,
Rohit Rajput
Global Sales Head,
Advanced NanoTech Lab
Mumbai , INDIA.
+91 7666203505
www.antlab.in

Project Information

Number:19-01396

Industry:Construction and Building

This request is closed and is no longer accepting quotes. Register or Log In to receive alerts when similar requests open in the future.

Other construction and building laboratory services.

Other Construction and Building testing, analysis, scientific research and development, inspection, certification, engineering, failure investigation, and product development needs include :

Aggregate Testing

Air Leakage Testing

Air Performance Testing

Asbestos Testing

Bearing Capacity Testing

Blast Surveys Boil Testing

Bolt Tension Testing

California Bearing Ratio Testing

Coating Materials Testing

Coating Thickness Testing

Code Compliance Testing

Concrete Testing

Conformity Assessment Testing

Construction Forensics Testing

Construction Materials Testing

Dimensional Testing

Hydrostatic Water Testing

Direct Shear Testing

Durability Testing

Dye Pentrant Testing

Environmental Monitoring Environmental Site Assessments Failure Analysis Field Inspection Testing

Fireproofing Inspection Testing

Flood Protection Testing

Formaldehyde Testing

Foundation Assessments Fragmentation Testing

Humidity Testing

Hydrostatic Pipe Testing

Indoor Air Quality Testing

Industrial Hygiene Testing

Insulation Testing

Lead Paint Testing

Masonry Testing

Mortar Testing

Non-Destructive NDT Paint Adhesion Testing

Pavement Distress Testing

Pavement Evaluations Penetration Testing

Petrography Testing

Porosity Testing

Potable Water Testing

Prism Testing

Property Condition Assessments Testing

Radon Testing

Reinforced Concrete Testing

Roofing Testing

Sealer Testing

Seismic Surveys Testing

Site Characterizations Testing

Site Selection Inspections and Testing

Soil Compaction Testing

Steel Erection Testing

Steel Fabrication Testing

Strength Testing

Stress Testing

Structural Steel Testing

Structural Testing

Subsurface Testing

Telecom Network Construction Testing

Terrain Analysis Testing

Thermal Stability Testing

Threshold Inspections Ultrasonic Weld Inspection Testing

Visual Weld Inspection Testing

Volatile Organics Testing

Water Performance Testing

Waterproofing Inspection Testing

Weather tightness Testing

Weld Evaluations Testing

Weld ability assessments Testing

Wind Testing

Learn more about construction and building testing and research

Materials Lab needed for ASTM Measurement of Glass Panel Abrasion Testing

Project Description

Project Information

Test Request: 24-02059

Test Request: 24-02058

Test Request: 24-02042