Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
Need certified polycarbonate (PC) and polyethersulphone (PES) calibration kits for Dynamic Mechanical Analysis (DMA). Do you sell such products?
URGENT
MULTIPLE SAMPLES
USA Polymer Laboratory needed for Polyethylene repro pellets testing tested for substances of very high concern SVHC list of
Reach...
Large Medical Devices Company needs Polymer Laboratory for ASTM spectrophotometer testing or resin pellets as per ASTM E313 for polymer yellowness index determination, ASTM D1...
MULTIPLE PRODUCTS
Contract Laboratory needed for identification of the molecular structure of EPDM rubber gasket material that was used on the railcar hatch pla...
MULTIPLE SAMPLES
USA Plastics laboratory needed for ASTM testing non-phthalate plastisol for conformance per ASTM D4236 (Standard Practice for Labeling Art Materials ...
MULTIPLE PRODUCTS
USA Plastics laboratory needed for testing LLDPE and LDPE repro pellets for extractables and Compliance with SVHC list of REACH, Directive 2011...
URGENT
MULTIPLE SAMPLES
PENNSYLVANIA / USA Materials laboratory needed for ASTM testing foam samples per standard ASTM 2440 (Standard Test Method for Oxidation ...
URGENT
MULTIPLE TESTING
INDIA Biomedical polymer research facility needed for mechanical testing of a polymer-based bone scaffold composite material made of pol...
URGENT
INDIA Nanotechnology Contract Manufacturer needed for synthesizing nanoparticle coating for a peptide.
Looking to outsource the synthesis and would need te...
URGENT
MULTIPLE TESTING
CANADA Polymer Laboratory needed for testing dry-erase PET films to formulate a technical data sheet. The product is an adaptive surface used on whi...
MULTIPLE TESTING
LONG-TERM TESTING
USA Certified laboratory (for FDA clinical data submission) needed to perform fluorometric Prostate Specific Antigen (PSA) analysis using...
MULTIPLE TESTING
Third-Party Laboratory needed for ASTM Biodegradation Comparison Testing of two polypropylene carpets under high-solids anaerobic digestion conditions, with ...
Polymer Laboratory needed for small scale (gram) testing of suitability of mono ethylene glycol for polyester (PET) polymer synthesis to establish if MEG quality is sufficien...
MULTIPLE SAMPLES & TESTING
MULTIPLE PRODUCTS
LONG-TERM
NEW DELHI / INDIA ISO/IEC 17025:2017 polymer testing facility needed for chemical and mechanical testing of plastics.
MULTIPLE PRODUCTS
CALIFORNIA / USA Material testing laboratory needed for outgas analysis of epoxy adhesive per ASTM E595-15 (Standard Test Method for Total Mass Loss and Col...
URGENT
LONG-TERM
MASSACHUSETTS / USA Plastic and polymer testing laboratory needed for Oxygen Transmission Rate (OTR) testing 3D printer plastic films according to ASTM D398...
MULTIPLE TESTING
LONG-TERM POTENTIAL
Looking for a polymer testing lab to test a polyester tape/ribbon per the government specification MIL-T-48260 (Tape, Polyester (For Use...
MULTIPLE TESTING
BUDGET APPROVED ($2,000-$5,000)
An unknown polymer needs to be analyzed for its composition. So far we're 99% sure it is not amino acids.
Extremely simple ...
MULTIPLE TESTING
China Laboratory needed for testing to support UN approval of 2.5 gallon HDPE containers. These containers are sold empty but are then filled with Chlorine....
MULTIPLE TESTING
UK Contract Laboratory needed for ISO and ASTM comparison testing to compare different carbon fiber laminate parts for vibration damping. We looked at 3 pot...
URGENT
Need direct reduced iron ore pellets (size 9-14mm) milled to a fine powder (<50um) using tungsten carbide grinding equipment to avoid iron contamination.
BUDGET APPROVED ($2,000 - $5000)
Private label manufacturer needed to develop a Hair Product, deep conditioner/ Repair mask.
MULTIPLE TESTING & PRODUCTS
Third-party polymer testing laboratory needed for testing PET chips and yarn for the following properties:
- %DEG
- C-OOH Group: Carboxyl End Gr...
MULTIPLE SAMPLES
Contract polymer testing lab needed for intrinsic viscosity (IV) testing for three samples of PET (polyethylene terephthalate) regrind flakes.
Could you ki...
MULTIPLE SAMPLES & TESTING
LONG-TERM
HUNGARY / EUROPE Contract polymer testing laboratory needed for assessing recycled PET (polyester chips) according to EN 15343 (Use of R...
Looking for a contract lab to perform ASTM D2396−94 (Powder-Mix Time of PVC Resins Using a Torque Rheometer) on various recipes of PVC resins and plasticizers.
MULTIPLE PRODUCTS
Contract laboratory needed for mixing and preparing the following silicone polymers for optimal quality silicone in parts per hundred resin/rubber (PHR):
...
URGENT
USA: Very low viscosity non-conductive eclectic resin or glue is needed to use on magnet material to isolate approximately 20 microns of rough surface.
Contract Laboratory needed to test fluorescence intensity from PET film samples.
URGENT
MULTIPLE TESTING
Material testing laboratory needed for testing HDPE (High-Density Poly Ethylene) woven coated fabric for:
- CAN/ULC-S102 (Surface Burning Testing)
...
URGENT
MULTIPLE PRODUCTS
BUDGET APPROVED ($5,000-$10,000)
ISO 17025 contract GPC/HPLC testing facility needed for the following tests on RPET/PET/PBT yarns and chips. Also,...
Contract laboratory needed for Dental Probiotic R&D, production, packaging and shipping.
What is the minimum requirement and Turnaround we're looking at?
We are looking for laboratory services on high-performance liquid chromatography (HPLC). At one of our combined cycle power plants in Italy, the emissions of aldehydes shall b...
Lab partner needed to create customized skincare formulas that align with brand vision:
1. Natural Ingredients: We are committed to using high-quality, natural ingredients th...
URGENT
MULTIPLE SAMPLES
UAE Intrinsic viscosity testing needed for some six Polyethylene Terephthalate (PET) samples.
Please advise your feasibility with best possible quot...
MULTIPLE PRODUCTS
Cannabidiol (CBD), Cannabinol (CBN), Cannabigerol (CBG) Manufacturer needed to manufacture Cannabidiol (CBD), Cannabinol (CBN) and Cabbabigerol (CBG) oil to...
A contract laboratory is needed for the Synthesis of Claramine Trifluoroacetate Salt (SML 1545)
MULTIPLE TESTING
LONG-TERM
BUDGET APPROVED ($10,000-$25,000)
USA Contract laboratory with peptide analysis by Ultra-performance Liquid Chromatography (UPLC) expertise neede...
URGENT
Looking for a lab to work with to formulate a skincare line.
MULTIPLE TESTING
MULTIPLE SAMPLES
Third-party plastics and polymer testing laboratory needed for ASTM testing HDPE (High-Density Polyethylene) raw material in Poland, Sweden...
MULTIPLE SAMPLES
Plastics and polymer testing laboratory needed for testing air and dust samples for Bisphenol-A (BPA) using HPLC. I would like to know the cost of service, s...
Independent metallurgy lab needed for separating and purifying aluminum from iron during melting and molding process. If you have any chemicals to be used in this stage of the...
URGENT
POTENTIAL LONG-TERM
USA Contract FDA laboratory needed as a new reference for either genetic testing or wellness testing (with things like hormones). We will need sam...
Contract laboratory needed for physical testing of Ultra-high-molecular-weight polyethylene (UHMWPE) medical-grade polymer. Need to test
melting point, density, tensile stre...
SINGAPORE Third-party polymer testing facility needed for testing two samples of plastic material per the ASTM standards.
In compliance with ISO 799-1:2019(E) 4.5, the plasti...
Independent chemical testing laboratory needed to conduct a Glass transition temperature (Tg) test for epoxy compound.
We request your valuable offer.
MULTIPLE SAMPLES
MULTIPLE TESTING
CANADA Third-party material testing lab needed for shear and abrasion testing (Taber Abrader equipment) on a polyurethane roller. The rolle...
Contract material testing facility needed to figure out what polymer is present in either carbonated water or ocean water.
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, call us at 1-855-377-6821, e-mail us or view more Laboratory Requests