Laboratory Outsourcing and Scientific Sourcing Center

Looking for a contract lab to perform ASTM D2396−94 (Powder-Mix Time of PVC Resins Using a Torque Rheometer) on various recipes of PVC resins and plasticizers.

URGENT
USA: Very low viscosity non-conductive eclectic resin or glue is needed to use on magnet material to isolate approximately 20 microns of rough surface.

URGENT
MULTIPLE SAMPLES
UAE Intrinsic viscosity testing needed for some six Polyethylene Terephthalate (PET) samples.
Please advise your feasibility with best possible quot...

MULITPLE SAMPLES
MULTIPLE TESTING
LONG-TERM
BUDGET APPROVED ($25,000-$50,000)
Third-party material testing laboratory needed for SEM and TEM (scanning and transmission ele...

Independent chemical testing laboratory needed to conduct a Glass transition temperature (Tg) test for epoxy compound.
We request your valuable offer.

Contract laboratory needed for testing crude sulfate turpentine sample. We need to know the required amount of sample, the duration of the test, whether the methods are accred...

BUDGET APPROVED ($1,000-$2,000)
USA third-party material testing facility needed to conduct gel time test on a resin sample.

Contract Laboratory needed for surface roughness and color stability testing of printed resins milled resins composites

Food Companies looking to purchase antibodies to use in Western Blot to identify the following bovine recombinant proteins derived from E. coli.

Beta casein
Kappa casein
...

MULTIPLE TESTING
Consumer Products Laboratory needed for LHAMA and ASTM Safety Testing of UV cured resin possibly ( art material) as per ASTM D4236 Standard Practice for Lab...

Materials testing laboratory with experience in performance testing of dental materials required for 3D printing dental resin.

MULTIPLE TESTING
Contract Laboratory needed for testing Polypropylene resin as per the following:
1. Melt Flow Index
2. Yellowness Index
3. Nucleator Percentage and GMS ...

Large Corporation needs Contract Laboratory for flashpoint testing of acrylic polymer dissolved in butyl acetate.

MULTIPLE PRODUCTS
Contract Laboratory needed for DIN testing multiple PMMA testing for determination of half value angle for light diffusion PMMA resin lens material accordin...

MULTIPLE TESTING
EUROPE LABORATORY
Europe Polymer Laboratory needed for comprehensive testing of rPET (Recycled Polyethylene Terephthalate) resins including food migration ...

MULTIPLE TESTING
Consumer Products Safety Laboratory needed for safety and toxicity testing of glow-in-the-dark cured resin product l used in 'decor art' products, targeted t...

UK LABORATORY
UK Laboratory needed for adhesive testing of resin from trees

USA LABORATORY (GA or AL preferred)
MULTIPLE PRODUCTS
MULTIPLE TESTING
Polymer Laboratory needed for Melt Flow Index testing on various different formulas of thermoplastic ...

MULTIPLE PRODUCTS
MULTIPLE TESTING
Polymer Laboratory needed for propylene feed samples (from a refinery) testing to determine the purity. Our feed is mainly 98% propylene w...

CONSULTING
MULTIPLE TESTING
Contract Laboratory needed for testing a product line of organosiloxanes - designed to improve impact modification, appearance, adhesion, and wat...

Contract Laboratory needed for testing a vapor pressure analysis with the Knudsen method at specific temperatures, for a large aeronautics firm. Thanks in advanced.

MULTIPLE PRODUCTS
MULTIPLE TESTING
Contract Laboratory needed for testing resin products to confirm if it is indeed classified as marine pollutant as Class 9 environmentally...

MULTIPLE PRODUCTS
MULTIPLE TESTING
Polymer Laboratory needed for testing polyurethane materials for chemical content and potential of hazardous materials. We want to ensure ...

MULTIPLE PRODUCTS
Polymer Laboratory needed for testing for hydroxyl value for 2 resin materials. Would like to get a price and estimation of time.

Polymer Laboratory needed for testing xylene soluble for polypropylene resin.

USA LABORATORY (Illinois preferred)
MULTIPLE PRODUCTS
MULTIPLE TESTING
USA Contract Laboratory needed for testing and characterization of resin materials, and compare the o...

Manufacturer needs Independent THird-Party Laboratory for Colour APHA testing of a chemical produced from two different suppliers according to ASTM D 1209 or a similiar testi...

I would like a HPTLC test for for several types of tree resins. The 3 types are tree resins are frankincense, myrrh and dragon's blood.

Polymer Laboratory needed for polyethylene analysis to determine how much recycled resin is present. I was wondering how much would the cost be?

USA LABORATORY
USA Geology Laboratory needed for purity level testing on sample of Ambergris

USA LABORATORY (California Preferred)
MULTIPLE TESTS
Contract Laboratory needed for STYRENE and BPA testing from a part 2 epoxy resin (a 1 OZ bottle).

I would appreciate ...

USA LABORATORY
MULTIPLE TESTS
Advanced Technology USA Electrical Laboratory needed for IEC Testing of Resin plaques for Ball Pressure and Glow Wire Ignition test according t...

USA LABORATORY (Eastern USA Preferred)
LONG-TERM TESTING (2-3 Samples/Month)
MULTIPLE PRODUCTS
MULTIPLE TESTS
USA Contract Laboratory needed for Trace metal testing for ir...

MULTIPLE TESTS
Contract Laboratory needed for resin and a plastic film samples testing for Slip/erucamide content

CANADA LABORATORY (Ontario Preferred)
MULTIPLE TESTING

Canada Materials Laboratory needed for the following ASTM Testing of Sheet molding compound SMC fiberglass 12 c 12 ...

Polymer Laboratory needed for chemical analysis of the constituents of an unsaturated polyester resin, styrene based

UK LABORATORY (Preferably Lancashire)
UK Laboratory needed for Ambergris confirmation testing. thank you

MULTIPLE TESTS
Materials Laboratory needed for fire behavior properties of unsaturated polyester resins. The necessary tests are:
- Determination of oxygen index - ISO 4589-...

USA LABORATORY
USA Materials Laboratory needed for Polymer Testing for the water extraction condition as per TSM0505G-2A for the following resins.

1. Encom 1812U
2. Encom...

MULTIPLE TESTS
Materials Laboratory needed for PS. 50014 resin approval test of FCA with Plating molding.
Test items are Appearance, adhesion (Saw Grind Test, Thermal Cycle ...

MULTIPLE PRODUCTS
MULTIPLE TESTS
USA Materials Laboratory needed for the following fabric reinforcement testing of resin laminates

1. Resin Solids
2. Volatiles
3. Flow...

USA LABORATORY (California Preferred)
USA Materials Laboratory needed for the following testing on Polypropylene Regrinds
Item Condition Value
Melt Flow 230C/2.16kgs g/10...

Analytical Test Laboratory with Quick Turn-Around TIme (TAT) needed for pesticide or insecticide residue testing on plastic resin (pellets and or plastic film

MULTIPLE TESTS
Medical Device Contract Research Organization needed for medical resin testing for the following standards:
ISO 4049 Polymer-based restorative materials
ISO ...

Manufacturer needs Contract Laboratory for biodegradability testing of adhesives tapes along with cellophane as film and rubber and resins based adhesive. Please email us fo...

Contract Materials Laboratory needed for AASHTO Standard Specification Testing for Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Co...

Microbiology Laboratory needed for ISO anti-microbial and anti-viral testing of decorative laminates made of superimposed layers of paper impregnated with thermosetting resins...

Medical Device Laboratory needed for physical testing of injection molded medical device that incorporates a colorant in the resin. I need to have the physical properties tes...