Laboratory Outsourcing and Scientific Sourcing Center

Electrical Testing Laboratory needed for Thermal Heat Rise ANSI C37.20.2 testing on metal-clad medium voltage switchgear. Testing 2000/2000 5kV vertical section.

Engineering Company needs Contract Test Laboratory for conducting Thermal conductivity test for nano fluids silicon carbide and alumina. We need thermal conductivity test for ...

Contract Laboratory needed to measure coefficient of Thermal Expansion of Carbon Nanotube reinforced Aluminum Metal Matrix Composites as per ASTM

Materials Laboratory needed for ASTM thermocycling testing for Polyethylene Aluminium Composite Pipe according to ASTM F1282-2010 standard's requirement. How much does it cost...

Manufacturer needs Materials Laboratory for ASTM testing of glass bottles and glass jars exported to the US markets.as per ASTM ( AMERICAN STANDARD TESTING MATERIAL) F 2179 C...

LONG-TERM TESTING Industrial Laboratory needed for thermal conductivity testing by laser flash method for metals as per standard ASTM: E1461-13. Thermal conductivity and therm...

Materials Laboratory needed for thermal conductivity testing and heat capacity testing on Insulation pulverized limestone products

Performance Laboratory needed for thermal testing (EN342 rating) for our range of thermal clothing (jackets and trousers) and thermal gloves (EN511 rating).

LONG-TERM TESTING Aerospace Laboratory needed for ASTM Jet fuel testing (Jet-A) for its lower heating value (net heat of combustion) using experimental methods. There would b...

LONG-TERM TESTING Construction Materials Laboratory needed for ASTM Testing of insulating sheets and tubes to ASTM C534 Standard Specification for Preformed Flexible Elastomer...

Polymer Laboratory needed for ASTM thermal conductivity testing of epoxy polymer matrix composites

Consumer Products Laboratory needed for performance testing for thermal resistance measurement (CLO value) of an insulated pair of pants.

Materials Laboratory needed for ASTM thermal conductivity testing for thermal insulation of stone wool product. ( Rock wool)

Metallurgical laboratory needed for ASTM stress testing of 4 products to ASTM G186, Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause S...

Laboratory needed for ANSI testing a pilot and thermocouple assembly to ensure that it meets ANSI Z21.77 for Piezo-Electric Spark Ignitors and ANSI Z21.92 for Manually Operate...

Research facility needed to determine the reaction kinetics for the thermal cracking of a petroleum oil

Analytical chemistry laboratory needed for ASTM testing of chemicals to ASTM D7863, Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

Laboratory needed to measure thermo-physical properties of fuel additive mixtures containing ethylene, vinyl acetate and cyclohexane. Properties to measure include: critical ...

Consumer Products performance laboratory needed to measure the Clothing and Thermal Insulation (CLO) value on synthetic thermal insulated pillows

Materials laboratory needed for measuring heat insulation properties of clothing insulation to the current industry standard for hand warmers. The laboratory would need to be ...

Automotive materials laboratory needed for SAE thermal insulation testing to SAE J 2302 Thermal Effectiveness of Sleeve Insulation.

University research scientist needs materials laboratory for thermal conductivity testing of composites across varying temperature ranges.

Plumbing company needs metallurgical laboratory needed for ASTM Testing of brass plumbing parts to the ASTM B858 standard for stress corrosion cracking, specifically looking f...

Medical Device laboratory needed for physiochemical testing including thermal, mechanical and dynamic analysis to support the development of a new transdermal patch. Studies t...

Materials certification laboratory needed for thermal conductivity testing of lightweight concrete to ASTM C177 Steady-State Heat Flux Measurements and Thermal Transmission Pr...

Materials laboratory needed for ASTM Thermal Stiffness property testing as per ASTM D 1043 Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion...

Materials laboratory needed for thermal conductivity testing of an automotive thermal cover as per Ford specifications WSSM9932B (3.9.1): Thermal Conductivity (C518) and (3.9...

URGENT TESTING Laboratory needed for corrosion testing of metals to ISO 6509 on faucet shanks. ISO 6509-2:2017 specifies assessment criteria and provides guidance related to t...

Materials laboratory needed for ASTM thermal conductivity testing of plastic roofing product to ASTM C518 (Standard Test Method for Steady-State Thermal Transmission Propertie...

Automotive laboratory needed for fatigue testing of automotive components under cycles Thermal. Temperature range: -40 ° C to +180 ° C Humidity range: 20% to 95% (+ 20 ° C to ...

Laboratory needed for research experiment for the evaluation of an agrocrop-based absorbent's effect on the flash point of oils.

LONG-TERM TESTING Medical device materials laboratory needed for ASTM testing: active Af temperature of wire using DSC per ASTM F2004, Standard Test Method for Transformation...

Materials laboratory needed for expanded rubber testing studies to three DIN EN ISO Standards:
- Coefficient of thermal conductivity according DIN EN ISO 8497,
- Water vapo...

Electrical laboratory needed for ASTM testing of U-PVC cable ducts for shore hardness (type D) to ASTM D 2240, coeffecient of linear thermal expansion to BS 3505/ 3506/ ASTM D...

Construction laboratory needed for materials and toxicity testing of naval thermal insulation testing to various standards including: NCD 1427 : SPECIFICATION FOR MINERAL WOOL...

Polymers laboratory needed for thermal, dielectric, and insulating testing for properties of two components polyurethane resin according to the following standards:

Dielec...

Materials laboratory needed for softening point and/or heat deflection point of several polyurethane based polymers.

Metallurgical laboratory needed for micro structure study of differing layers of zinc on zinc-coated reinforced bars (re bars).

Materials Laboratory needed for testing on a steel grade silica ceramic blanket.

Flammability to ASTM F 1462.

Thermal Conductivity to ASTM C518-19983.

Thermal Shock...

LONG-TERM TESTING Laboratory needed for ongoing and yearly proof testing of various hose assemblies to IAW SAE J2064 using an inert gas and cleanliness testing IAW SAE J2064 t...

Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.

Plastics / Materials Laboratory needed for ASTM physical testing of plastic crates from different suppliers including:
Raw material tests as per ASTM D4976 + ASTM D5203, dens...

Construction company needs materials laboratory needed for ASTM testing of insulation material to ASTM C1371 Standard Test Method for Determination of Emittance of Materials ...

Oil laboratory needed for pour point verification testing of a fatty acid based emulsifier using ASTM D97 compared to ASTM D5949. Result for both.

Metallurgical laboratory needed for chemical composition testing of a magnesium in-ground anode per ASTM B954-15 and meeting the specification requirements of ASTM B843, Grade...

Analytical Chemistry laboratory needed for vapor pressure testing of liquid disinfectant products.

Laboratory needed for Copper slag testing (Fe0:SiO2, Fe3O4, Cu2S) flotation - grindability, final size requirement for copper floatation with good recovery.

Food laboratory needed for antioxidant testing of a food product.