Laboratory Outsourcing and Scientific Sourcing Center

Polymer Laboratory needed for ASTM Testing to 3 ASTM Standards: ASTM D5526
ASTM D5988
ASTM D6691

Materials Laboratory needed for ASTM testing of EPDM rubber waterproofing membrane based on ASTM D4637(Type I) requirements

LONG-TERM TESTING Disposable plastics company needs microbiology laboratory for ASTM biodegradability testing of a wide range of plastic disposable products to ASTM D5511-11 S...

Polymer Laboratory needed for conducting study on how moisture can affect the 3D printing process and/or mechanical process of photo-active resins. Moisture/water can have a n...

LONG-TERM TESTING Materials Laboratory needed for acoustics properties and sound absorption evaluation of polymer composite sheets of size (250 mm X 380 mm) approximately of ...

Materials Laboratory needed for critical micelle concentration(CMC) curve using Dynamic Tensiometer (DCAT) for STD polyurethane resin versus surfactants

LONG-TERM TESTING R&D Polymer Laboratory needed for determining the index of refraction of polymeric system (a flat solid sheet) on 10-20 samples.

ISO 17025 Accredited Toxicology Laboratory needed for biodegradability and toxicity testing of biodegradable plastic to validate biodegradability and non-toxic claims to plant...

Polymer Laboratory needed for ASTM testing of polypropylene fibers to meet ASTM standards C1116/C116M, C1609, D638, and any others that may need to be done on this product.

Materials Laboratory needed for chemical analysis of polypropylene fabric to the below specifications:

1. UV content analysis. we wish to know the exact active UV stabiliz...

LONG-TERM TESTING US Company needs Polymer Laboratory with Erichsen 430P tester to test the scratch resistance of automotive molded plaques per the Volkswagen method of PV3952...

Polymer Laboratory needed for gathering kinetic or concentration data on a polymerization reaction that occurs in our formulation. Similar to the data gathered by the Mettler ...

Pharmaceutical company needs laboratory for USP compendial testing of HDPE Bottle as per Current USP 661.1 & 661.2 compliance methods.,

Polymer Laboratory needed for ASTM thermal conductivity testing of epoxy polymer matrix composites

PRODUCT DEVELOPMENT Laboratory needed for pilot plant scale polymerization trials to develop new products of a reactor system of 50-100 gallons size capacity. Since the pentan...

Plastics Laboratory needed for urethane testing to HKMC spec MS300-55 (release of volatile organic compounds) testing on a UVA-cured acrylated urethane.

Polymers Laboratory needed for conducting an environmental simulation study on polycarbonate headlight lens of an led headlight for freezing rain and snow. to see if the snow ...

Materials Laboratory needed for the determination of total mass loss and collected volatile condensable material from outgassing in vacuum environment of polymer material

Polymer Laboratory needed for polythene film testing for the presence of Tris Nonylphenyl Phosphate ) & 4-np free (P-nitrophenol) in the polythene film.

Polymer laboratory needed for rheology testing to determine the viscosity on Polyamide 06. Is this possible at your end ?

Plastics laboratory needed for gamma ray irradiation and measurement of light transmittance in PET bottles used in food and beverages. For measurement of light transmittance, ...

Polymer laboratory needed for laser transparency testing on plastic nylon parts.The values of laser transparency apply on every 12 points located on the diameter Ø36 with the...

Materials laboratory needed for ISO polypropylene testing: charpy impact strength analysis according to ISO 179-2/1eU for Notched and unnotched Polypropylene specimen at 23C

LONG-TERM TESTING Materials laboratory need for optical testing of polycarbonate resin lenses for transmittance, visible light wavelength blocking, and various other measureme...

PRODUCT DEVELOPMENT Polymer laboratory needed for product development of hot glue product from photopolymer waste material

Polymer laboratory needed for Forensic and Root Cause analysis of the manufacturing of RF welding of vinyl PVDF AND PVC materials

Large Pharma needs polymer laboratory to study and develop new blends of polymers including the characterization (mechanical, physical) of the produced blends and supply of sa...

Materials laboratory needed for preparation and evaluation of the resulting properties of an elastomer (styrene + isoprene) when mixed with some ceramic fillers (BaTiO3 and ot...

Research group needs polymer laboratory for fatigue crack growth rate measurements on transparent composite polymer specimens at low and high temperatures.

LONG-TERM TESTING Polymer laboratory needed for viscosity testing and CT Scanning of automotive molded parts.

Plastics laboratory needed for shrink film testing for:
puncture thumb edge, puncture sharp edge, tear strength and haze

URGENT Materials laboratory needed for ASTM Testing in Geomembranes to ASTM D 1505 ASTM D 599 ASTM D 1004 ASTM D 4833 ASTM D 5596 .

Plastics laboratory needed for ASTM testing of plastic film and sheeting for water vapor using a modulated infrared sensor to ASTM F1249-13 test method for water vapor transm...

Polymer laboratory needed for ASTM testing for determination of Carbon Black in vinyl compound to ASTM D3349 , Standard Test Method for Absorption Coefficient of Ethylene Poly...

Environmental toxicology laboratory needed for eco-toxicity testing on a pipe liner to be used in culverts in California.

Polymer laboratory needed for testing water vapors and oxygen gas permeability testing of new improvement in barrier of food packaging films made by blending two polymers.

Materials laboratory needed for UV resistance testing in HDPE Corrugated Flexible Pipe used as an electrical conduit

Polymer laboratory needed forGas chromatography mass spectrometry GC-MS analysis to determine the organic purity of 2-Octyl cyanoacrylate monomer using with Agilent 7820A or...

Materials laboratory needed for ISO creep testing under compression as per ISO 8013, Rubber, vulcanized -- Determination of creep in compression or shear

Polymer laboratory needed for measuring the vapor pressure of some poly(ethylene glycol)-substituted siloxanes to determine the vapor pressure at a few temperatures.

Packaging company needs laboratory for overall migration limit testing on 8 different plastic products including shrink film and PET for the specific limits of heavy metals, p...

Construction materials company for agriculture needs polymer laboratory to test content analysis of PVC

URGENT TESTING Polymer laboratory needed for certificate of analysis COA testing required on three polymer products used in waste water treatment. Testing results needed by S...

Medical Device company needs packaging laboratory for transportation simulation studies of polypropylene and polyethylene medical devices with a shelf life of 5 years.

Polymer laboratory needed for Fourier transform infrared spectroscopy (FTIR) analysis on a polypropylene product.

Petrochemical company needs laboratory for ASTM sand slurry testing for ultra-high-molecular-weight polyethylene UHMWPE per ASTM 4020 Standard Specification for Ultra-High-Mol...

New distillery needs laboratory for stability testing of alcoholic beverages in aluminum cans for the integrity of the water-based polymer lining of the can

Materials laboratory needed for comparison study of the Coefficient of Friction (COF) of two lubrication sticks according to BS EN - Annex L.