Laboratory Outsourcing and Scientific Sourcing Center

MULTIPLE TESTING
BUDGET APPROVED ($2,000-$5,000)
An unknown polymer needs to be analyzed for its composition. So far we're 99% sure it is not amino acids.
Extremely simple ...

MULTIPLE TESTING
UK Contract Laboratory needed for ISO and ASTM comparison testing to compare different carbon fiber laminate parts for vibration damping. We looked at 3 pot...

MULTIPLE TESTING & PRODUCTS
Third-party polymer testing laboratory needed for testing PET chips and yarn for the following properties:
- %DEG
- C-OOH Group: Carboxyl End Gr...

MULTIPLE TESTING & PRODUCTS
BUDGET APPROVED ($5,000-$10,000)
Seeking an independent polymer testing partner facility to analyze both hot-washed and cold-washed PET flakes.
...

MULTIPLE TESTING
Third-party polymer testing laboratory needed for qualitative polymer identification services using FTIR spectroscopy.
We're interested in identifying moda...

MULTIPLE SAMPLES
Contract polymer testing lab needed for intrinsic viscosity (IV) testing for three samples of PET (polyethylene terephthalate) regrind flakes.
Could you ki...

MULTIPLE SAMPLES & TESTING
LONG-TERM
HUNGARY / EUROPE Contract polymer testing laboratory needed for assessing recycled PET (polyester chips) according to EN 15343 (Use of R...

Looking for a contract lab to perform ASTM D2396−94 (Powder-Mix Time of PVC Resins Using a Torque Rheometer) on various recipes of PVC resins and plasticizers.

URGENT
MULTIPLE PRODUCTS
BUDGET APPROVED ($5,000-$10,000)
ISO 17025 contract GPC/HPLC testing facility needed for the following tests on RPET/PET/PBT yarns and chips. Also,...

MULTIPLE TESTING
Third-Party Laboratory needed for ASTM Biodegradation Comparison Testing of two polypropylene carpets under high-solids anaerobic digestion conditions, with ...

Polymer Laboratory needed for small scale (gram) testing of suitability of mono ethylene glycol for polyester (PET) polymer synthesis to establish if MEG quality is sufficien...

Hi, We are a startup building a B2B recycled plastics trading and supply chain platform.

PCR sample testing against performance KPIs (IV, MFI, Izod, Flex modulus, other AS...

URGENT
BUDGET APPROVED ($1,000-$2,000)
Contract laboratory needed for infrared analysis of fiberglass rod for high voltage polymer insulators.

URGENT
MULTIPLE SAMPLES
UAE Intrinsic viscosity testing needed for some six Polyethylene Terephthalate (PET) samples.
Please advise your feasibility with best possible quot...

MULTIPLE TESTING
MULTIPLE SAMPLES
Third-party plastics and polymer testing laboratory needed for ASTM testing HDPE (High-Density Polyethylene) raw material in Poland, Sweden...

MULTIPLE SAMPLES
Plastics and polymer testing laboratory needed for testing air and dust samples for Bisphenol-A (BPA) using HPLC. I would like to know the cost of service, s...

Contract laboratory needed for physical testing of Ultra-high-molecular-weight polyethylene (UHMWPE) medical-grade polymer. Need to test
melting point, density, tensile stre...

SINGAPORE Third-party polymer testing facility needed for testing two samples of plastic material per the ASTM standards.
In compliance with ISO 799-1:2019(E) 4.5, the plasti...

Independent chemical testing laboratory needed to conduct a Glass transition temperature (Tg) test for epoxy compound.
We request your valuable offer.

MULTIPLE SAMPLES
MULTIPLE TESTING
CANADA Third-party material testing lab needed for shear and abrasion testing (Taber Abrader equipment) on a polyurethane roller. The rolle...

Contract material testing facility needed to figure out what polymer is present in either carbonated water or ocean water.

Korea Contract Laboratory needed for ISO testing of film to ISO 7765-1 Method B film impact strength test. Please provide an estimated timeframe and cost?

Thank you.

Polymer Laboratory needed for identification of polymer in water and ocean water mixture to see if I can patent this chemical process that produced these polymers

URGENT
USA Polymer Laboratory needed for determining thumbprint of properties of a plastic sample to reverse engineer/recreate per military standards.

BUDGET APPROVED ($1,000-$2,000)
USA third-party material testing facility needed to conduct gel time test on a resin sample.

Contract Laboratory needed for Granular Virgin PTFE Resin/ Sheet testing to 3-A Sanitary Standard for Multiple-Use Plastic Materials Test;

Test will cover;
a) Cleanabil...

Third-party testing facility or consultant needed to advise about PFAS regulations in California/USA.
We deliver items (like deco items, christmas trees etc.) to California/U...

Polymer testing laboratory needed to perform melt flow rate (MFR) testing for a polystyrene resin per the ASTM test standards.

Large Corporation needs USA ISO 17025 Contract Laboratories specializing in size exclusion chromatography with multi-angle light scattering (SEC-MALS) testing needed to analyz...

Canada Laboratory needed to perform pressure testing of plastic HDPE tubing of two different sizes:
Ø7/8 OD x Ø11/16 ID
Ø1/2 OD x Ø3/8 ID
Product is a grout tubing for grou...

Polymer Laboratory needed for determining Hindered Amine Light Stabilizer (HALS) concentration in a transparent plastic shroud (polyolefins).
We need to determine whether it...

Accredited laboratory needed to perform ASTM tensile, compression, and shear testing of composite plastic materials used in wind energy industry per the ASTM test standards.

Analytical Laboratory needed for SEC-MALLS/RI method development. We would currently be submitting 2-12 samples/month, however some of our clients are moving towards commerci...

Independent testing facility needed to test Granular Virgin PTFE Resin/ Sheet sample for 3-A Sanitary Standard (SSI) for Multiple-Use Plastic Materials. Test will cover;
a) ...

Contract Laboratory needed for NASA and ISO testing 6 different cables per NASA-STD-6001 ? toxic off gassing per ISO 14624-3:2005. We need six cables tested and are looking f...

Contract laboratory needed for testing two wood polymer adhesive peel and sheet samples per the ASTM test standards.

Contract Laboratory needed for testing to develop the SDS for HF402 and HFX8R

Dental device testing facility needed to test:
1. TF 1 Duralay Temporary Crown and Bridge
(ISO 4049:2019 Dentistry - Polymer Base and Restorative Materials)
Working tim...

Contract Laboratory needed for SAE testing of fluorocarbon (FKM) seals for Fuel tank caps in motorcycles to SAE J2659 Test Method to Measure Fluid Permeation of Polymeric Mate...

MULTIPLE TESTING
Contract Laboratory needed to test hair curling custard ingredients for safety, compatibility, and efficacy. I want to make sure the ingredients aren't only ...

MIDDLE EAST LABORATORY
Contract Laboratory needed for testing recycled polypropylene Granule.

MULTIPLE PRODUCTS
Contract Laboratory needed for Ozon Exposure Testing on rubber and plastic samples ; 100 ppm to 150 ppm by volume, for 2 hours; 9 samples
(Size Max. 75 x ...

Polymer Laboratory needed to perform the relevant ASTM tests (i.e ASTM D6814-02 and / or ASTM D 297-15.) to measure the percentage of devulcanization of a polymer (i.e the r...

MULTIPLE TESTING
Contract Laboratory needed for testing polypropylene recycled granules to match the customer requirement.

Contract Laboratory needed for colour UV resistance testing on PET plastic furniture.

CONSUMER
Consumer would like to test an unidentified recycled plastic/polymer/vinyl mulch that is used at a playground (instead of wood chips or rubber). I would like to anal...

Contract Laboratory needed for chemical composition testing of a silicon rubber sample. Our objective is to acquire as much information as possible to make sure we buy more of...

Contract Laboratory needed for ASTM Total Solar Reflectance testing of a PVC profile, please let me know the ASTM standard and the cost of testing. Also, please let me know th...