Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
URGENT
THAILAND Contract laboratory needed for testing three-section hot sticks per the ASTM F711-02 (Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and T...
Third-party lab needed to conduct the IEC 60601-1 testing (General benchmark standard for medical devices) a patented new CPR (only chest compressions) device operated by a 12...
USA Independent electrical testing facility needed for UL 891 short-circuit testing a switchboard. This is 600VAC, 6000A, and 100kaic (Kilo Ampere Interrupting Capacity).
URGENT TESTING
ISO 17025-certified laboratory is needed for testing of car starter motors. We would like to receive the test report that Amazon requested from us. Do you have...
We are looking to commission a contract lab for the following testing: Root cause analysis (failure mode analysis) for the incident product.
This should include arc failure ...
Please send your competitive offer for the supply of centrifuge Laboratory equipment. Please provide a quotation for the following:
1)100ml centrifuge tube (ASTM Delta Stand...
URGENT
US Independent medical device testing lab (Chicago-based preferred) needed for testing an infusion pump for failure and or improper calibration
URGENT
MALAYSIA Contract medical device testing laboratory needed to e-beam compatible medical device components at (50-60) kiloGrays or (2x 25) kiloGrays (kGy).
MULTIPLE TESTING
Contract laboratory needed to determine the thermal conductivity and the electrical resistance of a graphitic powder sample (I can send the sample to you).
...
Packaging Laboratory needed for packaging, shipment and transportation validation testing of hemodialysis machine These tests may include: - Atmospheric preconditioning (ambie...
Medical Device Laboratory needed for testing cut out performance for a Nailing system product. Product is intended for use with trauma titanium screws.
USA Consumer Products Electrical Safety Laboratory needed for UL Hair dryer safety evaluation to UL 859 Household Electric Personal Grooming Appliances
Electricals and electronics testing facility needed for testing resistor current noise to comply IEC 60195 (Method of measurement of current noise generated in fixed resistors...
MULTIPLE TESTING
MULTIPLE SAMPLES
CHINA ILAC-MRA, CNAS and ISO 17025-certified independent medical device testing laboratory needed for IEC 60601-1 and IEC 60601-1-2 testing...
MULTIPLE TESTING
Contract soil testing facility needed for testing a solid soil sample to confirm there is no contamination so the city landfill accepts the excess soil we ha...
MULTIPLE TESTING
Contract Medical Device Laboratory needed for ISO 10993 testing on Class IIb medical devices, concentrates for bicarbonate hemodialysis:
- Evaluation of the...
Electrical Laboratory needed to x-ray and/or de-cap a small number of integrated circuits (ICs) to diagnose the root cause of some electronic component failures in the wireles...
MULTIPLE TESTING
Contract laboratory needed for a medical device prototype testing for
Platelet Clotting
Bone Graft Handling
Platelet Concentration
Output pH
Output Volu...
California Laboratory to test how their reinforced medical tubing product can be seen under x-ray and fluro in comparison to our competitor products.
Contract Laboratory needed for testing down hole tools and electrical equipment. Testing include thermal cycle, erosion flow, gas, water pressure test etc. Tool size can be r...
Middle East 17025 Certified Medical Device Laboratory needed for testing Ventilator Unit Anesthesia Unit to the following ISO Standards: ISO 18562-1: 2017 ISO 18562-2: 2017 I...
Independent Regulatory Consultant needed in medical devices on the following :
- ISO 11737-1 and 2 (Sterilization of health care products)
- ISO 10993 (Biological evaluation...
Animal lab needed for medical device training course and R&D testing. Will need two lab stations with C-arms and classroom space for 25 people.
Looking for a location close ...
Electrical Product Safety Laboratory needed to provide AS or IEC testing of electricity metering equipment in compliance with IEC 62052 Electricity metering equipment (AC) - ...
Medical Device Laboratory needed for the following ISO performance testing of dental equipment.
Endo
? ISO 6877 2021 Dentistry ? Endodontic obturating
? ISO 3630-1 ENDODON...
Contract Laboratory needed for AAMI testing for a multiparameter device that includes ECG as per AAMI EC53 (2020) Standard. Could you share with us a quote and test availabili...
BUDGET APPROVED ($2000-$5000)
MULTIPLE TESTING
USA Contract Laboratory needed for 1/2 in diameter graphitic carbon discs testing including AFM indenter, Impact toughness, fl...
Europe Laboratory needed for IEC testing of products as per IEC 61823 Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
MULTIPLE TESTING
USA Construction Materials Laboratory needed for testing and analysis of a composite insulation material for identification of its component, property and eq...
Medical Device Laboratory needed for ISO Biocompatibility Studies Testing of a critical care ventilator to the following ISO Test Standards:
ISO 18562-2 Biocompatibility e...
MULTIPLE PRODUCTS
USA Electrical Laboratory needed for compliance testing car charger adapter and bluetooth mouse
Electrical Laboratory needed for UL testing surge protection devices with a prospective short circuit current of 50 kA DC at a no-load voltage of 150 V DC to UL1449 Surge Pro...
MULTIPLE TESTING
Germany Environmental Laboratory needed for complete biodegradability testing in specific by-product (sludge)
1. Initial analytics
The following parame...
Contract Laboratory needed for electrical and photometric measurement testing as per Luminaire LM79 Electrical and Photometric Measurements of Solid-State Lighting Products
Contract Laboratory needed for certification testing of lighting products to the following:
LM-79 certification Electrical and Photometric Measurements of Solid-State Lightin...
MULTIPLE TESTING
China Electrical Laboratory needed for ASTM and IEC testing of electrical tapes, according to IEC 60454-3-1 Pressure-sensitive adhesive tapes for electrical ...
MULTIPLE TESTING
Electrical Laboratory needed for IEC Testing of Dielectric constant/Dissipation factor to IEC 61189-2-721 2.45GHz Test methods for electrical materials, prin...
Contract Laboratory needed for ANSI / AAMI testing of single lead hardwired ECG cable 19 long terminated with a snap-on connector as per ANSI / AAMI EC53 ECG Trunk Cables And...
MULTIPLE TESTING
Medical Device Laboratory needed for validation testing for cleaning chemicals and cleaning methods for Medical device scanner. Our major concern is that o...
MULTIPLE TESTING
ISO 17025 Electrical Compliance Laboratory needed for IEC Certification Testing of EV Charger as per IEC 61851-21-2 (Electromagnetic test). If you have any ...
Electrical Testing Laboratory needed for Thermal Heat Rise ANSI C37.20.2 testing on metal-clad medium voltage switchgear. Testing 2000/2000 5kV vertical section.
MULTIPLE TESTING
Electrical Compliance Laboratory needed for compliance testing of UPS system-based product, which includes AC to DC battery charger, Battery packs
MULTIPLE TESTING
MULTIPLE PRODUCTS
Power Company needs Environmental Laboratory for the following EPA and APHA microbiology and chemistry testing as follows:
2.4 Dichloro...
MULTIPLE TESTING
USA LABORATORY (Wisconsin Lab Preferred)
Third Party Testing Laboratory needed for on site testing of electrical switchgear. Guidance on testing is requir...
MULTIPLE TESTING
FDA GLP Medical Device Laboratory needed for ISO performance, safety, and biocompatibility testing of a new oxygenator model designed for use with CPB Cardio...
USA OSHA and NFPA Compliant Laboratory Service Provider needed for electrical safety deep inspection, certification and voltage determination for laboratory equipment
GERMANY LABORATORY
MULTIPLE TESTING
Contract Laboratory needed for testing heat shrink tubes as per ASTM 2671(Standard Test Methods for Heat-Shrinkable Tubing for Electrical...
FDA GMP Medical Device Laboratory needed for the following electrical testing on electrosurgical devices:
1. Maximum Pulse Current
2. Maximum Current
3. Maximum Current D...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, call us at 1-855-377-6821, e-mail us or view more Laboratory Requests