Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
MULTIPLE TESTING & PRODUCTS
BUDGET APPROVED ($5,000-$10,000)
MICHIGAN (Metro Detroit area) Automotive Laboratory needed for FMVSS performance testing of GM tail lamps per ...
Medical Device Laboratory needed for testing cut out performance for a Nailing system product. Product is intended for use with trauma titanium screws.
MULTIPLE TESTING
USA Independent automotive testing facility needed for Federal Motor Vehicle Safety Standards (FMVSS) 108 Certification testing.
- Sensitivity Testing ...
MULTIPLE SAMPLES
MULTIPLE TESTING
CANADA Third-party material testing lab needed for shear and abrasion testing (Taber Abrader equipment) on a polyurethane roller. The rolle...
Contract laboratory needed to run side-by-side comparison testing with three to five ship auger drill bits so we could see where ours stood in the competition.
We are looking...
Contract Laboratory needed for testing 2 pcs of 200mm circular saw blade as per BS EN 13236 standard. The recent batch of saw blades we imported have broken and the flying bro...
MULTIPLE TESTING
Automotive Laboratory needed for UNECER testing of 12meter coach bus accordance to UNECER 51.03 Uniform Provisions Concerning the Approval of Motor Vehicles ...
MULTIPLE TESTING
LONG-TERM TESTING
Large Manufacturer needs External Test Laboratory for developing and executing a test plan for some combined environmental and dynamic loa...
USA LABORATORY (California Lab)
MULTIPLE TESTING
USA Contract Laboratory needed for Department of Environmental Health filter testing for water based paint spray booth filt...
MULTIPLE PRODUCTS
MULTIPLE TESTING
Mechanical laboratory needed for evaluating and testing agricultural sprayers, drippers, pipes and electric valves
Production Company needs Certified Volvo Supplier Laboratory for testing products.
COntract Laboratory needed for a couple of FTIR tests.
Contract Laboratory needed for ANSI Testing of screws for the following on 1700 screws.
TEST METHOD: MAGNETIC PERMEABILITY SHALL
BE MEASURED IN ACCORDANCE WITH ASTM A342/...
Contract Laboratory needed for ISO agricultural hose testing to ISO 9261.
ISO 9261
CANADA LABORATORY
Hardware company needs Contract Laboratory for comparison study of Shank Hardness of 12 different drill bits. Thanks in advance.
Automotive Laboratory neee for DIN Testing of air brake tube to Din 73378 standard Polyamide tubing for motor vehicles. . Please provide cost.
USA LABORATORY
MULTIPLE PRODUCTS
MULTIPLE TESTS
Large company needs USA Materials Laboratory for ASTM and ISO testing of rubber per ISO 2782 (Permeability), ASTM C177 or I...
MULTIPLE PRODUCTS
Automotive Laboratory needed for General Motors Specification Testing to GM15787 specification Vehicle Exterior and Add-On Parts Paint Appearance Requiremen...
Automotive Laboratory needed for FMVSS 121 Federal Motor Vehicle Safety Standards No. 121; Air Brake Systems testing
BUDET APPROVED (7,000EURO)
LONG-TERM TESTING
MULTIPLE PRODUCTS
MULTIPLE TESTS
Europe Industrial Laboratory needed for conformance testing of hand tools:
1. 500 hand too...
UK LABORATORY
United Kingdom Electrical Laboratory needed for BS Testing of insulated tools to BS8020:2019 Tools for live working. Specification for insulating hand tools for...
COntract Laboratory needed for NATO STANAG 2897 Annex C testing of non-magnetic tools to be used in explosive ordnance disposal (EOD)
Automotive Laboratory needed for ANSI Testing to ANSI Z26.1,Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety...
Contract manufacturer needs Automotive Laboratory for quoting on a large order of custom hinges (end use military application) first article inspection including longitudinal ...
USA Automotive Laboratory needed for certification of motor vehicle parts to specifically adult car seat safety to FMVSS.
Automotive Laboratory needed for Federal Motor Vehicle Safety Standards FMVSS pull testing of modified vehicle seats to FMVSS 207 49CFR 571.207 Seating Systems
Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static rolling ability
coastin...
Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
for Glazing Motor Vehicles...
Automotive laboratory needed for FMVSS flammability testing according to FMVSS 302, Flammability of materials used in the occupant compartments of motor vehicles
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recomm...
Glass laboratory needed for ballistic impact testing to meet NATO standards 1, 2, or 3 to MIL SPEC Level 4.
Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in ...
Automotive laboratory needed for UNECE vehicle safety testing automotive anti-lock brakes according to ECE R13H.
Engineering laboratory needed for testing of automotive sensors according to IPX9K of (24) Automotive Sensors approx. 25mm OD X 45 mm long. A slight variation to the spec is n...
Oil Laboratory needed for product development testing of diesel and gasoline additive combination with methanol. Previous studies showed the Binding of the emulsion proved elu...
Power company needs Laboratory for engine ash deposits testing taken from GE Jenbacher Gas engines.
Automotive laboratory needed for VW Testing toVTL 956 (VW Test Requirements for reflectors
Large automotive company needs packaging laboratory for ISTA industrial packaging resistance testings labs (norm ISO-13194 or ISTA 2B/3E or local norm for at least stacking co...
ISO or A2LA Automotive Laboratory needed for SAE testing of brake lines. Testing per SAE J1047, Tubing - Motor Vehicle Brake System Hydraulic
Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in (3) places on (3) Cold R...
Automotive parts manufacturing company needs testing of a lubricant certification per ASHRAE -97. The lubricant is a solvent based deforming product that must be compatible wi...
Automotive laboratory needed for VW Standard testing to measure colour and reflectivity in accordance to VW 50190, Components of the Vehicle Interior Trim
Automotive laboratory: needed for Volkswagon weather testing of polyethylene PE foam per VW 50185It
weathering test following TSM0501G with Suga machine model : WEL-SUN-HCH type sunshine Weather-O- meter for the following: 1 Discharge voltage ( V) Range 48 to 52 Mean 50+ 2%...
Automotive testing for back up lighting: SAE J593
Laboratory needed for SAE Testing to SAE J1684, Test Method for Evaluating the Electrochemical Resistance of Coolant System Hoses and Materials
Electrical Laboratory needed for conformance testing of automotive spark plug cables:
ISO 3808 (or SAE J2031) for Spark Plug Cable. ISO 3808 or SEA J2031 when imports ?Spa...
Physical Laboratory needed to perform weathering testing on our plastic according with VW standard PV 3930. Exposure time should be 1500 h. We do not need evaluation after tes...
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, call us at 1-855-377-6821, e-mail us or view more Laboratory Requests