Insulation Laboratory Testing Requests

Contract testing facility needed to test dome houses per the industry standards (ASTM and NFP) in the US.
I found that a total of 8 tests are required:
1. Standard Test Met...

A certified/accredited acoustics laboratory needed to sound-test an approx. 80x45x100 inches rail gangway system per the ISO 10140-2 (Laboratory measurement of sound insulatio...

MULTIPLE TESTING
USA Construction Materials Laboratory needed for testing and analysis of a composite insulation material for identification of its component, property and eq...

MULTIPLE TESTING
Materials Laboratory needed for ASTM Thermal conductivity testing at 25 C and 25 psi as per ASTM C518 (Standard Test Method for Steady-State Thermal Transmi...

MULTIPLE TESTING
Engineering Firm needs Materials Laboratory for water submerged blanket testing. Due to a leak, the blanket was submerged in water for approximately a year....

MULTIPLE TESTING
Contract Laboratory needed for UL physical and electrical properties testing of PVC to be used in 105° insulation cables as per UL 83 standard UL (Standard...

MULTIPLE TESTING
Materials Laboratory needed for ASTM insulation testing for insulation R values as per ASTM C518-21 Standard Test Method for Steady-State Thermal Transmissi...

Independent Third-Party Laboratory needed for UL and ASTM electrical tapes new vendor qualification testing to ASTM D-1000 and UL510 which includes tests like adhesion to st...

MULTIPLE TESTING
SMALL CORPORATIONG needs testing for fire resistance and smoke rating on duct insulation.

EUROPEAN LABORATORY (Switzerland, Germany or France Lab Preferred)
Large Energy Company needs Europe Laboratory for bisphenol-A BPA migratory testing on electrical insulation...

MULTIPLE TESTING
Industrial Laboratory needed for thermal performance and energy efficiency certification testing for aerogel insulation product.

I would appreciate if you...

AUSTRALIA LABORATORY
Australia Contract Laboratory needed for oil content testing and resistance to compression testing in glass wool insulation product.

MULTIPLE TESTING
Electronics Laboratory needed for coil insulation product testing with pulse generator for following parameters: 18kV 1,2/50us according to standard UL/IEC 6...

LONG-TERM TESTING
MULTIPLE PRODUCTS
ISO 17025 Contract Laboratory needed for SASO-SABER certification testing for multiple building and construction products that are export...

INDIA LABORATORY
MULTIPLE TESTING
Independent Laboratory needed for pre-insulated panels product testing to be Underwriter Laboratories (UL) certified. Please guide with pro...

Electrical Compliance Laboratory needed for electrical insulation testing of laminated metal foil. i.e. we want to perform an electrical insulation test on a laminated metal f...

USA LABORATORY (Large Lab Preferred)
USA Contract Laboratory needed for ASHRAE clothing insulation testing as ASHRAE-55 Thermal Environmental Conditions for Human Occupancy

MULTIPLE TESTING
Consumer Products Laboratory needed for testing outdoor camping inflatable sleeping pad to confirm thermo insulation r-value rating. ASTM F3340 test standard...

MULTIPLE TESTING
Contract Laboratory needed for testing a sample of duct insulation according to ASTM C1290 standards.

CANADA LABORATORY ( Alberta Lab Preferred)
Canada Contract Laboratory needed for R-Value testing of a unique idea for an insulated panel. I do not know what the dimensions of...

Contract Laboratory needed for propellant resistance testing of finished wire to MIL-DTL-82381 4.6.4.21 Propellant resistance testing of specimen of finished wire, 24 inches (...

MULTIPLE TESTING
CONSULTING
USA Materials Laboratory needed for consulting and testing of high-quality cellulose fiber insulation, through the recycling of urban waste. incl...

MULTIPLE PRODUCTS
MULTIPLE TESTING
Construction Materials Laboratory needed for the following ASTM and ISO Testing of thermal insulation and protective coating:
ASTM Standa...

Contract Laboratory needed for insulation testing of knit fabric. The insulation should adsorb a maximum weight gain in water when subjected to room
temperature distilled w...

EUROPE LABORATORY
Europe Consumer Products Laboratory needed for Manikin testing for sleeping bag. Testing for CLO value. comfort temperature value must be -11 degrees celciu...

USA LABORATORY (Florida Laboratory Preferred)
BUDGET APPROVED ($150 - $200 USD)
USA Construction Materials Laboratory needed for insulation testing for ETBE/MTBE. Can you p...

MULTIPLE PRODUCTS
MULTIPLE TESTS
Materials Laboratory needed for testing HV insulators and MV cable accessories.Thank you

UK LABORATORY
UKAS Accredited Materials Laboratory needed for ISO Testing of fiber cement Flat sheets using Cement, Silica sand, Cellulose to BS EN ISO 717-1:2020 & BS EN ...

Contract Laboratory needed for asbestos testing in vermiculite insulation

MULTIPLE TESTS
Materials Laboratory needed for ASTM compliance testing of GFRP(Glass Fiber Reinforced Polymer) to show it is compliant with ASTM D7957/D7957M-22.So please ch...

Papermill needs Laboratory for testing of brown thick solution running down electrical cable that might I seem to be the Raychem solution from the cable paper insulation.

FAILURE INVESTIGATION
Contract Laboratory needed for identification of brownish/black tarry liquid substance leaking from electrical armored cabling that we need to identify....

Contract Apparel Laboratory needed for testing to determine the Clo value of Bison Wool that is needled in the form of batting insulation for a jacket.

MULTIPLE TESTS
Manufacturer needs USA Accredited Laboratory for insulation panelstesting to obtain certification, accreditation and all the requirements to sell it in the U...

INdustiral Hygiene Laboratory needed for insulation material exposure testing.

MULTIPLE TESTING
Winter outerwear brand needs USA Contract Laboratory needed for thermal insulation capacity and temperature certification testing for our jackets. Please adv...

MULTIPLE TESTING
Construction Materials Laboratory needed for the following testing for bio-based foam for the construction industry, that could be used in applications like ...

MULTIPLE TESTING
Materials Laboratory needed for ASTM and MIL-STD friability testing with modifications to drying temperature 104C to 113C. to ASTM C 421 Standard Test Method...

Contract Laboratory needed for MIL-STD Compliance testing of naval contact adhesive to show it is compliant with MIL-A-24179A which is a specification for the use of adhesive...

Large Automotive Company needs Electrical Laboratory for ASTM CTI (Comparative Tracking Index) of automotive electrical insulating materials according to ASTM D3638.

ASIA LABORATORY
MULTIPLE TESTS
Asia Laboratory needed to carry sound insulation testing at wall and vibration on RC slab. Testing must be carried out onsite on Asia constru...

MULTIPLE TESTING
MULTIPLE PRODUCTS
USA Materials needed for UL insulation characteristics testing of reinforced polymers in accordance to UL746 A standard. We want to test i...

ASIA LABORATORY
MULTIPLE TESTS
Asia Materials needed for K Value testing and R value testing for insulation

MULTIPLE TESTS
Industrial Laboratory needed to perform EN 6049-003 Part 003: Braided, Tubular, Expandable - Product Standard, Aerospace Series - Electric and EN 6049-006 Ae...

MULTIPLE TESTS
Contract Laboratory needed for the following Cat 5 Cable testing to it's technical specification:
Coupling Resistor at 1 MHz
Coupling Resistor at 10-100 MHz ...

USA LABORATORY
MULTIPLE TESTS
Contract Laboratory needed with the equipment to conduct ASTM ozone tests on insulation rubber, including neoprene. Specimens: Extruded rubber...

Electrical Laboratory needed for IEC Testing of electrical steel stamping IEC 60243-1 the DC break down voltage of the insulation shall be measured , there fore few lamination...

MIDDLE EAST LABORATORY
MULTIPLE TESTS
MULTIPLE PRODUCTS
Middle East Laboratory needed for Mineralogy testing (XRD)and thermal insulation properties for our rocks raw mat...