Laboratory Outsourcing and Scientific Sourcing Center

Contract Laboratory needed for JIS testing of a paint film sample against coronavirus according to JISZ2801

MULTIPLE PRODUCTS
MULTIPLE TESTS
Contract Laboratory needed for antimicrobial and antiviral effectiveness testing of polyester adhesive films on a variety of hard surfaces s...

EUROPE, ASIA OR USA LABORATORY
URGENT
Chemical Company developing anti-microbial film needs ISO/IEC 17025 Accredited Microbiology Laboratory for ISO 21702 antiviral effect...

Contract Laboratory needed for ISO antiviral properties testing on the plastic films.
preferably anything similar to ISO
ISO21702 film testing
ISO18184 fabric testing

Microbiology Laboratory needed for ISO 21702 and ISO 18184 anti-virus activity and efficacy testing of anti-microbial copper film used on
surface areas such as door knobs, e...

Contract Laboratory needed for anti-viral effectiveness testing of film coating to determine if they are anti-virucidals.

Life Sciences Company needs Bioanalytical Laboratory needed that can test and confirm presence of RNase and DNase enzymes in a sample laminate material (ie. plastic film)

Microbiology Laboratory needed for JIS anti-viral efficacy test on new paint coating on PE film according JIS-Z 2801 for inhibition to the growth of viruses such as Coxsackiev...

Metallurgical laboratory needed for ASTM stress testing of 4 products to ASTM G186, Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause S...

Plumbing company needs metallurgical laboratory needed for ASTM Testing of brass plumbing parts to the ASTM B858 standard for stress corrosion cracking, specifically looking f...

URGENT TESTING Laboratory needed for corrosion testing of metals to ISO 6509 on faucet shanks. ISO 6509-2:2017 specifies assessment criteria and provides guidance related to t...

LONG TERM TESTING. Materials laboratory needed for thermal imaging of coating for reflectivity tests to extract emissivity number using a diffuse gold standard. Coating is use...

Plastics Laboratory needed for Automotive Materials Testing to GMW14797 APOP Painted Plastic Parts Performance Requirements

Metallurgical laboratory needed for micro structure study of differing layers of zinc on zinc-coated reinforced bars (re bars).

Materials Laboratory needed for testing on a steel grade silica ceramic blanket.

Flammability to ASTM F 1462.

Thermal Conductivity to ASTM C518-19983.

Thermal Shock...

Medical Device (Optics) laboratory needed for analytical chemistry testing of potential contaminants in a product coating liquid via NMR and FTIR. GC/MS may also be necessary...

Materials (textiles) laboratory needed for protective clothing testing to check the cut resistance of protective textiles to ASTM 2992 or F1790 using TDM 100 cut machine.

Water agency needs Metallurgical Laboratory needed for corrosion testing including pitting depth from corrosion on 1 Type K Soft copper tubing.

Metallurgical laboratory needed for chemical composition testing of a magnesium in-ground anode per ASTM B954-15 and meeting the specification requirements of ASTM B843, Grade...

Materials laboratory needed for ASTM Testing for waterproofing of a membrane to ASTM C836, Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Wate...

Laboratory needed for Copper slag testing (Fe0:SiO2, Fe3O4, Cu2S) flotation - grindability, final size requirement for copper floatation with good recovery.

GLP metallurgical laboratory needed for AOAC 2006.03 standard or EPA6010/6020 testing for Aresenic, Cadmium, Cobalt, Molybdenum, Nickel, Lead, Selenium, and Zinc.

Also, nee...

Materials Laboratory needed for AASHTO testing of Architectural coating Material to Chloride penetration test (AASHTO T259, T260) Rapid chloride Permeability AASHTO T277 C02 P...

Personal protection equipment (PPE) laboratory needed for ASTM F2992 cut resistance testing of a stainless steel mesh using a TDM-100 machine.

Packaging laboratory needed for food contact surface testing for compliance to EU regulation (EN) 602/2004 testing of an aluminium wire to comply with food contact material.

Metallurgical laboratory needed for testing of bolt encapsulation material substance.

Material science laboratory needed for fatigue testing of rebar and couplers according to British Standard.

ASTM metallurgical laboratory needed for testing gold plated coupons made with copper or aluminum bases for Thickness, Purity, Hardness, Appearance, Adhesion, Corrosion resist...

Metallurgical laboratory needed for ISO 9227 testing of metals.

Metallurgical laboratory needed for stainless steel and an oxide powder testing using Atomic Emission Spectroscopy ICP AES.

Engineering laboratory needed for performing coefficient of thermal expansion testing.

Metallurgical testing laboratory needed for determining recovery of Cu and Au in Cu - Au Skarn Ores and Mineralised Diorites

Materials Laboratory needed for AASHTO testing of Architectural coating Material to
Chloride penetration test (AASHTO T259, T260)
Rapid chloride Permeability AASHTO T277 ...

Materials laboratory for ASTM paint testing 1. Anti-carbonation: Test method EN-1062-7
2. Liquid water permeability: Test method EN-1062-7
3. Acid Resistance . 4. SRI (solar...

Environmental Simulation Laboratory needed for paint plastic cans testing for 28 days at stacked conditions to simulate summer test simulation
at day time 45 to 48 degree c,...

Large company needs Optical Properties of 1 cm lenses tested for the following: Transmittance, Comatic Aberration, Veiling Glare Index, Lens Flare, Ghost, Halo (ISO 9358-199...

Coatings company needs materials laboratory for DIN rubber coatings testing to DIN 53 504 Tensile strength test, DIN 53 507 Tearing resistant test and DIN 53 516 Abrasi...

Metal Fittings company needs microbiology laboratory for biocidial efficacy testing of product surface testing according to EN ISO 22196 and TS EN 15457 standards. We are a ...

Large steel design company needs materials laboratory for ASTM testing of various coating materials per ASTM standards including:ASTM 673, ASTM A153, ASTM B695, ASTM B571, and...

FDA 175.300 and ISO 17025 accredited laboratory needed to test polymeric coating samples for repeat use with food contact, in order to use it to line food processing tanks and...

Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in (3) places on (3) Cold R...

On site analysis needed in India of rock deposit for precious and semi precious metals and for gem stone.Black Rock with quartz bands seen in our field, so need to analyze the...

Metallurgical Laboratory needed for XRD on metal samples to solid (cast) form with high ferroalloy content to determine the carbides and alloy phases that
gave my hardfacing...

ISO metallurgical laboratory needed for surface roughness testing on Aluminum. Quantity: 10 - 15 pcs, size 120 mm x 95 mm. Material: Aluminum.
Surface finish Rz and Ra.

Manufacturer needs laboratory for new product development testing of new coating to be used in the abatement of surfaces that contain lead based paint. Testing to ASTM E1975, ...

Laboratory needed for certification of compliance to Type Testing to IEC 60974.13, Arc welding equipment - Part 13: Welding clamp

Large company needs Laboratory for coating testing to ASTM E2178,Standard Test Method for Air Permeance of Building Materials

Analytical Chemistry Laboratory needed for polyurea powder testing for residual formaldehyde: