Contract Laboratory has received the following Laboratory Requests which need to be fulfilled! These Laboratory Requests are received from a variety of sources ranging from start-up companies to large, multinational Fortune 500 corporations, international organizations, well-respected universities and government agencies that are actively seeking Labs to perform their Laboratory and Scientific Research. If you need a Laboratory, please Submit a Laboratory Request. If you need assistance or have questions contact us online or call toll free 1-855-377-6821. Please log in to see more.
MULTIPLE TESTING
USA Independent automotive testing facility needed for Federal Motor Vehicle Safety Standards (FMVSS) 108 Certification testing.
- Sensitivity Testing ...
MULTIPLE TESTING
Automotive Laboratory needed for UNECER testing of 12meter coach bus accordance to UNECER 51.03 Uniform Provisions Concerning the Approval of Motor Vehicles ...
Automotive Laboratory neee for DIN Testing of air brake tube to Din 73378 standard Polyamide tubing for motor vehicles. . Please provide cost.
MULTIPLE PRODUCTS
Automotive Laboratory needed for General Motors Specification Testing to GM15787 specification Vehicle Exterior and Add-On Parts Paint Appearance Requiremen...
Automotive Laboratory needed for FMVSS 121 Federal Motor Vehicle Safety Standards No. 121; Air Brake Systems testing
Automotive Laboratory needed for ANSI Testing to ANSI Z26.1,Safety Glazing Materials for Glazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways - Safety...
Contract manufacturer needs Automotive Laboratory for quoting on a large order of custom hinges (end use military application) first article inspection including longitudinal ...
USA Automotive Laboratory needed for certification of motor vehicle parts to specifically adult car seat safety to FMVSS.
Automotive Laboratory needed for Federal Motor Vehicle Safety Standards FMVSS pull testing of modified vehicle seats to FMVSS 207 49CFR 571.207 Seating Systems
Automotive Laboratory needed for first edition of vehicle performance test methods including:
test of vehicle centroid height
test of vehicle static rolling ability
coastin...
Automotive laboratory needed for ANSI testing of glazing materials (glass) to ANSI Z26.1, American National Standard
for Safety Glazing Materials
for Glazing Motor Vehicles...
Automotive laboratory needed for FMVSS flammability testing according to FMVSS 302, Flammability of materials used in the occupant compartments of motor vehicles
Plumbing company needs metallurgical laboratory needed for ASTM Testing of brass plumbing parts to the ASTM B858 standard for stress corrosion cracking, specifically looking f...
URGENT TESTING Laboratory needed for corrosion testing of metals to ISO 6509 on faucet shanks. ISO 6509-2:2017 specifies assessment criteria and provides guidance related to t...
Metallurgical laboratory needed for micro structure study of differing layers of zinc on zinc-coated reinforced bars (re bars).
Materials Laboratory needed for testing on a steel grade silica ceramic blanket.
Flammability to ASTM F 1462.
Thermal Conductivity to ASTM C518-19983.
Thermal Shock...
Metallurgical laboratory needed for chemical composition testing of a magnesium in-ground anode per ASTM B954-15 and meeting the specification requirements of ASTM B843, Grade...
Electrical laboratory needed for SAE compliance testing of optical warning devices used on authorized emergency, maintenance, and service vehicles to SAE J845 Class 1 . Recomm...
Glass laboratory needed for ballistic impact testing to meet NATO standards 1, 2, or 3 to MIL SPEC Level 4.
Automotive laboratory needed for SAE testing of a device and components to SAE J575, Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in ...
Laboratory needed for Copper slag testing (Fe0:SiO2, Fe3O4, Cu2S) flotation - grindability, final size requirement for copper floatation with good recovery.
GLP metallurgical laboratory needed for AOAC 2006.03 standard or EPA6010/6020 testing for Aresenic, Cadmium, Cobalt, Molybdenum, Nickel, Lead, Selenium, and Zinc.
Also, nee...
Personal protection equipment (PPE) laboratory needed for ASTM F2992 cut resistance testing of a stainless steel mesh using a TDM-100 machine.
Metallurgical laboratory needed for testing of bolt encapsulation material substance.
Material science laboratory needed for fatigue testing of rebar and couplers according to British Standard.
ASTM metallurgical laboratory needed for testing gold plated coupons made with copper or aluminum bases for Thickness, Purity, Hardness, Appearance, Adhesion, Corrosion resist...
Metallurgical laboratory needed for ISO 9227 testing of metals.
Automotive laboratory needed for UNECE vehicle safety testing automotive anti-lock brakes according to ECE R13H.
Metallurgical laboratory needed for stainless steel and an oxide powder testing using Atomic Emission Spectroscopy ICP AES.
Engineering laboratory needed for testing of automotive sensors according to IPX9K of (24) Automotive Sensors approx. 25mm OD X 45 mm long. A slight variation to the spec is n...
Metallurgical testing laboratory needed for determining recovery of Cu and Au in Cu - Au Skarn Ores and Mineralised Diorites
Oil Laboratory needed for product development testing of diesel and gasoline additive combination with methanol. Previous studies showed the Binding of the emulsion proved elu...
Power company needs Laboratory for engine ash deposits testing taken from GE Jenbacher Gas engines.
Automotive laboratory needed for VW Testing toVTL 956 (VW Test Requirements for reflectors
Large automotive company needs packaging laboratory for ISTA industrial packaging resistance testings labs (norm ISO-13194 or ISTA 2B/3E or local norm for at least stacking co...
ISO or A2LA Automotive Laboratory needed for SAE testing of brake lines. Testing per SAE J1047, Tubing - Motor Vehicle Brake System Hydraulic
Metal Fittings company needs microbiology laboratory for biocidial efficacy testing of product surface testing according to EN ISO 22196 and TS EN 15457 standards. We are a ...
Large steel design company needs materials laboratory for ASTM testing of various coating materials per ASTM standards including:ASTM 673, ASTM A153, ASTM B695, ASTM B571, and...
Auto parts manufacturing company needs quarterly check of metal surface for compliance with ANSI B46.1 Standard in compliance with Rz10 requirement in (3) places on (3) Cold R...
Automotive parts manufacturing company needs testing of a lubricant certification per ASHRAE -97. The lubricant is a solvent based deforming product that must be compatible wi...
On site analysis needed in India of rock deposit for precious and semi precious metals and for gem stone.Black Rock with quartz bands seen in our field, so need to analyze the...
Metallurgical Laboratory needed for XRD on metal samples to solid (cast) form with high ferroalloy content to determine the carbides and alloy phases that
gave my hardfacing...
Automotive laboratory needed for VW Standard testing to measure colour and reflectivity in accordance to VW 50190, Components of the Vehicle Interior Trim
ISO metallurgical laboratory needed for surface roughness testing on Aluminum. Quantity: 10 - 15 pcs, size 120 mm x 95 mm. Material: Aluminum.
Surface finish Rz and Ra.
If your Laboratory or Lab Supplier is interested in quoting or finding out more about the above Laboratory Requests or the many others that we have, call us at 1-855-377-6821, e-mail us or view more Laboratory Requests