For more information on plastics Laboratories or plastics Testing, please call Toll-Free 1-877-353-0451 or email Contract Laboratory.com
CONTRACT LABORATORY . COM
The plastics Laboratory Outsource Network!
plastics Lab Directories
plastics Lab Careers
plastics Lab Events
plastics Lab Resources
plastics Lab Experts
plastics Lab News
Site Map
Become FREE Member Submit plastics Lab Testing Requests Submit plastics Lab Service Requests Submit plastics Lab Product Requests Submit plastics Lab Business Opportunities
ACCOUNTS
LABORATORY TESTING REQUESTS
Lab Directories
Lab Service Requests
Lab Product Requests

Lab Business Opportunities

 

REGISTRATION

Grow your Lab or Lab Supplier
plastics Lab Suppliers, Independent plastics Laboratories for plastics testing, plastics services, plastics research, plastics analysis, plastics assays, plastics scientific, plastics science, plastics R&D, plastics supplies, plastics experiments, plastics development, plastics engineering, plastics investigations, plastics examinations  plastics Laboratory Testing Requests
IMAGE SOURCE:CDC PHIL Technician performing Western Blot testing. Antigens if present will bind and be detected.
View All Laboratory Test Requests
Submit plastics Laboratory Test Requests

Contract Laboratory.com has received the following incoming plastics Laboratory Test Requests which need to be fulfilled ! These plastics Laboratory Test Requests are received from a variety of sources ranging from start-up companies to large, multinational corporations to government agencies actively seeking plastics laboratories to perform their plastics laboratory testing and research. If your plastics Laboratory receives plastics Test Requests that it can not fulfill, please refer them to us! If you have questions, please e-mail us or call 403-770-1992 .
Incoming plastics Laboratory Test Requests
No.
Plastics Testing or plastics Research Description
Approval Date
status
13-00843 India Materials Laboratory needed for ASTM Standard Testing for Physical properties of Flurosilicone and silicone. Properties are Heat aging, low temperature brittleness, Fuel test. ( read more )..... 05/24/2013 Lab Needed
13-00842 India Plastics Laboratory needed for glass testing: fiber orientation of the injected molded component of material N66 composed of 65% polyamdie ,35%Glass fill. ( read more )..... 05/23/2013 Lab Needed
13-00823 Canada or USA Plastics Materials Laboratory needed for Ford / SAE J2302 thermal effectiveness testing. BMW/SAE 2302 thermal effectiveness testing. Need testing on wire harness tapes. ( read more )..... 05/22/2013 Lab Needed
13-00820 India Accredited Environmental Laboratory needed for ISO 14855 for bio-degradation testing to ISO 14855, Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method ( read more )..... 05/21/2013 Lab Needed
13-00686 Plastics Laboratory needed for ASTM Testing of Polyethylene lined material to establish various measures. 1. Physical tests? a. Hardness test (ASTM D 2240), b. Density test (ASTM D 792 or ISO 1183-1), c. Thermal expansion test (with Netzsch dilatometer), d. Erosion resistance test (at different angles and temperature), 2. Gas permeation, diffusion & solubility (PDS) test with CO2 gas at temperatures 60, 75 and 90 C, 3. Hydrocarbon uptake & PDS data with Crude oil & Condensate medium, 4. Blow dow ( read more )..... 04/23/2013 Lab Needed
13-00676 Israel, USA or China plastics laboratory needed for glass fiber testing: Silica Glass Fiber Cord Polyethylene terephthalate fiber Silicone covered Fiberglass tubing Nickel Chrome heating wire Various materials used for labeling Rubber plugs for sealing ( read more )..... 04/23/2013 Lab Needed
13-00665 ISO Accredited Africa Laboratory or Europe Laboratory needed for bio-degradability Testing of bio-degradation of plastic packaging material. ( read more )..... 04/22/2013 Lab Needed
13-00661 India, Karnataka, Bangalore plastics laboratory needed for plastics testing of polythene covers bags. we need to test our biodegradbale plastic polythene bag ( read more )..... 04/20/2013 Lab Needed
13-00640 USA Materials Laboratory needed for ASTM Testing, PTFE creep test to ASTM D2990-09 ( read more )..... 04/17/2013 Lab Needed
13-00596 India Materials Laboratory needed for ASTM Testing: Plastics Testing profile to astm e84-70,astm e84-81A. ( read more )..... 04/01/2013 Lab Needed
13-00576 ISO Analytical Chemistry Laboratory needed for DIN Testing of inmolded part for 1,3 Butadiene per DIN EN13130-4, Materials and articles in contact with foodstuffs - Plastics substances subject to limitation ( read more )..... 03/28/2013 Lab Needed
13-00562 Southern California Plastics Laboratory needed for random third party testing: quality control testing of our production line for: tensile, impact, heat distortion, moisture, etc. for engineering resin ( read more )..... 03/27/2013 Lab Needed
13-00535 Asia Mechanical Laboratory needed for SAE Testing of Fuel pipe for engine, would like to be tested from SAE. ( read more )..... 03/22/2013 Lab Needed
13-00526 Plastics Laboratory needed for plastics testing: Size Exclusion Chromatography Service needed. Quotation on a per sample basis. Phenolic Resins, molecular range 100-10,000. Polystyrene Calibration, plotted chromatograms, calculated molecular weight and number average for resins. ( read more )..... 03/20/2013 Lab Needed
13-00517 Texas certified physical laboratory needed for MIL-STD airline seat testing. The specifications are: MIL-S-23190 50 pounds per AS23190-1 sh 5 (note 6) Would like to know what labs are in the area for various testing including material properties testing for aluminum, steel, and plastics. ( read more )..... 03/19/2013 Lab Needed
13-00508 USA Plastics Laboratory needed for polyester testing : Test Polyester Sewing Thread Test Thread per Fed STd-191 Method 4804&5804. ( read more )..... 03/18/2013 Lab Needed
13-00505 USA Plastics Laboratory needed for Fiber reinforced Plastic coupon testing 1) Glass content, wt percentage. 2) tensile strength, 3) flexural strength, 4) tensile modules, 5) flexural modules 6) peel test & lap shear test for Pvc Frp coupon. ( read more )..... 03/18/2013 Lab Needed
13-00479 India Plastics Laboratory needed for Testing as per IS 12866:1989 for light diffusion of Fibreglass Reinforced Polymer Roofing Sheet ( read more )..... 03/13/2013 Closed
13-00458 Europe or UK plastics laboratory needed for PVC testing in PVC materials for medical device. Determination of: 1.Jellification degree2.K-Value3.Shore A hardness ( read more )..... 03/12/2013 Lab Needed
13-00433 Toronto Plastics Laboratory needed for plastics Testing of sample pieces of HDPE and LLDPE plastics to ASTM E1354 at an incident heat flux of 50KW/M^2 in the horozintal Orientation. ( read more )..... 03/07/2013 Lab Needed
13-00432 Government needs North Carolina laboratory for raw material testing nylon testing. ( read more )..... 03/07/2013 Lab Needed
13-00419 India Toxicology Laboratory needed for toxicity testing of latex from Wrightia tinctoria plant has toxic effect on humans taken in any quantity with curd ( read more )..... 03/06/2013 Lab Needed
13-00384 United Arab Emirates Materials Laboratory needed for ASTM Testing Mechanical, Material and Analytical Analysis of Polyethylene: Cross Linked Closed Cell Polyethylene FOAM; primarily used for Thermal Insulation. We want to perform some tests as per ASTM standards.1. Compression deflection as per ASTM D3575 D 2. Flammability as per ASTM D3575 M 3. Energy absorption as per ASTM D3575 R2 4. Buoyancy as per ASTM D3575 AA 5. Constant compression creep as per ASTM D3575 BB 6. Dynamic cushioning as per ( read more )..... 02/26/2013 Lab Needed
13-00373 India Plastics Laboratory needed for plastics testing: Tensile testing of cotton based fibre rainforcement plastic Breaking load,Strain & Stress at failure,%Elongation,Elastic modulus,Stress Vs Strain Plot,Load Vs Deflection Plot ( read more )..... 02/24/2013 Lab Needed
13-00324 South Africa plastics laboratory needed for lastics testing: Relative Viscosity on plastics Vicat ( read more )..... 02/19/2013 Lab Needed
13-00315 India analytical chemistry laboratory needed for oil testing of highly viscus oil ( read more )..... 02/18/2013 Lab Needed
13-00297 Florida materials laboratory needed for Peel and Shear testing for HDPE or XR-5 liner mateirals. ( read more )..... 02/14/2013 Lab Needed
13-00276 Plastics Laboratory needed for polypropylene testing: % etyhlene in PP and how much is cost per sample. ( read more )..... 02/12/2013 Closed
13-00265 USA Plastics Laboratory needed Melt Flow Index or Melt Volume Ratio of thermoplastic urethane pellets. Looking for impartial testing for discrepancy between manufacturer and customer results. ( read more )..... 02/11/2013 Lab Needed
13-00231 Plastics laboratory needed for ASTM Testing of 7-8 samples of vinyl sheet piling. Tensile strength, IZOD impact, transmissivity and equivalent permeability, heat deflection, and UV stability degradation. ( read more )..... 02/06/2013 Closed
13-00222 Middle East materials laboratory needed for teflon testing of samples of teflon rods and sheets in dubai for the exact composition of the mixture in it. ( read more )..... 02/05/2013 Lab Needed
13-00216 USA Materials laboratory needed for polyethylene foam testing to FMVSS Standards: CMVSS/FMVSS 302 horizontal burn rate testing on Cross-linked Polyethylene Foam. ( read more )..... 02/05/2013 Lab Needed
13-00205 Saudi Arabia Plastics laboratory needed for ASTM Testing: MELT FLOW INDEX OF HDPE & PP 5 SAMPLES ( read more )..... 02/04/2013 Lab Needed
13-00162 Europe plastics labroatory needed for DIN antistatic testing to DIN 53482 to determine the antistatic feature of artificial leather we are going to develop ( read more )..... 01/28/2013 Lab Needed
13-00129 Plastics Laboratory needed for ASTM Plastic Testing of injection plastic components of PBT Valox, particulary. Fusion point, Fuid point, specific weight, hatdness, tensile strenght. ( read more )..... 01/22/2013 Lab Needed
13-00123 Asia UKAS physical laboratory needed for ISO color fastness testing in air vent made out of ABS . as now it get yellow from white in 6 months.need test to meet uka nd eu standerd.need specification to produce and test. " ( read more )..... 01/22/2013 Lab Needed
13-00099 Materials Laboratory needed for Rubber Certification Testing to Density acc. to DIN EN ISO 1183-1Hardness acc. to DIN 53505 Tensile & Elongation acc. to DIN 53504 Permanent deformation acc. to PV 3307Low temperature behaviour acc. to VW 2.8.1 Electric insulation properties acc. to PV 1015Condensation atmosphere with constant humidity acc. to DIN EN ISO 6270-2I . one sample of EPDM rubber certification testing ( read more )..... 01/17/2013 Lab Needed
13-00086 USA materials laboratory needed for polymer testing of R&D polymer sample for screen Anti-microbi ability of polymer solution2. DSC of Melt and Tg transion temperature3.surface tension in 0.1% solution4. foam height by Ross-Miles test. ( read more )..... 01/15/2013 Lab Needed
13-00081 Europe Materials Laboratory needed for ISO Testing or ASTM Testing: mechanical stability for nathural and synthetic latex ( read more )..... 01/14/2013 Lab Needed
13-00039 Materials Laboratory needed for petrol octane buster testing on rubbers. ( read more )..... 01/07/2013 Lab Needed
13-00027 Materials Laboratory needed for rubber testing: Thermal Conductivity of a 13 Ply Rubberised canvas belt at your facility. If yes, please inform the charges for the same with lead time and sample size you required for the same. ( read more )..... 01/04/2013 Lab Needed
12-2363 Asia plastics laboratory needed for plastics testing: Oxygen Transmission Rate (OTR) for plastic film Laminate plastic film ( read more )..... 12/26/2012 Lab Needed
12-2358 Plastics Laboratory needed for ASTM Testing: creep analysis for a plastic material per ASTM D2990, Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics. ( read more )..... 12/21/2012 Lab Needed
12-2331 USA physical laboratory needed for flammability testing to UL 94 Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances testing. 5VA and V-0 at 2.5 mm, V-0 at 1/16" ( read more )..... 12/17/2012 Lab Needed
12-2278 UAE plastics laboratory needed for rubber testing: quality checking of rubber used in conveyor belts for maximum long life . for stone crushing company in uae . We would like to know if you provide services for testing of the quality of material used in conveyors depending on which we will decide whther to purchase the conveyors belts of a particular brand or a dealer . This is important to us as we spend a large amount of money on purchasing conveyors belts whose quailty sometimes seem untrust ( read more )..... 12/10/2012 Lab Needed
12-2274 Asia and India plastics laboratory needed for Delta Y of Purified Terephtaliec Acid 2-3 samples of PTA, Required test named as delta Y . ( read more )..... 12/08/2012 Lab Needed
Fogging test, under DIN 75201. Method B. ( read more )..... Lab Needed
12-2223 Materials laboratory needed for ASTM Degradation Testing plastic anaerobic degradation testing based on ASTM D5210 in south-east Asia region (singapore, thailand, malaysia, ( read more )..... 11/28/2012 Lab Needed
12-2219 India Polymer Laboratory needed for chromatography testing : Liquid polymer composition alalysis Gel permeation chromatography ( read more )..... 11/28/2012 Closed
12-2218 Europe Materials Laboratory needed for plastics testing: Determination of the coefficient of thermal expansion (TMA - ISO 11359; or dilatometry) -40ºC to +80ºC ( read more )..... 11/28/2012 Closed
12-2213 Physical Laboratory needed for ASTM testing foam insulation for tensile strength to ASTM D1623, Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics at cryogenic temperatures (-265 F / -165 C). Can you do such testing? If so, can you provide me a rough budgetary cost to perform this testing in 3 directions on one type of foam insulation? The foam is polyisocyanurate with a density of 2.5 lbs/ft3 (40 kg/m3). The expected tensile strength is around 265 kP ( read more )..... 11/27/2012 Lab Needed
12-2175 Polymer Laboratory needed for polymer testing of polymer membranes for fuel cell research, and are looking for an analytical lab to measure proton conductivity of membranes. The polymers are organic/inorganic materials. ( read more )..... 11/21/2012 Lab Needed
12-2145 Safety Laboratory needed for BS EN Testing to BS EN388 Protection against Mechanical Hazards and BS EN422, Rubber and plastics. Machines. Safety ( read more )..... 11/15/2012 Lab Needed
12-2143 Plastics Laboratory needed for polyester testing. Determination of nitrogen and /or sulfur content in the range of 0.1ppm up to approx. 10ppm Sample is a thermoplastic polyester (solid at RT) ( read more )..... 11/15/2012 Lab Needed
12-2139 Plastics Laboratory needed for polymer testing to determine the molecular weight and polydispersity index of an insoluble polymer (insoluble in commonly used organic and aqueous solutions) ( read more )..... 11/15/2012 Lab Needed
12-2119 Plastics Laboratory needed for ASTM Testing, ISO Testing and DIN Testing of 25 kg capacity Plastic bag which used for packing polypropylene or polyetheylene pellets inside the bag to be tested for its fitness ( read more )..... 11/13/2012 Lab Needed
12-2116 Rubber manufacturer exporting rubber products to Europe needs rubber testing of rubber mat for electrical resistance testing to: EN 13501-1/DIN 4102 B1, BS 921 and ISO 1853. Please inform us the possibility of doing this test in your laboratory and offer us your most favorable quotation for the test. ( read more )..... 11/09/2012 Lab Needed
12-2102 Mechanical Laboratory needed for plastics automotive testing to test painted plastic parts test for VW TL 211 Specification. ( read more )..... 11/07/2012 Lab Needed
12-2101 Plastics laboratory needed for epoxy testing: "LONG TERM FLEXURAL CREEP TEST" for epoxy resin CIPP liner use in pipe rehabilitation. ( read more )..... 10/07/2012 Lab Needed
12-2093 Plastics laboratory needed to test water vapour transmission rate and oxygen transmission rate in some flexible films. I have 16 samples to test it. ( read more )..... 11/06/2012 Lab Needed
12-2086 Plastics Materials Laboratory needed for polyethylene testing of 12" O.D. corrugated polyethylene wastewater drainfield pipe for 15 years and we would like it tested for H-20 wheel loads and for burial to 8 feet deep. ( read more )..... 11/05/2012 Lab Needed
12-2045 America Microbiology Laboratory needed for antibaterial testing of "Anti-bacteria & Anti-Fingerprint Coating Agent" for electronic devices to ISO 22196 Antimicrobial Activity of Plastics "Measurement of Antibacterial Activity on Plastics Surfaces "Anti-bacteria & Anti-Fingerprint Coating Agent" for electronic devices. (we apply to window of smart phone, camera, tablet PC, E-book and so on.) Thickness of Coating is very thin(10~20nm) and characterictics is hydrophobic surface. (Anti-Fingerpr ( read more )..... 10/30/2012 Lab Needed
12-1991 USA Plastics Laboratory needed for plastics testing. Test Acetaldehyde in Bottle grade resin for PET manufacturer. We are looking for a third party to independently test our resin. ( read more )..... 10/23/2012 Lab Needed
12-1978 UAE Materials Laboratory needed for ASTM Testing: Properties of Polyethylene:- Brittleness Temperature - as per ASTM D 746 Dielectric breakdown voltage as per - ASTM D 149 ( read more )..... 10/22/2012 Lab Needed
12-1954 India Packaging Materials Laboratory needed for packaging testing: Optimized temperature and compression pressure or torque for induction heat sealing of wax coated liners with sealant layers of plastics on aluminium foil laminated with pulp or foam backing. ( read more )..... 10/17/2012 Lab Needed
12-1937 India Polymer Laboratory needed for reverse engineering product ( read more )..... 10/15/2012 Lab Needed
12-1924 India polymer laboratory needed for testing plastic materials ( read more )..... 10/11/2012 Lab Needed
12-1890 cold crake temperature test for PVC Compound(Solid) ( read more )..... 10/08/2012 Lab Needed
12-1882 Materials Laboratory needed for polymer testing of 20% talc filled PP. New color is brittle. I want to see if degradation occur and compare the microstructure. I was thinking of Molecular weight and distribution and dynamic rheometry but not sure. could you please suggest the best method for this reason? ( read more )..... 10/05/2012 Lab Needed
12-1865 Materials laboratory needed for ASTM Testing mechanical testing to ASTM D638 Standard Test Method for Tensile Properties of Plastics. biaxial plaanr fatigue of composite materials, mo of samples:12 (almost) ( read more )..... 10/01/2012 Lab Needed
12-1859 India polymer laboratory needed for polymer synthesis required for 6 new novel bio-monomers plus polymer fundamental properties testing and polymer testing their ability to be used in PU, PE and PC's. Fundamental physical properties - mol weight, crosslinking, strength ( read more )..... 09/29/2012 Lab Needed
12-1826 India polymer laboratory needed for polymer testing: WVTR and OTR 1 water vapor transmission rate (for polymer) Standards WVTR test for polymer standards/conditions - 1 - IS: 1060 part-2 , 1960; 90 % RH gradient and 38 degree c. 2 - ASTM F 1249 - 06; 90 % RH gradient . OTR test standards/conditions - ASTM F 1434 ; 65% RH 27 degree c. ASTM F 1927-07 ; 65% RH 27 degree c. ( read more )..... 09/21/2012 Lab Needed
12-1797 USA Food Laboratory needed for ANSI 51 Testing. NSF/ANSF 51 (National Sanitation Foundation - Food Equipment Materials ( read more )..... 09/18/2012 Lab Needed
12-1782 USA Physical Laboratory needed for ASTM Testing to ASTM-D-2183 Test Method for Flow Properties of Adhesives.ASTM-D-2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index).20700071043 Chemical Agent Test for HD, Mustard Gas or GB, Nerve Agent. (attached)ASTM-D-1171 Test Method for Rubber Deterioration-Surface Ozone Cracking Outdoors or Chamber. (Triangular Specimens).UL94HBHorizontal Burn Test.ASTM-D-3677 Standard Test ( read more )..... 09/14/2012 Lab Needed
12-1719 Chennai Plastics Laboratory needed for PVC Testing: UV light exposure weathering testing for a PVC material ( read more )..... 08/31/2012 Lab Needed
12-1711 India Plastics Laboratory needed for plastics testing. 3 Samples Need to be tested ( read more )..... 08/30/2012 Lab Needed
12-1709 Asia Materials Laboratory needed for ASTM Testing to ASTM 6954 - Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation comprises three Tiers of testing; oxidation, biodegradation and ecotoxicity. Tier 1- The determination of molecular weight (MW) of HDPE containing ReverteT exposed to a combination of UV and elevated temperature demonstrates that ReverteT for High Density Polyethylene significantly accelerates the rate o ( read more )..... 08/30/2012 Lab Needed
12-1683 India POLYMER LABORATORY NEEDED FOR BIS TESTING FOR BIS APPROVED POLYCARBONATE SHEET TESTING ( read more )..... 08/25/2012 Lab Needed
12-1667 Product Safety Laboratory needed for OECD Testing, OECD Marine biodegradability testing to Organisation for Economic Co-operation and Development OECD 306, Biodegradability in Seawater ( read more )..... 08/23/2012 Lab Needed
12-1649 Ireland Materials Science Laboratory needed for IEEE testing : Polymer Testing, Differential Scanning Calorimetry, or similar. To test for changes in Crystalininty in an amorphous polymer due to forced degradation studies ( read more )..... 08/20/2012 Lab Needed
12-1609 Physical Laboratory needed for ASTM Testing to ASTM C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics. Tensile testing of 95 pieces of welded cpvp and pvc. ( read more )..... 08/13/2012 Lab Needed
12-1579 Middle East Materials Laboratory needed for ASTM polymer testing: self ignition temperature test of polyresin material (acrylic material) according to ASTM-D1929, Standard Test Method for Determining Ignition Temperature of Plastics address: Dubai, UAE ( read more )..... 08/07/2012 Closed
12-1532 Plastics Laboratory needed for PVC compound testing to determine the Flammability temperature ( or Temperature Index) follow to BS ISO 4589-3 Plastics-Determination of burning behaviour by oxygen index ( read more )..... 07/30/2012 Lab Needed
12-1528 USA Plastics Laboratory needed for MALS Polymer Testing for measuring Intrinsic Viscosity and Molecular Weight of various polymers of hyaluronic acid formulations. Preferabley using MALS or other suitable/validated methodology. ( read more )..... 07/30/2012 Lab Needed
12-1440 Material Laboratory needed for ASTM Testing to ASTM F1927ASTM F1249ASTM D1434Oxygen Permeability Test Water Vapour Transmission Rate Test Carbon Dioxide Permeability ( read more )..... 07/17/2012 Closed
12-1426 USA Analytical chemistry laboratory needed for polymer testing.Need Vapor Pressure tested on two liquid polymers. Need vapor pressure curves including 50F and 350F. ( read more )..... 07/16/2012 Lab Needed
12-1417 Asia Materials Laboratory needed for ASTM Testing: Flammability testing to ASTM E 1354 of natural composite reinforced polymer testing ( read more )..... 07/13/2012 Lab Needed
12-1416 Canada and USA Analytical Chemistry Laboraory needed for plastics/ rubber testing to ISO 13741-2:1998 (Plastics/rubber - Polymer dispersions and rubber latices (natural and synthetic) - Determination of residual monomers and other organic components by capillary-column gas chromatography).we need 2 samples to be tested according to the procedure ISO 13741-2:1998. The samples are styrene/divinylbenzene copolymers and we need to now the level of styrene emissions accordind to that procedure. ( read more )..... 07/12/2012 Lab Needed
12-1389 India Plastics Laboratory needed for plastics testing of plastic sheets address: Karachi Pakistan ( read more )..... 07/10/2012 Lab Needed
12-1382 Materials Laboratory needed for materials testing: Vicat Softening and Melting Point testing and would like to know price and turnaround time address: ( read more )..... 07/09/2012 Lab Needed
12-1376 India Plastics Laboratory needed for polymer testing: mechanical properties of polymer film (thin) % elongation and tensile testing of oplymer films, five samples of films. Please send the film size and thickness information. ( read more )..... 07/09/2012 Lab Needed
12-1372 Plastics Laboratory needed for DIN Testing or ASTM Testing for properties of polyisocynate NCO Content, Non-volatile content Viscosity at 23°C Iodine color value Free TDI monomer, Equivalent weight Flash point approx. 5°C Density at 20°C ( read more )..... 07/09/2012 Lab Needed
12-1335 US Analytical Chemistry Contract Synthesis laboratory needed for organic chemistry synthesis: Esterification of a long chain alcohol (C7 to C10) to acrylic acid. Need 1 kilogram." ( read more )..... 06/29/2012 Closed
12-1305 India Materials Laboratory needed for ASTM Testing of Plastics Film, Base Wt gm/m2 Width mm Avg. Tensile Strenth (CN/25mm) Avg. Elongation at Break (%25mm) WVTR(g/m2*24h) Water Resistance (mbar) Other MD CD MD CD ( read more )..... 06/25/2012 Lab Needed
12-1302 Packaging Certification Laboratory needed for Materials Certification Testing of PVC End caps white in clour and its been UV Stabilized we need certificate for that as our client in us ( read more )..... 06/23/2012 Lab Needed
12-1299 Plastics Laboratory needed for Polymer Testing, ASTM Testing to ASTM D6068, Standard Test Method for Determining J-R Curves of Plastic Materials ( read more )..... 06/23/2012 Lab Needed
12-1298 Packaging Laboratory needed for packaging testing: UN FIBC Flexible Intermediate Bulk Container bags. ( read more )..... 06/23/2012 Lab Needed
12-1272 Plastics Laboratory needed for analytical chemistry testing for chemical residue left by the laundry facility after washing ( read more )..... 06/23/2012 Lab Needed
12-1263 Materials Laboratory needed or SAE Testing for SAE AIR4170 and MIL-DTL-83054 testing ( read more )..... 06/19/2012 Lab Needed
12-1241 USA A2LA Laboratory needed for GC analytical chemsitry testing of two polyurethane-nylon fabric laminates materials tested using GC to measure the following substances: 1) Methylenediphenyl diisocyanate (MDI) down to 1 ppb 2) Bisphenol A down to 1 ppm 3) Nonylphenol down to 1 ppm. The product may be used to transport beverages (milk) and the customer wants to ensure that these SOCs are not present in the polyurethane film. ( read more )..... 06/14/2012 Lab Needed
12-1222 Materials Laboratory needed for ASTM Testing: Saybolt color analysis by ASTM 6045 method of our Polyethylene wax sample. If it is possible at your end then please let me know the analytical charges and how much sample is required for the same. ( read more )..... 06/12/2012 Lab Needed
12-1199 Acoustics and Plastics Laboratory needed for JIS testing to the standards methods below of a bonded plastic sheet with a tissue layer with 2mm of total thickness. * JIS K 6850 - Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies * JIS K 6854-3 - Adhesives - Determination of peel strength of bonded assemblies - Part 3: Adhesives -180? peel test for flexible-to-flexible bonded assemblies (T-peel test) * JIS A 1416 - Acoustics - Method for laboratory measur ( read more )..... 06/08/2012 Lab Needed
12-1192 Plastics Laboratory needed for rubber testing: lab test compressive stress relaxation of rubber. There are two test conditions. One is in 150'C air for 1008 hours, the other one is in 150'C SF 105 fluid for 1008 hours. ( read more )..... 06/06/2012 Lab Needed
12-1178 West Coast USA Plastics Analytical Chemistry Laboratory needed for Flakes Contamination Testing for: PVC, PETG, Polyamide. Need to know if testing can be done on recyled bottle flakes for contamination Identification purposes. Contaminants in question are PETG, polyamide, polycarbonate, labels and polystyrene. Reason for identifying this contaminant is to determine if they contribute to higher Benzene ppm on the final product. ( read more )..... 06/05/2012 Lab Needed
12-1136 Europe Materials Laboratory needed for ASTM testing as per ASTM D5511 : ASTM D5511 - 11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions ( read more )..... 05/26/2012 Lab Needed
12-1111 Analytical Chemistry Laboratory needed for plastics testing: comparison testing of PvC Files: DSCDSC tests on two PVC samples ( read more )..... 05/22/2012 Lab Needed
12-1105 Europe Toxicology Laboratory needed for Acute toxicology studies for Daphnia similis and chronic toxicology testing for Ceriodaphnis dubia in wastewater. ( read more )..... 05/21/2012 Lab Needed
12-1078 Plastics Laboratory needed for ASTM Testing, Melt index testing ( read more )..... 05/16/2012 Closed
12-1029 FDA GMP Optical Laboratory needed for plastics testing to determine ABBE number on a sample, sample is a thin circular plastic material. ( read more )..... 05/08/2012 Closed
12-0995 Europe FDA product safety laboratory needed for USDA Acceptance Testing: (United States Department of Agriculture) Reference: 21 CFR 177.1550 ( read more )..... 05/02/2012 Lab Needed
12-0969 Materials Laboratory needed for Optical Measurement Testing. Reflectivity value of plastic material solid surface, in visible spectrum ( read more )..... 04/27/2012 Closed
12-0955 Plastic curtains and screens manufacturer that needs Optical Laboratory for AWS testing to AWS standard F2.3 determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm. We need 2 to 5 samples tested." ( read more )..... 04/25/2012 Lab Needed
12-0952 USA plastics laboratory needed for ASTM Testing to identify a plastic pellet on an extruder screen. ( read more )..... 04/25/2012 Closed
12-0908 Hong Kong or China materials laboratory needed for Plastics Testing: ASTM Testing to test ASTM D6954-04 in accordance with ASTM D6954-04 Tier 1 thru 3. ( read more )..... 04/18/2012 Closed
12-0866 USA Plastics laboratory needed for materials testing to EN 1598 to test 13 oz PVC material to EN1598 for blockout out properties for use as welding curtain material. ( read more )..... 04/12/2012 Closed
12-0863 Plastics Laboratory needed for ISO or ASTM Testing: polyethylene testing for Oligomer Content in Polyethylene Terephthalate (PET) chips using either HPLC, MAE or Soxhlet extraction technique. ( read more )..... 04/12/2012 Lab Needed
12-0840 Electrical Laboratory needed for DIN Testing: Dielectric strength testing, Dielectric dissipation factor (tanä) testing , Volume resistivity testing, Surface resistivity testing, Dielectric constant testing ( read more )..... 04/09/2012 Lab Needed
12-0739 Middle East Polymer Laboratory needed for polymer testing: GPC-IR analysis on LLDPE (ethylene 1-hexene copolymers) samples to have the following results: (1) Average molecular weight, (ii) Molecular weight distribution, and (iii) Side chain branching (SCB) distribution as a function of molecular weight. We appreciate if you could let us know the analysis cost per one(1), sample, cost per five(5) samples, and cost per ten(10) samples. ( read more )..... 03/24/2012 Lab Needed
12-0737 Europe, Japan, Korea, India Plastics Laboratory for PET Testing: Determination of P, S,Ag in PET polyester chips powder with XRf by Lucas-Tooth calibration method. ( read more )..... 03/24/2012 Lab Needed
12-0722 Asia Plastics and Polymer Laboratory needed for ASTM Testing to ASTM D6954. ( read more )..... 03/23/2012 Lab Needed
12-0720 USA Plastics Materials Laboratory needed for plastics testing: Contact angle on a curved surface Oxygen Transmission 4 samples +/-2 ( read more )..... 03/22/2012 Closed
12-0718 Plastics Physical laboratory needed for DIN Testing of PVC membrane to DIN 53370,DIN53455,DIN53454,DIN53363,DIN16726,DIN53495,DIN50014 ( read more )..... 03/22/2012 Closed
12-0716 Plastics Laboratory needed for PVC film testing: IMDG 5.3.1.1.1.2 test on rigid pvc film ( read more )..... 03/22/2012 Lab Needed
12-0706 Plastics and Polymer Analytical Chemistry Laboratory needed for plastering compound testing. 1.Total Calcium content 2.Total Magnesium content 3.Loss on Ignition 4.Percentage silica 5.Polymer extraction and identification 6.Test results and its interpretation. If you could do this test please send me chargers etc.The sample i could be sent you soon. ( read more )..... 03/21/2012 Lab Needed
12-0704 Las Vegas Polymer Laboratory needed for quality control testing of resin pellets contents. quality control under 10 samples ( read more )..... 03/21/2012 Lab Needed
12-0682 Nevada Polymer Laboratory needed for resin testing on resin pellets to determine the content. we would like to use a company in Las Vegas or nearby. ( read more )..... 03/19/2012 Lab Needed
12-0664 US Plastics Laboratory needed for ASTM Testing: physical properties of a plastic resin tensile, elgongation, yield, flex modulus, melt index, impact - izod preferred charpy okay, hardness (shore A) SAMPLES NEED TO BE MOLDED ( read more )..... 03/16/2012 Closed
12-0656 Polymer Laboratory needed for polymers testing: Softening point & brookfiled viscosity at 120 deg C of polymer ( read more )..... 03/16/2012 Lab Needed
12-0617 India Polymer Laboratory needed for PET Testing, intrinsic viscocity of pet lab testing ( read more )..... 03/10/2012 Lab Needed
12-0616 India Materials Laboratory needed for ASTM Polymer Testing, FTIR & TGA, of polymer for development ( read more )..... 03/10/2012 Lab Needed
12-0605 Plastics Laboratory needed for ASTM Testing, biodegradation testing to ASTM 5338 for 10 samples of polypropylene containing an additive which should facilitate their biodegradation. ( read more )..... 03/09/2012 Lab Needed
12-0594 Plastics Laboratory needed for Quality COntrol Testing, acrylic testing of acrylic used for the see-through tank wall of a new shark tank to be installed within a new world class aquarium under construction in the Salt Lake City area. The manufacturer is a Chinese firm providing their own quality control testing data. We would like to obtain indpendent testing results of some key material parameters to verify. We can provide samples of their acrylic. The parameters to be tested are: KEY PAR ( read more )..... 03/08/2012 Closed
12-0587 Plastics Laboratory needed for ash testing on polyurethane foam. ( read more )..... 03/08/2012 Closed
12-0585 USA EPA ENVIRONMENTAL TOXICOLOGY LABORATORY NEEDED FOR TOXILOGY RISK ASSESSMENT OF POLYVINYL ACETATE EMULSION ( read more )..... 03/08/2012 Lab Needed
12-0546 East Coast USA Analytical Chemistry Laboratory needed for Polyethylene testing: Dilute Solution Viscosity (0.02% at 135C) of UHMW-PE for determination of Intrinsic Viscosity. Number of Samples TBD. ( read more )..... 03/02/2012 Closed
12-0538 West Coast USA or Pacific Northwest Polymer Laboratory needed for ASTM Testing to ASTM D4603. Viscometry for PET plastic 3 samples per week. Plastic PET preforms for intrinsic viscosity testing. Rapid turnaround is critical. ( read more )..... 03/02/2012 Lab Needed
12-0507 Government needs India Materials Laboratory for materials testing of materials used for fiberglass boats, which are currently being used. ( read more )..... 02/27/2012 Closed
12-0500 Europe Mechanical Laboratory needed for GMW Air induction duct durability testing to GMW15143 ( read more )..... 02/27/2012 Lab Needed
12-0482 USA or Canada Physical Laboratory needed for water repellancy testing for WATER REPELLENT TREATMENTS Compliance to Standards listed in testing requirements below. There will be three samples of products provided. ( read more )..... 02/24/2012 Lab Needed
12-0469 Malaysia Physical Polymer Laboratory needed for Durability Testing for Durability Dropping Impact - Dropping Impact Mass : 25kg -Input Load,F1 : 6kN ( Adjust the dropping height to achieve F1 ) -Room temperature : 20+/- 10degree C -Qty samples : 2 pcs -To measure spring characteristics and amount of permanent set in fatigue before,after test and target cycles ( read more )..... 02/22/2012 Closed
12-0459 West Coast USA Mechanical Laboratory needed for Mechanical Strain Testing planar biaxial strain testing of thin film polymer specimens submerged in a saline solution. We are looking for the in-plane strain found through non-contact optical methods and the associated forces. There are about five different thin film membranes, each to be tested an appropriate sample-significant number of times. ( read more )..... 02/22/2012 Lab Needed
12-0443 USA Polymer Laboratory needed for polypropylene contaminant testing for percentage of polypropylene contaminant within a base HDPE material. 4 samples ( read more )..... 02/20/2012 CLOSED
12-0423 Polymer Laboratory needed for polymer testing: thermal conductivity of polymer matrix composites and polymers? If so, 1. What kind of tests do you perform (guarded hotplate, flash diffusivity, etc)? 1. What is the price per specimen 2. What is the turn-around time? 3. What are specimen dimensions? ( read more )..... 02/17/2012 Closed
12-0419 Food Laboratory needed for Food Packaging Testing, Migration Testing for Food Contact Surfaces (polymers, adhesives, metals, lubricants, colorants, plastics, papers) ( read more )..... 02/17/2012 Lab Needed
12-0417 Polymer Laboratory needed for ASTM Residual Testing: ASTM F 2013-10, Polymer residual testing in process samples and fabricated items.ASTM F 2013-10, Residual Acetaldehyde in PET by Static HS-GC-FID. We are seeking a back-up lab to handle sample overflow. ( read more )..... 02/17/2012 Lab Needed
12-0398 Polymer Laboratory needed for Plasticiser content testing in sample PA 11 tube of size 12x9 product in 12x 9 size. Due to crack issue we intend to check the plasticizer in the raw material granules.This is further extruded in the tube form extrusion process.Material and Tube validation data of the above grade as per DIN73378 & DIN74324 Can you help us to check plasticizer content.Pl send us quotation of time/cost and sample required to do so, Due to crack issue we intend to check the plastici ( read more )..... 02/15/2012 Lab Needed
12-0388 Europe Polymer Laboratory needed for hydrosoluble polymer testing. 5-10 samples Determination of Mn, Mw, Mp by SEC-UV-RI-MALS or A4F-UV-RI-MALS. ( read more )..... 02/14/2012 Lab Needed
12-0360 Canada or US Physical Laboratory needed for OECD Testing, Resin Testing to OECD 117 testing for one sample ( read more )..... 02/10/2012 Closed
12-0354 USA Physical Laboratory needed for polymer testing at low temperature. stress-strain testing of polymers at -150C to establish stress-strain curve at low temperature -150C ( read more )..... 02/09/2012 Lab Needed
12-0349 India ISO Physical Laboratory needed for ISO acceptance testing of 1.1 kv 2.5sqmm pvc insulated 2rbice connection cablec Al se Acceptance Test ( read more )..... 02/09/2012 Lab Needed
12-0321 US Plastics Laboratory needed for rubber equivalency testing to show equivalency to component already used in product. We need to have rubber tested using this method and compare both lots. We will have 10 samples of each. ( read more )..... 02/06/2012 Lab Needed
12-0276 Asia, India or Europe Physical Materials Laboratory needed for ASTM Testing or ISO Testing: Thermal Testing Coefficient of Linear Thermal Expansion for Plastics ( read more )..... 02/01/2012 Lab Needed
12-0274 Plastics Laboratory needed for APET Sheet testing ( read more )..... 02/01/2012 Lab Needed
12-0267 India, Asia Materials Laboratory needed for ASTM Testing: 1) Heat Transmission coefficient 2) Rigidity - ASTM C393 3) Elongation - ASTM D638 4) Deflection Temperature under load - ASTM D648 5) Coefficient of Linear Thermal expansion : ASTM D696 6) Impact resistance - ASTM D732 7) Toxicity : should be within acceptable, TCLP 8) Colour change at 80degC : No visible change 9) Delamination at 80deg C : No delamination 10) Bending strength : ASTM D747 11) Sound Reduction : 27Db ( read more )..... 01/31/2012 Lab Needed
12-0237 ELECTRICAL LABORATORY NEEDED FOR IEC TESTING OF ELECTRICAL TAPES TO IEC93 AND 250JOINTS IEC 60502-4 AND IEC 1442 FOR PERMITIVITY, DISSIPATION FACTOR, SURFACE AND VOLUME REISTIVITY. ELECTRICAL JOINT COMPLIANCE TESTING. ( read more )..... 01/26/2012 Lab Needed
12-0234 USA Materials Laboratory needed for ASTM Testing adn FDA Testing of bioplastic materials : 1.Bio-content analysis - ASTM D6866 2.Food Packaging Contact Safety - FDA 178 3.Biodegradability - ASTM 6400 ASTM 4.As well as another biodegradability test for our durable bioplastic. This hould be some kind of controlled biodegration test that lasts between 4 to 6 months. Bioplastics used for food contact, apparel, interior automotive, toys, pet products, consumer products d6866 dfa 178 astm- 6400 ( read more )..... 01/25/2012 Lab Needed
12-0216 INDIA PLASTICS LABORATORY NEEDED FOR MATERIALS TESTING OF PLASTIC COMPONENT TO VERIFY WHICH IS MATERIAL AS WELL AS MATERIAL DEFINATION AS PER INDIA MARKET. REGARDS KOTEKAR ( read more )..... 01/24/2012 Lab Needed
12-0215 USA Plastics and Polymers Laboratory needed for Hydrolytic Stability Testing of Polurethane ( read more )..... 01/24/2012 Closed
12-0199 India Plastics Laboratory needed for plastics testing of 2,2(1,2-ethenediyidi-4,1-phenylene bisbenzoxazole% for CaCO3% testing ,Al2O3% testing,Bulk density testing ,fineness testing ( read more )..... 01/23/2012 Lab Needed
12-0186 Plastics Laboratory needed for Mylar film testing for ultra-violet and visible light transmission using a spectrophotometer, or similar device. ( read more )..... 01/20/2012 Closed
12-0176 Asia, Middle East, India Materials Laboratory needed for Plastic Jerrycan testing for UN number approval ( read more )..... 01/18/2012 Lab Needed
12-0096 India Materials Laboratory needed for ASTM Testing to determine the chemical and physical properieties of PTFE ( read more )..... 01/12/2012 Lab Needed
12-0094 Texas Materials Laboratory needed for ASTM Testing for coefficient of friction ( read more )..... 01/12/2012 Lab Needed
12-0085 Plastics and Polymers Laboratory needed for ASTM Testing to measure melt flow rate for epoxy according to ASTM 1238-10 or ISO1133. ( read more )..... 01/10/2012 Lab Needed
12-0074 USA Mechanical laboratory needed for AASHTO Testing joint to AASHTO M326-08 specification for HDPE liner pipe ( read more )..... 01/09/2012 Lab Needed
12-0067 Middle east Mechanical Laboratory needed for ASTM Testing to ASTM D3039, Tensile test & modulus of GRP laminates testing ( read more )..... 01/09/2012 Lab Needed
12-0035 Materials Laboratory needed for ASTM Testing Oxo-Biodegradable plastics testing to ASTM D 6954-04 ( read more )..... 01/05/2012 Lab Needed
12-0014 Southern USA materials laboratory needed for high temperature GPC testing of polymer molecular weight and molecular weight distribution by GPC. There are 3 samples need to be tested. Please give us a quote on potential cost for the tests. Please note that the polymer has high molecular weight (Mn=60KDa). ( read more )..... 01/03/2012 Lab Needed
12-0009 India Plastics and Polymers Weathering Laboratory needed for Weathering testing for Plastic films (Humidity: 10% to 90 %) followed by tear strength. ( read more )..... 01/02/2012 Lab Needed
11-2754 Saudi Arabia plastics laboratory needed for plastics identification testing to identify the materials included and the percentage ( read more )..... 12/21/2011 Lab Needed
11-2726 Plastics Laboratory needed for analytical chemistry testing of polyethylene flame retardent concentrate (pellets) that have a make up of decabromomodiphenyl oxide & antimony trioxide and need to know the % of each ( read more )..... 12/16/2011 Closed
11-2700 Polymer Laboratory needed for polymer testing of PET Chips imported from China (FOB Tianjin or Shanghai) 400MT per month of PET (CR-8828 - carbonated drinks) to Brazil. Please let me know how you can help us to verify this final product before the shipment! ( read more )..... 12/13/2011 Closed
11-2601 Large Automotive Manufacturer needs India plastics laboratory for ASTM Testing ASTM D 955, % Shrinkage test for Plastics In this test, plastics molding is done in a mold cavity (dimensions of cavity are precisely measured) & after 24 hours, the dimensions of plastics molded test samples are measured. The difference between dimension of cavity to test specimen gives shrinkage & if it is divided by cavity dimension, it gives result in % shrinkage. % shrinkage = (L0-L1)/L0 where L0 is length of ca ( read more )..... 12/02/2011 Lab Needed
11-2594 Large Medical Device Manufacturer needed plastics laboratory to verify a plastic materials part surface finish against a MoldTech Standard MT-11010 or an SPI standard SPI-B3 ( read more )..... 12/02/2011 Lab Needed
11-2564 Large Multinational Corporation needs Canada Materials Laboratory for ASTM Flexural Modulus testing to ASTM D790 as -40°C 1 sample 5 specimens ( read more )..... 11/29/2011 Closed
11-2562 India Polymer Laboratory needed for rubber testing for rubber compound percentage test ( read more )..... 11/29/2011 Lab Needed
11-2556 Europe Materials Laboratory needed for ASTM Testing: thermal conductivity measurement services to ASTM C-1461 or ASTM E1530 for fiber reinforced (glass or carbon fiber) polymer composite materials. (Number of samples: various number of samples will be measured through year 2012) ( read more )..... 11/29/2011 Lab Needed
11-2526 Analytical Laboratory neeed for cass test for our components . ( read more )..... 11/28/2011 Lab Needed
11-2519 UK Plastics Laboratory needed for PET Bottle grade Flakes testing- IV,color value, Moisture content, other plastics, PVC etc" ( read more )..... 11/25/2011 Lab Needed
11-2517 Asia Plastics Laboratory needed for JASO, JIS Testing, Poly Vinyl Choloride (PVC) Testing Auto Vinyl wires testing Laboratory. ( read more )..... 11/25/2011 Closed
11-02481 USA Plastics and Polmers Laboratory needed for RoHS and REACH Certification Testing of pipette tips (Polypropylene) to certify that they compply with RoHS and REACH directives. ( read more )..... 11/18/2011 Lab Needed
11-02469 Plastics and Polymers Laboratory needed for plastic testing of plastic part to 21CFR177.2410 ( read more )..... 11/18/2011 Lab Needed
11-02456 Israel Physical Laboratory needed for ASTM Testing: Burst Strength and peel strength test of plastic lidding film to tray to ASTM F1140 ASTM F2824-10 ASTM F2054 ( read more )..... 11/16/2011 Lab Needed
11-02367 India materials laboratory needed for Polyurethane testing of tubes Parameters / Evaluation 1.Hydraulic pressure test @ 50 deg c for 1 hr (Pressure to be applied 10 bar then examine for bulging, elongation, and change in colour). 2.Bursting Pressure ( Pressure to be applied till it burst). No of samples: 2 ( read more )..... 11/07/2011 Closed
11-02344 India Materials laboratory needed for ASTM Testing for Comparative Tracking Index [CTI] for polyester film to ASTM D-3638-93 ( read more )..... 11/04/2011 Closed
11-02322 Materials laboratory needed for thermal polyrethane testing for termical linear expansion in polyurethane resin, using standard DIN 53752. ( read more )..... 11/02/2011 Lab Needed
11-02309 Materials laboratory needed for 21CFR177.1500 and 1520 Testing. Need test pricing and turn-around time. ( read more )..... 10/31/2011 Closed
11-02286 California analytical chemistry laboratory neeeded for deformulation testing for ingredients, percentage ratio, best service at best price ( read more )..... 10/27/2011 Lab Needed
11-02236 Canada Plastics Laboratory needed for ASTM, BS, CS, BS, AS, DIN LDPE Testing for Mechanical properties of LDPE lay flat tube;  Tube stretch limit Tensile and tear strength in both direction (N/50mm, N), operating pressure (m of water) Sample; one piece of 120cm tube ( read more )..... 10/21/2011 Closed
11-02205 Mechanical Laboratory needed for Instron Strength testing to Identify the compression resistance range for six EVA foam products. ( read more )..... 10/18/2011 Lab Needed
11-02202 Plastics Laboratory needed for ISO Testing on multiaxial Impact on plastic materials to ISO 6603-2; 5samples ( read more )..... 10/18/2011 Closed
11-02182 Food Packaging Laboratory needed for Packaging Testing of Plastic Bags, which was uses in Packaging of Foods, Edible Oil, and Vegetable Ghee etc. in Pakistan. Test Plastics bags and Food Material, (which we will send upon your request) and give us Test Analysis Report from your Lab on following: 1. Testing of Plastics Bags (sample) either Food Grade or Non Food Grade. (Use for packaging of Edible Oil and vegetable ghee etc.,) 2. Testing of Plastics Bags (Sample) is harmful or has some side effec ( read more )..... 10/15/2011 Lab Needed
11-02167 Analytical Chemistry Plastics Laboratory needed for deformulation testing of Injection-Molded Part - What Polymer is it made of? Does it Contain any additives - UV or Slip Agents?, Any inorganic additives like talc or foam, etc. ? ( read more )..... 10/13/2011 Closed
11-02163 USA materials laboratory needed for ongoing residual testing to Quantitate RESIDUAL D3-D20 Cyclics to the ppm level in Silicone samples on an ongoing basis ( read more )..... 10/13/2011 Lab Needed
11-02159 Large Chemical Company needs Texas physical laboratory for ASTM Testing and ISO Testing of polypropylene PP pellets specimens: Izod Impact, 23C Notched with Procedure A, ASTM D4101 Izod impact, Notched @ 23degC ASTM D256 Izod impact, Notched @ 23degC ISO 180 Izod impact, Notched @ -40degC ISO 180 Charpy Impact, Notched @ 23degC ISO 179 Flex Modulus, 2mm/min, 64 mm span ISO 178 Flexural Modulus at 23 C ASTM D4101 Flexural Modulus, Tangent, 1.33 mm/min, Method 1 A ( read more )..... 10/13/2011 Lab Needed
11-02136 New Jersey Plastics Laboratory needed for ASTM Testing: ASTM D1238Melt Index Test of LDPE 8 samples to be tested ( read more )..... 10/11/2011 Closed
11-02077 Petrochemical Company needs Middle East microbiology laboratory to determine silver amount in TiO/Ag nanopawder as antibacterial additive to PET( polyethylene terephthalate) polyester materials and then determine silver amount in PET final product. The amount of silver may be around 0.5 to 4 wt% in nanopowder and around 10 to 40 ppm in final Pet polyester. samples by XRF, please inform us to discuss about cost and so on. ( read more )..... 10/05/2011 Lab Needed
11-02068 Polymer Laboratory needed for GPC analysis of co-polymer of MMA and mpeg-maa(molecular range is 5000-150000) ( read more )..... 10/04/2011 Closed
11-02060 Bangalore materials laboratory needed for Ozone resistance testing for rubber ( read more )..... 10/04/2011 Closed
11-02040 Analytical Chemistry Laboratory needed forchemical testing on Nylon? how much would it cost for two 20x20x23mm cubes? ( read more )..... 09/30/2011 Lab Needed
11-02015 USA Polymer Laboratory needed for ASTM Testing ASTM D1159-98 Electrometric titration of 10 samples for bromine number. These are polymers in a solution of cyclohexane. The bromine number is quite low - 2 to 0.12. Can you differentiate between 0.24 and 0.12 bromine numbers? ( read more )..... 09/27/2011 Closed
11-02002 Canada laboratory needed for similarity test on two pieces of rubber to see if they are the same material ( read more )..... 09/26/2011 Closed
11-01995 Sri Lanka Certification Laboratory needed for Cat III certification testing ( read more )..... 09/26/2011 Closed
11-01968 Materials laboratory needed to measure gas diffusion coefficient in polymer melt High temperature (120 deg C) ( read more )..... 09/21/2011 Lab Needed
11-01943 Plastics Laboratory need for polymer testing of Rubber to determine polymer percentage, oil and wax percentage, Moisture percentage, Carbon percentage and other fillers percentage content in it? kindly send us your quotation. ( read more )..... 09/19/2011 Lab Needed
11-01898 Physical Laboratory needed for ASTM analysis: linear thermal expansion coefficient test according to ASTM E831 on rubber sample? The test condition is -30°C to 30°C. We will provide the vulcanized rubber samples. ( read more )..... 09/15/2011 Closed
11-01870 Toxicology Laboratory needed for toxicity testing on new chemicals to prepare MSDS. Please let me know how to get the quote or send the sample for the test ( read more )..... 09/12/2011 Lab Needed
11-01862 Saudi Arabia Plastics Laboratory needed for chemical composition testing of Globes (around 10 Pcs) that we need to know thier chemical composition i.e. plastics materials content in them. ( read more )..... 09/11/2011 Closed
11-01811 Middle East Materials Laboratory needed for analysis for Cation and Anion resins. Kindly send the details of required quantity and other details with duration 1. Total exchange capacity meq/ml 2. Salt splitting capacity meq/ml 3.Water regain g/g 4.Contamination 5.Appearance 6.Bead Integrity % (i) Whole perfect % (ii) Whole cracked % (iii) Broken % 7.Density gm/ml ( read more )..... 09/07/2011 Lab Needed
11-01798 India Microbiology laboratory needed for decomposable poly bags testing ( read more )..... 09/05/2011 Lab Needed
11-01766 Physical Plastics Laboratory needed for IEC Testing: IEC 60695-11-10 Horizontal burn test Testing of PP using the horizontal burn test ( read more )..... 08/31/2011 Closed
11-01761 Plastics and Polymer Laboratory needed for PEG 1450 testing for Ethylene Glycol and Diethylene Glycol (NMT 0.25%), which is not an NF requirement for PEG's with molecular weights > 1000. ( read more )..... 08/31/2011 Closed
11-01738 Plastics Laboratory needed for polymer(plastic) testing of HDPE pellets for density, melt index is of the sample we will send. Also if the sample has any PP in it. ( read more )..... 08/29/2011 Lab Needed
11-01689 Materials Laboratory needed for measuring the refractive index of a film. The film is solid and is composed of a polymeric material. The refractive index determined will be use in future measurements by a customer who wants to know thickness of a film with identical composition ( read more )..... 08/24/2011 Closed
11-01668 Physical Plastics Laboratory needed for moisture analysis on plastic components in addition to root cuase for torque strip out. ( read more )..... 08/19/2011 Closed
11-01651 California plastics physical laboratory needed for wear resistance to cpsd-sl-79217-mthd ( read more )..... 08/17/2011 Closed
11-01644 Plastics Laboratory needed for ISTA Testing: ISTA-3B tests ( read more )..... 08/16/2011 Closed
11-01599 Plastics Laboratory needed for analysis to determine the percentage of mix in a sample of a plastic bag? We need to know the mix between HDPE and LLDPE. ( read more )..... 08/10/2011 Lab Needed
11-01577 Europe mechancial and materials laboratory needed for ASTM TEsting RTV silicone testing to ASTM 412a and ASTM 624c: 1. tensile test (ASTM412a), 30 samples 2. tear strength test (ASTM624c), 30 samples 3. scanning electromicrossope (SEM), 5 samples 4. accelarated whether aging, 90 samples 5. coloring capability 30 samples 6. peel Bond Strength, 30 samples 7. Water absorption 8. Filter diffusion test 9. patch test for allergic reaction ( read more )..... 08/09/2011 Lab Needed
11-01561 ISO Ireland Materials Laboratory needed for ASTM Testing for Thermal conductivity testing on flexible polyurethane foam ( read more )..... 08/04/2011 Closed
11-01518 India plastics laboratory needed for ASTM testing of 16 mm polycarbonate sheets ( read more )..... 07/30/2011 Closed
11-01496 India Acoustics, Plastics Laboratory needed for Sound Transmission Loss Testing for Polymer ( read more )..... 07/27/2011 Lab Needed
11-01493 Canada Packaging Laboratory needed for COF, ink adhesion and corona tests. We are flexible packaging film producer. ( read more )..... 07/27/2011 Lab Needed
11-01418 Europe plastics laboratory needed for REACH Compliance Testing for Determination, quantification and identification of monomer or any other substance in a polymer/copolymer. ( read more )..... 07/19/2011 Lab Needed
11-01380 USA Electrical Laboratory needed for UL Testing. the electrical testing we need are: - Long term insulation resistance in water, as described in UL 44, par. 5.4 issued July 2005 Immersion in water up to 90°C - Capacitance and relative permittivity, as described in UL 1582, par. 1020 issued October 2001. Immersion in water up to 90°C ( read more )..... 07/12/2011 Lab Needed
11-01374 India plastics laboratory needed for vapour proofing( permeability) property testing of Non wovwn Polymer cloth in India. ( read more )..... 07/11/2011 Closed
11-01366 Canada or USA TSCA GLP Environmental Toxicology Laboratory needed for EPA OPPTS Testing: EPA OPPTS 850.1075 (Fish), OPPTS 850.1010 (Daphnia), OPPTS 850.5400 (Algae Tier I and Tier II) Biodegradation OECD 209 (Activated Sludge Testing) ( read more )..... 07/11/2011 Closed
11-01311 Plastics and Polymer Laboratory needed for Nissan Engineering Standard MO135 Weatherability and light resistance test methods for synthetic resin parts. We want to test the zippers we manufacture ( read more )..... 06/28/2011 Closed
11-01287 Materials Laboratory needed to Measure the contact angle of water with varying concentrations of surfactant on several plastics/polymers ( read more )..... 06/24/2011 Closed
11-01279 Physical Laboratory needed for ISO 8256 Tensile impact strength testing of notched specimens at +23ºC ( read more )..... 06/23/2011 Closed
11-01242 FDA GMP Packaging Laboratory needed for plastic packaging materials testing ( read more )..... 06/18/2011 Lab Needed
11-01230 Canada or USA Polymer Laboratory needed for testing 5 films to be measured for oxygen transmission rate (OTR) with Mocon, water vapor transmission rate with Ca test, and coefficient of thermal expansion in the temperature range of -10 to 140 C. The value should be around 5-40 ppm/K. ( read more )..... 06/16/2011 Closed
11-01226 UK Plastics Laboratory needed for durability testing of thermoplastic TPE-U and TPE-V polymer materials against the chemical and microbial degradation. And to see which if any cause the the degradation of the material. ( read more )..... 06/16/2011 Lab Needed
11-01225 ISO Mumbai Plastics Laboratory needed for ASTM Testing, Basic material ingredient testing, Physical & Chemical tests for Nylon Grade plastic material. ( read more )..... 06/16/2011 Closed
11-01200 Physical Laboratory needed for Scratch & Abrasion Resistance testing ( read more )..... 06/10/2011 Lab Needed
11-01198 Materials laboratory needed for reverse engineering to deformulate a PU film to know all each components and how was it treated. We will have 2 samples ( read more )..... 06/10/2011 Closed
11-01197 India NABL Electrical Laboratory needed for IEC Testing of Silicon Rubber insulators 120KN & 160KN in NABL Approved Laboratory ( read more )..... 06/10/2011 Closed
11-01180 NY Plastics Laboratory needed for ASTM Testing for tensile and elongation testing of gloves ( read more )..... 06/08/2011 Lab Needed
11-01162 Eastern USA Materials Laboratory needed for ASTM Testing: ASTM G 155, ASTM B 117,ASTM D 1037, RCRA-CDO NOT KNOW SPECIFICS AT THIS TIME ( read more )..... 06/07/2011 Closed
11-01148 Coating and Paint Mfg needs materials certification laboratory for test certifications for our thermal insulation coatings, which we are manufacturing. ( read more )..... 06/06/2011 Lab Needed
11-01112 USA Plastics and Polymers Laboratory needed for Mossbauer Spectroscopy analysis of Fe in recycled automobile tires materials." ( read more )..... 05/30/2011 Lab Needed
11-01107 UK plastics laboratory needed for extractables testing on polyurethane non woven film materials. two samples,both to be tested for extractables using FT-IR, after 24 hours shaking in water, 24 hours shaking in ethanol and 72 hours in ethanol. ( read more )..... 05/30/2011 Closed
11-01106 Middle East Physical Laboratory needed for Recycled PET Flake Physical Test Suite: Flake size (mm) Moisture content (%) Moisture Variation (%/hr) Intrinsic Viscosity (dl/g) Bulk Density (kg/m3) Melt Temperature (degree C) PVC content (ppm) Glue content (ppm) Aluminium content (ppm) Paper content (ppm) HDPE content (ppm) PP content (ppm) Total Polymer foreign particles content (ppm) Coloured PET flake content (ppm) PET dest content (%) pH of flake ( read more )..... 05/30/2011 Closed
11-01077 Large Mfg needs USA materials, plastics laboratory for Compounding of plasticized PVC formulations ( read more )..... 05/25/2011 CLOSED
11-01038 Plastics and Polymers Laboratory needed for physical testing of polyester bands of width 5 to 10 cm and resistance in traction from 50 to 100 kN according to the width. These bands will be used as reinforcement of ground for the realization of the retaining walls. It is the European standard 94-270 which treats this type of realization. In term of safety coefficient partial of creep, the standard failing this leaves the choice between a coefficient of 0.33 (for polyester), rather pessimistic and ( read more )..... 05/18/2011 Closed
11-01009 Materials Laboratory needed to for plastic testing component on monthly basis. ( read more )..... 05/13/2011 Closed
11-01000 USA Microbiology Laboratory needed for anti-viral efficacy testing by direct innoculation of plastic substrate with Rhinovirus to determine the anti-viral efficacy over 0-12 hours. ( read more )..... 04/12/2011 Lab Needed
11-00992 Northeast USA ISO 9001 analytical chemistry laboratory needed for ASTM Water Testing: Total organic carbon analysis of organic residue in water to ASTM D4839 ( read more )..... 05/12/2011 Lab Needed
11-00984 Physical Laboratory needed for glass haziness testing on material as per TSM 0503G. ( read more )..... 05/11/2011 Closed
11-00980 Australia Physical Laboratory needed for Specific Heat and thermal conductivity testing of HDPE over temperature range of 0C to 250C ( read more )..... 05/11/2011 Closed
11-00953 INDIA MATERIALS LABORATORY NEEDED FOR AAS TESTING FOR IDENTIFICATION OF PLASTIC MATERIALS ( read more )..... 05/07/2011 Closed
11-00940 Malaysia Physical Laboratory needed for testing gas permeability of clear polymers. Samples approx 1mm to 3mm thick. ( read more )..... 05/05/2011 Closed
11-00925 Analytical Chemistry Laboratory needed for testing a plastic sample made of LDPE to see what other additives are present (when heated it at 365F° the sample bonds to an aluminum plate). ( read more )..... 05/04/2011 Lab Needed
11-00882 Materials Laboratory needed for uv transmission testing of PVC film ( read more )..... 04/29/2011 Closed
11-00874 Hong Kong ANSI Materials Laboratory needed for plastic sink wear test as per ANSI Z124.3-1995 clause 5.3 ( read more )..... 04/29/2011 Closed
11-00867 USA ASTM Analytical Chemistry Laboratory needed for Plastic Film Density Test(OPP)as per ASTM D1505-10. ( read more )..... 04/28/2011 Closed
11-00834 USA DSC Materials Laboratory needed for Polymer Materials Testing. ( read more )..... 04/25/2011 Closed
11-00819 IS Electrical Laboratory needed for testing Electrical Insulation Material as per IS-15652, results testing on our product and confirmed ( read more )..... 04/22/2011 Closed
11-00795 Florida/Ohio Materials Laboratory needed for verification and optimization of components for a UV cured polymer with organic crystals. ( read more )..... 04/19/2011 Lab Needed
11-00765 Optical Laboratory needed for performing glass haziness testing. ( read more )..... 04/13/2011 Closed
11-00749 Canada packaging laboratory needed for lightfastness test for water based inks printed on tyvek material ( read more )..... 04/11/2011 Closed
11-00730 India Analytical Chemistry Laboratory needed for acrylic polymer testing for co-monomer identification and quntitative analysis of a given polymer powder sample. 2. molecular weight analysis of a given polymer powder sample. ( read more )..... 04/07/2011 Closed
11-00727 Middle East Materials Laboratory needed for plastics testing green house film (Agricultural film). ( read more )..... 04/07/2011 Closed
11-00717 India Analytical Chemistry Laboratory needed for Acrylic Polymer testing: 1. Co-monomer identification and 2. Molecular weight analysis ( read more )..... 04/07/2011 Lab Needed
11-00716 Scotland, UK ASTM Physical Laboratory needed for Brittleness Temperature Testing of PP Foam Tester Kit as per ASTM D 746-07 in order to determine the temperature at which the material fails under specific impact conditions. ( read more )..... 04/07/2011 Closed
11-00708 USA ASTM Materials Laboratory needed for testing as per ASTM d-1003 ( read more )..... 04/07/2011 Lab Needed
11-00697 FDA GMP Food Laboratory needed for foood contact surface testing ussing surrogate testing procedures in FDA's Recycled Plastics-Chemistry Considerations guidance, to document validate the efficacy of the companies recycling process to sufficiently decontaminate Polyethyle based resins (HDPE, LDPE primarily. We would propose to use four surrogates representing the universe of volatile-non polar (Toluene); volatile-polar (diethyl ketone; volative-non polar (phenyldecane); and non volatile-polar ( ( read more )..... 04/05/2011 Closed
11-00682 Plastics Laboratory needed for ASTM and ISO materials testing elastomer mixing, tensile tests, rheometrics, rubber process analysis, research and development ( read more )..... 04/05/2011 Closed
11-00681 Polymer Laboratory needed for polymer reformulation of polymer solution involving butyl rubber in suspension. Have the basic "recipe" from a deformulation process. Need expert guidance in formulating and manufacturing." ( read more )..... 04/05/2011 Closed
11-00672 WA/West Coast USA FDA GMP Consumer Products Safety Laboratory needed for FDA testing plastic mugs to meet FDA requirements. The mugs made of polypropylene and acrlonitrile styrene. ( read more )..... 04/01/2011 Closed
11-00640 ASTM ISO DIN Analytical Chemistry Laboratory needed for deformulation of coextruded Film -layer by layer (totally three layers) ( read more )..... 03/29/2011 Lab Needed
11-00618 Mumbai India ASTM Packaging Laboratory needed for testing: 1. Density ASTM D7922 2. Ash content 3. MFI (230deg /2.I 6kg) ASTM D1238 4. Moisture KARL-FISHER 5. Izod impact ASTM D256A 6. Tensile Strength ASTM D638 7. Flexural Modulus ASTM D790 8. Vicat Softening Point ASTM D648 9. HDT@4.5Kg/cmI\2 ASTM D648 10. Elongation @ break @ 23deg C 11. ESCR - ASTM D1693 12 Spectro ( read more )..... 03/25/2011 Closed
11-00554 Europe EP Analytical Chemistry Laboratory needed for testing hexane extractables in polyethylene according to EP European Pharmacopoeia. ( read more )..... 03/17/2011 Lab Needed
11-00512 USA Physical Laboratory needed for abrasion testing on several nylon parts. ( read more )..... 03/10/2011 Closed
11-00483 INDIA, BARODA, GUJARAT ASTM/ISO Analytical Chemistry Laboratory needed for material identity testing on 3 samples, sample is unknown to us, it is plastic / rubber sample-We need the perfect information of the material composition, so that we can duplicate the material. ( read more )..... 03/08/2011 Closed
11-00480 Analytical Chemistry Laboratory needed for molecular weight testing: nylon 6/6 molecular weight and molecular weight distribution test. ( read more )..... 03/07/2011 Closed
11-00454 Europe - Greece Physical Laboratory needed for testing to determine viscosity vs. shear rate for a wood plastic composite formulation. This will require capillary and torque rheometry. Also want determination of storage modulus and loss modulus by parallel plate rheometry. ( read more )..... 03/03/2011 Closed
11-00426 MATERIALS LABORATORY NEEDED FOR NYLON PLASTIC RAW MATERIAL TESTING ( read more )..... 02/28/2011 Closed
11-00406 Polymer Materials Laboratory needed for Gel Permeability Chromatography, Molecular Weight testing of polypropylene composites need to check the molecular weight, it is not soluble in the THF nor toluene since it contained PP. Understood that Polypropylene is soluble in hot xylene.Maybe can suggest other method to test for the molecular weight - like parallel plate rheometer for relative molecular weight. ( read more )..... 02/24/2011 Closed
11-00367 ASTM Electrical Laboratory needed to measure the following electrical properties in HDPE: 1. Dielectric constant and dissipation factor (@ 1 Hz), according to ASTM D 1531 2. DC Volume Resistivity (@ 23°C), according to ASTM D 257 3. Dielectric Strength in 125 mils (3.175 mm) short time (S/T), according to ASTM D 149 ( read more )..... 02/21/2011 Closed
11-00353 Materials Laboratory needed for MSDS plastics testing to establish MSDS Sheet for liquid rubber composite derived from our companies patented process. ( read more )..... 02/18/2011 Closed
11-00348 India Materials Laboratory needed for plastic additives testing ( read more )..... 02/17/2011 Closed
11-00334 Asia Plastics and Polymers Laboratory needed for compatibility testing for CPVC sch 80 materials compatibility to 98% H2SO4. ( read more )..... 02/15/2011 Closed
11-00320 Ohio Materials Laboratory needed for ANSI Testing: ANSI 26.1 test groups 4, 5, & 12 under "rigid plastics" for glazed materials used in the automotive industry. Samples are simple platic hardcoated plaques. ( read more )..... 02/14/2011 Closed
11-00312 India ISO Materials Laboratory needed for polymer testing poly house sheets for green house - 1) U.V.stabilized film should block U.V. Radiations below 380 nanometer of PAR light. Poly film should have good thermic effect more than 60%. Films should have properties like anti-drip, anti- fog, anti-dust, light diffusion capacity above 50% etc. The minimum thickness of the poly film will be 200micron. The poly film should have ISO certification and conform to ISI specifications. required..U.V. ( read more )..... 02/14/2011 Closed
11-00305 Europe Analytical Food Laboratory needed to do OML & SML tests for CPP-Cast Polypropylene-films that meet European directive 2002/72/EC ( read more )..... 02/11/2011 Closed
11-00296 BRAZIL MECHANICAL LABORATORY NEEDED FOR TESTING "ELASTOSYL R401/40 CONTROL 33932HO" FOR TENSILE STRENGTH. ( read more )..... 02/10/2011 Closed
11-00289 USA materials laboratory needed for IEC testing of a solvent based epoxy/poymamide, IEC 60664 Type 1 twp part solvent based epoxy/polyamide conformal coating of mine who wishes it or their assembly tested to this spec. ( read more )..... 02/10/2011 Closed
11-00255 Physical/Mechanical Laboratory needed for physical testing Vicat softening temperature testing, Melt flow rate testing and tensile properties of thermoplastics pipes. ( read more )..... 02/03/2011 Closed
11-00244 Europe ANSI/ESD Materials Laboratory needed for ANSI/ESD testing of polyurethane foam for the following parameters: Volume resistivity ANSI/ESD S20.20 / ANSI/ESD S541 Surface resistivity ANSI/ESD S20.20 / ANSI/ESD S541 Static decay rate ANSI/ESD S20.20 / ANSI/ESD S541 ( read more )..... 02/03/2011 Closed
11-00228 NJ, PA Mechanical Laboratory needed for Impact Testing of modified Poly Methyl Methacrylate (PMMA) samples. ( read more )..... 02/01/2011 Closed
11-00217 Materials Laboratory needed for four separate ISO/DIN testing of plastic fold and form lining system (Am-Liner II). They are Type Testing (TT), Batch Release Testing (BRT), Process Verification Testing (PVT) and Audit Testing (AT)as follows: Chemical resistance tests determined by: ISO 175:1999 Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals (PH range 1 to 10) . ISO 178:2001 for sample dimension and preparation. The following test standards shall ( read more )..... 01/31/2011 Closed
11-00211 Northeast US ISO, FDA GLP Mechanical Laboratory needed for ASTM Testing, mechanical testing of UHMWPE Fibers, incl.density, tensile strength, tensile modulus and elongation at break. ( read more )..... 01/31/2011 Closed
11-00182 Electrical Laboratory needed for ANSI Testing polyurethane flexible foam to ANSI ESD S20.20 standard. ( read more )..... 01/26/2011 Closed
11-00180 ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR IDENTITY TESTING PLASTIC BAG FOR CONTENT. ( read more )..... 01/26/2011 Closed
11-00125 Brazil or China ISO 17025 or A2LA Physical Laboratory needed for thermal gravimetric testing of rubberone hour at 105C followed by two hours at 200C in Nitrogen report weight loss after each hour of testing ( read more )..... 01/20/2011 Closed
11-00088 UK Analytical Chemistry Laboratory needed for testing for traces of animal product for High Density Polyethylene for type of HDPE. ( read more )..... 01/14/2011 Closed
11-00040 Analytical Chemistry Laboratory needed for Out-Gas Testing of Solid Polyethylene Foam at Room Temp, 15% Above, 25% Above using GC-MS. ( read more )..... 01/06/2011 Closed
11-00030 Canada (<40km from Burnaby) Rheological Laboratory needed for ODR Rheometer testing on Liquid Silicone Rubber to produce results and graph torque vs. time as the rubber cures to a full state of cure. Test must be done in an enclosed area of fixed dimensions so that the sample is tested under pressure. ( read more )..... 01/05/2011 Closed
11-00018 Manufacturer of plastic curtains and screens that are used as safety welding screens in industrial environments needs Optical Laboratory to perform testing to determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm. We need 2 to 5 samples tested. ( read more )..... 01/04/2011 Closed
11-00006 China Optical Laboratory needed for Light Transmittance, Haze, Yellowness Index, and Ultra-Violet Light Absorption Testing on Greenhouse HDPE Tarps. ( read more )..... 01/03/2011 Closed
11-00002 CHINA ANALYTICAL CHEMISTRY LABORATORY NEEDED FOR: COATING THICKNESS TEST NICKEL FREE TEST RAW MATERIALS LEAD AND TOXIC ELEMENT TEST ( read more )..... 01/01/2011 Closed
11-00001 CHINA MATERIALS LABORATORY NEEDED FOR TESTING HDPE TARP FOR: LIGHT TRANSMISSION TEST UV STABILITY TEST ( read more )..... 01/01/2011 Closed
10-03065 WEST COAST USA PHYSICAL LABORATORY NEEDED FOR HARDNESS DESCRIPTION TESTING OF DELRIN PLASTIC PART IN ROCKWELL M SCALE ( read more )..... 12/20/2010 Closed
10-03031 Chicago, Illinois Physical Laboratory needed to test moisture content of 20 mil PMMA film in the range of 0.19% to 0.50% moisture content. ( read more )..... 12/15/2010 Closed
10-03014 India Physical Laboratory needed for plastics testing plastic LD for MFI.Density. ( read more )..... 12/13/2010 Closed
10-02973 USA Analytical Chemistry Laboratory needed for testing as per TRGS 552 for N-Nitrosodimethylamine, N-nitrosodiethylamine, N-nitrosomorpholine, N-nitrosopiperidine, N-nitrosomethylphenylamine, N-nitrosoethylephenylamine, N-nitrosodiethanolamin, N-nitrosodiisopropylamin, Nitrosodipropylamin, N-nitrosomethylethylamin and N-nitrosopyrrolodin. ( read more )..... 12/07/2010 Closed
10-02970 Analytical Chemistry Laboratory needed for Elution Testing on Polyethylene and Polypropylene ( read more )..... 12/07/2010 Closed
10-02969 Saudi Arabia ISO Analytical Chemistry Laboratory nee ASTM Testing: anti oxidents content in thermoplastic pipe used to convey hot and cold water. Number of samples-3 ( read more )..... 12/07/2010 Closed
10-02967 West Coast USA Physical Laboratory needed for polymer testing, melt flow analysis of a polymer. ( read more )..... 12/06/2010 Closed
10-02958 medicion de la biodegradabilidad en bolsas de polietileno reciclado ( read more )..... 12/05/2010 Lab Needed
10-02950 Large Chemical Manufacturer needs Analytical Chemistry Laboratory for GPC Molecular Weight testing of a MAH-grafted-polyethylene. ( read more )..... 12/03/2010 Closed
10-02911 Analytical Chemistry Laboratory needed for testing on Polyurethane Sealants ( read more )..... 11/30/2010 Lab Needed
10-02894 USA Physical Laboratory needed for testing as per Nace 0185 ( read more )..... 11/29/2010 Closed
10-02875 China ASTM Materials Laboratory needed for High Temp Nylon and HDT test as per ASTM D 648 - Equipment must be capable to heated up to 320 deg c+ ( read more )..... 11/25/2010 Closed
10-02874 USA/EUROPE FDA Materials Laboratory needed to conduct testing on PET polymer bottles as follows: 1)Crystallinity 2)Intrinsic viscosity 3)Moisture content 4) UV barrier 5)Acetaldehyde ( read more )..... 11/25/2010 Closed
10-02818 California Packaging Laboratory needed for seal testing to validate the seal of the metalized plastic foil bag. seal time of one second and cooling time of 3 seconds but I am not sure if receipe is making the seal to protect the vacuum insulation panel. ( read more )..... 11/17/2010 Closed
10-02785 South East Asia/Japan ASTM Materials Laboratory needed for testing Plastic Material in accordance to ASTM D1308. ( read more )..... 11/15/2010 Closed
10-02778 Sensory Laboratory needed for nylon odor testing. ( read more )..... 11/12/2010 Closed
10-02759 Canada or Eastern USA FDA Analytical Chemistry Laboratory needed to test 1 sample of a plastic lid for BPA ( read more )..... 11/11/2010 Closed
10-02723 FDA Laboratory needed for testing in accordance to FDA REGULATION 21 CFR 177.1630 ( read more )..... 11/08/2010 Closed
10-02691 Ontario, Canada Mechanical Laboratory needed to conduct dynamic mechanical testing on a rubbery polymer to determine the glass transition temperature. The DMTA must be cooled with liquid nitrogen in order to reach the low temperatures required (Tg = 150 K) ( read more )..... 11/03/2010 Closed
10-02679 ASTM Mechanical Laboratory needed for testing carriage weight as per ASTM D2582-09 ( read more )..... 11/02/2010 Closed
10-02676 Physical Laboratory needed for off-gassing testing when heated to 300-400º F on Ten mil polystyrene sheet. ( read more )..... 11/02/2010 Closed
10-02668 ASTM Analytical Chemistry Laboratory needed to perform isocyanate titration as per ASTM D5155. ( read more )..... 11/01/2010 Closed
10-02660 USA GLP Environmental Laboratory need for biodegradation testing of 2-3 polymers by ISO 14855 or ASTM D6400. ( read more )..... 11/01/2010 Closed
10-02652 India ASTM/DIN Materials/Mechanical Laboratory needed for plastic material identification testing, filler contents, Density, tensile strength, Elongation, Melt Index, ShoreD hardness, ash content, recycled material content, flexural compressive strength. ( read more )..... 10/31/2010 Closed
10-02636 Microbiology Laboratory needed for bio-burden testing. ( read more )..... 10/28/2010 Closed
10-02605 ISO Materials Laboratory needed for testing plastic parts on pilot ladders as per ISO 877:1994. ( read more )..... 10/26/2010 Closed
10-02594 ASTM Environmental Laboratory needed to test Polystyrene cutlery with pro-degradant additive. Tests required are ASTM D5511 and ASTM D5526. ( read more )..... 10/25/2010 Lab Needed
10-02574 Analytical Chemistry Laboratory needed for performing Phthalates test for PVC on 3 samples. ( read more )..... 10/22/2010 Closed
10-02572 Physical Laboratory needed to perform thermal cycle test for plastic component having outer diameter 178 mm. D.Thermal Cycle [80 deg C for 4 hours, -40 deg C for 1 hour, 100cycles]. ( read more )..... 10/22/2010 Closed
10-02561 Materials Laboratory needed for PS materials testing to be done as follows: Bosch Norm N38A SQ1.2: -salt -spray test, norm N42AP 102, clasif #1 -cold test, norm N42AP 214 clasif #13 -splashing water test, norm N42AP 030 clasif. 24/1 - immersion in 5 701 040 000 , 20hrs, 20°C, clasif 40. ( read more )..... 10/21/2010 Closed
10-02553 Mumbai India Physical Laboratory needed for odor testing for Nylon(as per MS300-34-Min 3 grade) ( read more )..... 10/21/2010 Closed
10-02522 Europe Materials Laboratory needed for testing polymer samples for antioxidant measurement. Unfortunately we don't not know which antioxidant were used and need therefore to find a lab that has good experience with antioxidant measurement (and a good GC-MS library, and calibrated equipment for a wide range of antioxidants. ( read more )..... 10/18/2010 Closed
10-02519 Large Pharma needs US Analytical Chemistry Laboratory for deformulating a polymer used in semisolid product. ( read more )..... 10/17/2010 Closed
10-02484 UAE ISO/ASTM Environmental Laboratory needed for testing plastics for biodegradability as per ISO standards. ( read more )..... 10/13/2010 Closed
10-02470 Physical Laboratory needed to measure density of powder polymers. Please advise cost and how many grams of the sample is needed. ( read more )..... 10/11/2010 Closed
10-02352 OECD/ASTM Environmental Laboratory needed for plastic biodegradability testing as per OECD 311 (ASTM E2170), second most common is ASTM D5511 and EPA metals and soil analysis tests. The tests commonly done on biodegradation-test residues (e.g. ASTM D6400) are metals content (EPA heavy metals list) and a plant toxicity test (modified OECD 208). ( read more )..... 09/27/2010 Closed
10-02293 ASTM Microbiology Laboratory needed for testing as per ASTM G 21 - fungal resistance test method. ( read more )..... 09/21/2010 Closed
10-02246 ASTM Packaging Laboratory needed to perform Soot Accumulation test as per ASTM D2741 on 24 polypropolene lids and 16 polypropolene cups. ( read more )..... 09/15/2010 Closed
10-02237 Asia FDA Laboratory needed for testing PVC/PVdC according to the method of US FDA: CFR 175.300. ( read more )..... 09/14/2010 Closed
10-02224 Materials Laboratory needed for DIN/EN/BS Physical Testing, plastics testing: 1) no emission of noxious fumes or leachates as a result of fire to DIN VDE 0482-267. 2) Light transmittance to EN 1794-2 Annex F or DIN 5036. 3) Specular Gloss Values for non-glaring panel to BS 2782 Part 5 Method 520A or ISO 2813. ( read more )..... 09/13/2010 Lab Needed
10-02215 India FDA GMP Laboratory needed for ASTM Testing, Biodegradability Testing Plastic Biodegradable Additive to ASTM 5511D 2. ( read more )..... 09/13/2010 Closed
10-02180 Analytical Chemistry Laboratory needed for inductively coupled plasma(ICP) mass spectroscopy testing, and X-ray fluorescence testing on plastic samples. ( read more )..... 09/08/2010 Closed
10-02177 Environmental Laboratory needed to perform bio-degradability and plastic shelf-life testing ( read more )..... 09/08/2010 Closed
10-02159 Asia/Australia Analytical Chemistry Laboratory needed for molecular weight testing using polymerGel Permeation Chromatography ( read more )..... 09/06/2010 Closed
10-02154 Mechanical Laboratory needed for thermal shock testing of spas, fast turnaround time on 4 samples ( read more )..... 09/05/2010 Closed
10-02146 India Analytical Chemistry Laboratory needed to test Oligomers in Polystyrene ( read more )..... 09/03/2010 Closed
10-02145 India ASTM Physical Laboratory needed to test Brittleness temperature of plastics by impact as per ASTM D 746 ( read more )..... 09/03/2010 Closed
10-02125 ISO/IEC Laboratory needed for testing of plastic electronic identification cards, e.g., ATM cards, Credit Cards, etc in accordance to IEC 7810. The critical parameter to be tested is the Peel Strength of the Magnetic Band. ( read more )..... 09/01/2010 Closed
10-02089 INDIA ASTM MATERIALS LABORATORY NEEDED TO TEST AS PER ASTM E84/FIRE SPRAY TEST ( read more )..... 08/29/2010 Closed
10-01995 Canada/USA ASTM Environmental Laboratory needed to test biodegradable plastic bags for their degrading ability. Bags are used for portable toilets to contain human waste. ( read more )..... 08/18/2010 Closed
10-01977 India/USA ASHRAE Laboratory needed to test Diffuser for Air throw, Noise level, Air Output etc. as per ASHRAE standards ( read more )..... 08/17/2010 Closed
10-01969 India Physical Laboratory needed to test 19 mm thick Polyethylene foam for thermal conductivity in accordance to ASTM C518 or IS 3346. ( read more )..... 08/16/2010 Closed
10-01965 Physical Laboratory needed to perform proficiency test on PolyVinyl Chloride ( read more )..... 08/15/2010 Lab Needed
10-01911 India Physical Laboratory needed for IS thermal conductivity testing for expanded polystyrene sample ( read more )..... 08/09/2010 Closed
10-01853 Hong Kong Analytical Chemistry Laboratory needed for GPC molecular weight analysis of silicone polymers ( read more )..... 08/02/2010 Closed
10-01845 Materials Laboratory needed for analysis of Flame Retardant Poly Sheeting product in accordance to NFPA 701 (Test Method 2) ( read more )..... 07/30/2010 Closed
10-01838 INDIA ASTM MATERIALS LABORATORY NEEDED FOR THERMAL CONDUCTIVITY TESTING OF XPS FOAM IN ACCORDANCE TO ASTM. ( read more )..... 07/30/2010 Closed
10-01835 Europe Physical Laboratory needed to do thermal analysis by DSC on three kinds of thermoplastic materials-are interested in the decomposition temperatures of the three materials. ( read more )..... 07/30/2010 Closed
10-01822 Asia Packaging Laboratory needed for: 1)Poly Carbonate Compatability Test 2)Charge Generation 3) Static Decay, 4) Surface Resistance ( read more )..... 07/29/2010 Closed
10-01744 UAE Physical Laboratory needed for Oxidation induction time testing of HDPE pipes ( read more )..... 07/20/2010 Closed
10-01732 India Materials Laboratory needed for brittleness temperature test at minus-70 degree centigrade on HDPE granules in accordance to astm 746. ( read more )..... 07/19/2010 Closed
10-01665 Analytical Chemistry Laboratory needed to analyze 5 or 6 samples of PVC powder feedstock. We are plastic extruders of rigid PVC fence profiles and are interested in finding out the qualitative and, if possible, the quantitative amounts of materials that make up the compound. There are about 8 different ingredients in the formulation, both organic and inorganic. ( read more )..... 07/11/2010 Closed
10-01660 Materials Laboratory needed for ABS plastic testing. ( read more )..... 07/09/2010 Closed
10-01589 India Analytical Chemistry/Mechanical/Physical Laboratories needed for characterization of polymer of starch derivatives using: 1.DSC Differential scanning calorimetric 2.TGA Thermogravimetric analysis 3.TMA Thermomechanical analysis 4.DMTA Dynamic Mechanical thermal analysis 5.OIT Oxidative induction time 6.MFI Melt flow index,Melt flow rate (MFR) Melt indes (MI),Flow rate ratio (FRR) 7.NMR 8.FTIR 9.Morphology study 9.1 TEM Transmission electron microscopy 9.2 SE ( read more )..... 07/05/2010 Closed
10-01569 USA Analytical Chemistry Laboratory needed for analysis using GPC columns for two SEBS (styrene-ethylene-butylene-styrene)block copolymers of average 400,000 MW to find the Mw/Mn calibrated against PS standard. The copolymer is soluble in THF or toluene. ( read more )..... 07/01/2010 Closed
10-01545 Microbiology Laboratory needed for testing plastic caps used for drinking bottles. Need the caps tested for Standard Plate Count, Coliforms, Yeast & Mold. ( read more )..... 06/28/2010 Closed
10-01530 USA Analytical Chemistry Laboratory needed for EPA testing using GLP aqueous GPC : 1. need analytical method to detect polymer (AMW 5000) in water with varying levels of CaCO3 2. need pre&post treatment samples analyzed ( read more )..... 06/24/2010 Closed
10-01516 Houston, TX Toxicology Laboratory needed for testing PVC, polystyrene, polycarbonates. ( read more )..... 06/23/2010 Closed
10-01450 USA Physical Laboratory needed for TMA testing using penetration probe to study thermal characteristics over temp range RT to 150C on polymer film materials, ten samples. ( read more )..... 06/17/2010 Closed
10-01429 New Zealand Polymers Testing Laboratory needed for testing. ( read more )..... 06/15/2010 Closed
10-01394 Physical Laboratory needed for water vapor transmission of paint and plastic film, thermal conductivity and shrinkage of glass reinforced plastics testing. ( read more )..... 06/09/2010 Closed
10-01380 USA GMP Analytical Chemistry Laboratory needed for MALDI testing on Polymer sample. ( read more )..... 06/07/2010 Closed
10-01371 IMDG Laboratory needed for IMDG testing on plastic container in accordance to IMDG. ( read more )..... 06/04/2010 Closed
10-01353 USA Analytical Chemistry Laboratory needed for analysis of Calcium Carbonate Concentrate for use in plastics extrusion. Would like to know percentage of Calcium Carbonate, Particle size of the Calcium Carbonate, any coatings or other additives found in the concentrate. ( read more )..... 06/03/2010 Closed
10-01339 Pakistan Analytical Chemistry Laboratory needed to analyze chemistry of insoluble organic polymers. ( read more )..... 06/01/2010 Closed
10-01338 Environmental Laboratory needed to perform biodegradation testing on a plastic sample to fulfill requirement listed in European Directive 94/62 EC. ( read more )..... 06/01/2010 Closed
10-01335 Physical Laboratory needed to do pressure filter value testing for color master batches based on polymers like PP, PE, LLDPE etc. ( read more )..... 06/01/2010 Closed
10-01319 Materials Laboratory needed for ASTM Polyurethane waterproofing membrane testing in accordance to ASTM. ( read more )..... 05/28/2010 Closed
10-01317 Mumbai- India Bioanalytical Laboratory required to test plastic disposable 100 ml medical containers 50,000 units every month ( read more )..... 05/28/2010 Closed
10-01276 Bioanalytical Laboratory required for testing and certification of presterilized plastic bags with EVA film used to store cell culture media (an aquious solution). Need testing for extractables. Please let us know if you do the testing and can you certify. Please let us know the cost involved. ( read more )..... 05/25/2010 Closed
10-01234 Physical Laboratory required for testing plastic film for DSC, Seal curves, Hot tack, Composition analysis, FTIR, Clarity, Haze, Tensile,COF ( read more )..... 05/19/2010 Closed
10-01232 ASTM Laboratory required for testing packaging plastic bag according to ASTM D6954 to see if it is considered oxo-degradable. ( read more )..... 05/19/2010 Closed
10-01159 USA FDA GMP analytical chemistry laboratory needed for method development and validation for polymer analysis by GPC. Also please include a quote for the cost of each GPC analysis. Please reply asap. Thank you. ( read more )..... 05/13/2010 Closed
10-01140 California Materials Laboratory needed for accelerated testing on scent on plastic film will last six months. I can't wait the six months for the test results. I need to be able to determine in a one to two week test if the scent will last at least six month on the film. ( read more )..... 05/12/2010 Closed
10-01136 Dubai, Middle East Product Safety Laboratory required to test our 20/25 Ltr jerry cans made in UAE and get the UN certification. ( read more )..... 05/10/2010 Lab Needed
10-01118 Canada Materials Laboratory needed for ASTM testing, ASTM D5338 on plastic product. ( read more )..... 05/07/2010 Closed
10-01089 USA Materials Laboratory required for ASTM testing to ASTM C67 - Section 8, ASTM C67 - Section 9, ASTM C140-03 - Section 6, ASTM C140-03 - Section 7, ASTM C1028-06, ASTM C1028-07, ASTM D2394-05E1 ASTM E108-007 ( read more )..... 05/03/2010 Closed
10-01041 Microbiology Laboratory needed for bacteria testing of PVC film. Need to test for bacteria on inside of film as well as outside. ( read more )..... 04/24/2010 Closed
10-00997 USA Materials Laboratory needed for Polymer MALDI testing ( read more )..... 04/21/2010 Closed
10-00992 India ISO Materials laboratory needed for material burn or foreign particle testing ( read more )..... 04/20/2010 Closed
10-00976 INDIA FDA GMP MATERIALS LABORATORY NEEDED FOR PERMEATION TESTINF ON PTFE SAMPLE WITH HELIUM AND WATER VAPOUR ( read more )..... 04/19/2010 Closed
10-00965 USA Materials laboratory needed for ANSI Testing of cast acrylic sheet to ANSI Z26.1.1996 ( read more )..... 04/19/2010 Closed
10-00951 New Zealand Plastics and Polymers Materials Laboratory needed for testing Thermoformer film approved for boil in the bag application being reheated during microwaving of product by customers. Need testing to show if cooking instructions are followed, that film does not exceed 100oC at any site on the packaging. Also need to know at what temperature during microwaving, that blistering of packaging may occur and migration of plastic components to product. ( read more )..... 04/19/2010 Closed
10-00911 Analytical Chemistry Laboratory needed for TGA testing of polymer samples for the amount of carbon black in a thermoplastic elastomer. So was expecting to need both N2 and air to be used during the TGA. Please let me know if you have this capability and what additional information is required for a quote. ( read more )..... 04/16/2010 Closed
10-00902 India Weathering Laboratory needed for weathering testing or printed self adhesive vinyls pasted on polycarbonate sheets tested for outdoor weathering - to see at what point in time the fading starts ( read more )..... 04/10/2010 Lab Needed
10-00871 US materials laboratory needed for ASTM property testing standard / method typical values evaluation of microstructure and distribution of silicon in BC Matrix SEM Density ASTM- C20 ASTM- C135 2.5 -2.6 g/cc Hardness KNOOP 1Kg KNOOP 2Kg 24-28 Gpa in Knoop 1 Kg Fracture Toughness, Klc Notched Beam ASTM C1421 5.00 MPa-m½ Flexural Strength (MOR), 200 C ASTM- F417 ASTM C1161 240-280 MPa Elastic Modulus, 200 C ASTM- C848 350-380 GPa Poisson's Ratio, 200 C ASTM- C848 ASTM E ( read more )..... 04/01/2010 Closed
10-00857 Indian laboratory to test fiber glass panels used for making water tanks, for portability of water cytotoxicity test,as per IS14399. ( read more )..... 03/30/2010 Lab Needed
10-00841 Laboratory to test the following: Neoprene Rubber Disc Of size 435*395*29mm Test Required 1) Polymer 2) Polymer Content 3) Shore Hardness 4) Tensile Strength 5) Elongation at Break 6) Compression Set ( 24 Hrs at 100 degree C) 7) Change in properties after ageing for 70 Hrs at 100 degree C Shore Hardness Tensile Strength Elongation at Break ( read more )..... 03/29/2010 Closed
10-00829 Laboratory to conduct GPC test for polymer molecular weight ( read more )..... 03/29/2010 Closed
10-00827 US laboratory to test BSA adsorption on multi-layer plastic bottles, PET, COC, etc. Write protocol and execute tests. ( read more )..... 03/29/2010 Closed
10-00822 ASTMD, IDO laboratory to test polymers for the following: 1. Refractive index 2. Critical Surface Tension 3. Coefficient of linear expansion 4. Specific resistance 5. Surface resistance 6. Dielectric loss Tangent 7. Differential Scanning Calorimetry 8. Thermogravimetric analysis ( read more )..... 03/29/2010 Closed
10-00813 Canada FDA, ISO laboratory to conduct bio-compatibility testing (FDA and ISO 10993 testing) for EO sterilized silicone and acrylic permanent implants " ( read more )..... 03/28/2010 Closed
10-00792 Eastern US ASTM laboratory needed for ASTM F640 Standard Test Methods for radiopacity of plastics for medical wse -- I want a qualitative determination of radiopacity for a polymer. ( read more )..... 03/27/2010 Closed
10-00773 China or Colombia GMP laboratory to test large plastic components for weathering and impact ( read more )..... 03/27/2010 Closed
10-00759 India Materials Laboratory needed for oil immersion test ester based or alpha olefin based synthetic compressor oils at room temp. for min.70 hrs. after testing no sample shall exhibit swelling greater than 25% ( read more )..... 03/27/2010 Closed
10-00757 India NABL Physical Laboratory needed for certification testing of stainless steel Bands / Buckles / Clips (For coating purpose material used as Black PPA - Thermoplastic and Black Polyester) made by using material SS201 / SS304 / SS316 /SS317L / MONEL 400 / CARBON STEEL. Please note that for all test shall passed standard of complies with IEC 62275:2006-10 with the sub clauses : 9.1, 9.7, 9.7.1, 9.7.2, 9.7.3, 11, 11.1, 11.2. Pls confirm that test report should clearly indicate if the pro ( read more )..... 03/27/2010 Closed
10-00750 Philippines ASTM laboratory to test fungi or bacteria for biodegradability of starch/polyethylene plastic films ( read more )..... 03/27/2010 Closed
10-00690 Analytical Chemistry Laboratory needed for ASTM Testing plastic products per ASTM D5526 ( read more )..... 03/19/2010 Closed
10-00646 USA Physical Laboratory needed for National Fire Protectoin Agency NFPA Testing of EDPM Blended rubber for NFPA Code 90b smoke test. ( read more )..... 03/15/2010 Closed
10-00642 Asia Physical Laboratory needed for testing of Density,Water Basorbtion,Tensile Strength and elongation at breaking,tear strength,Deflection Temparature of Plastiscs under Flexural Load,Comppressive strength,Melt Flow Index,Melting Point(Tm),Thermal Conductivity (9 test method) ( read more )..... 03/10/2010 Closed
10-00635 Asia Packaging Analytical Chemistry Laboratory needed for determination of Intrinsic Viscosity for PET PCR & Regridn Preform using solution viscometry. ( read more )..... 03/10/2010 Closed
10-00611 Canada Product Saety and Certification Laboratory needed for Pre-Shipment Inspection on Pressed & Baled Recycled PET Bottles. It is waste material that will be exported to Indonesia to be processed as polyester fibers. On the Pre Shipment Inspection, it has to indicate that the plastic scrap being exported does not contain toxic & hazardous materials, oil, garbage, vegetation, animals, insects, chemical waste, indstrial waste, explosive waste/material and/or foregin objects with no evdence of r ( read more )..... 03/03/2010 Closed
10-00604 Analytical Chemistry Laboratory needed for deformulation testing of adhesive chemical mixture with percentages and chemical names. ( read more )..... 03/03/2010 Closed
10-00589 University Researchers needs Analytical Chemistry Laboratory for Gel permeation chromatography on acrylamide hydrogels ( read more )..... 03/03/2010 Closed
10-00562 ISO MidAtlatic USA Materials laboratory needed for ASTM FTIR Testing (polymer/filler identification), TGA (Polymer/oil content, filler content, low volatiles), DSC (softening pt, melting pt, recrystallization temps) ( read more )..... 02/28/2010 Closed
10-00553 Materials Laboratory needed for Rosin resin testing - MALDI. MALDI is matrix-assisted laser desorption/ionization mass spectroscopy, or MALDI mass spec for short. ( read more )..... 02/25/2010 Closed
10-00551 India Analytical Chemistry Laboratory needed for gel permeation chromatography (GPC) mol. wt. testing and mol. wt. distribution using GPC for water soluble polymer ( read more )..... 02/25/2010 Closed
10-00549 Packaging Laboratory needed for ASTM Testing of laminate for Water Vapor Transmission Rate (WVTR) & Oxygen Transmission Rate (OTR) ( read more )..... 02/25/2010 Closed
10-00536 Large electronics mfg need IPC-TM-650 2.3.28 Ionic Chromatography testing as process qualification on modled electronics parts This test is required when starting a new assembly line, switching to a new printed circuit board supplier, changing a pcb supplier processs or materials, or moving to a new contract manufacturer. The test should be performed annually to ensure the CM has maintained the quality of work. Ionic Chromatography measures the amount of ionic contamination that is present on ( read more )..... 02/25/2010 Closed
10-00534 Asia Mechanical laboratory needed for ASTM Testing of PE pipes such as ASTM D1505, D1238, D790, D638, D1693, F1473, D2837, D746, D1603, D792, F74, D3350 & D1248 on plastics and polymers ( read more )..... 02/24/2010 Closed
10-00508 Texas Materials laboratory needed for DSC - polymer testing Wanted to see thermogram ( read more )..... 02/22/2010 Closed
10-00499 Materials Laboratory needed for certification testing that polymers to be able to certify that they are latex and gluten free as well as other allergen-free (inc. tree nuts, peanuts, soybeans, eggs, milk, wheat, fish, crusteaceans) ( read more )..... 02/18/2010 Closed
10-00476 Midwest USA analytical chemistry laboratory needed for resin testing of Phenolic part tested for resin composition, fiber type and distribution of lengths, other materials, filler, ect, % of each component by weight and volume." ( read more )..... 02/17/2010 Closed
10-00474 USA Materials needed for ASTM Testing, Extended (up to 2 weeks) testing to ASTM D3616-95 followed by optical dimensional measurement. ( read more )..... 02/16/2010 Closed
10-00445 India Physical Laboratory needed for raw material testing for plastics pvc or pet. Required testing: tear, tensile, haze, shrinkage, co- efficient(dyanamic, static). ( read more )..... 02/14/2010 Closed
10-00436 UK Analytical Chemistry Laboratory needed for Chemical Oxygen demand (COD) & Biochemical Oxygen demand - 5 (BOD-5) Both tests on polymer samples ( read more )..... 02/12/2010 Closed
10-00400 Packaging Laboratory needed for testing OPP packaging tape for FDA indirect food contact. ( read more )..... 02/08/2010 Closed
10-00349 Analytical Chemistry Laboratory needed for Gravimetric Analysis Testing of plastic injection molded parts using . ( read more )..... 02/02/2010 Lab Needed
10-00345 Physical Laboratory needed for failure analysis of a polyurethane material for litigation. We have the failure of a polyurethane material and need to find out what exactly failed. ( read more )..... 02/02/2010 Closed
10-00300 India or Asia ASTM Physical Laboratory needed for testing crushed PET flakes. Testing required for, (1)Average grit size, (2)Dust(<1mm particles) content, (3)Moisture content, (4)Intrinsic Viscosity (IV value), (5)Bulk density, (6)PVC content, (7)Polyolefin content, (8)Sugar content (9)MFI value ( read more )..... 01/29/2010 Closed
10-00293 USA Physical/Chemical Laboratory needed for testing polyethylene caps that are cracked. Need to know if they are cracked due to raw material defect or other reason. Will also require resistance testings on some of them. ( read more )..... 01/28/2010 Closed
10-00291 Analytical Chemistry Laboratory needed for testing AA in PET using ASTM F-2013-05 or functional equivalent. Testing purposes are to establish validity of lab operations. ( read more )..... 01/28/2010 Closed
10-00289 Indian Physical ASTM Laboratory needed for testing MVTR of polyester film. ( read more )..... 01/28/2010 Closed
10-00268 USA Physical Radiochemistry Laboratory needed for radiation emissions testing from foam with Tourmaline. ( read more )..... 01/26/2010 Closed
10-00253 Nanotechnology Physical Laboratory needed for heat deflection testing and heat distortion of polymer nanocomposite materials. ( read more )..... 01/25/2010 Lab Needed
10-00196 USA Physical Laboratory needed for AMS testing against AMS-T-81914 standard ( read more )..... 01/19/2010 Closed
10-00181 Materials Laboratory needed for Polymer Analysis of single layer polyvinyl alcohol film produced by blown extrusion. Identify the materials, formula or sufficient detail on characteristics to determine formula ( read more )..... 01/17/2010 Closed
10-00171 Materials Laboratory needed for RoHS testing of LDPE/LLDPE base Lamination and Stretch Film at Aurangabad(M.S.). We want to check RoHs content in our PE film. Kindly let us know the testing charges for RoHS test. Pl. send us quotation for RoHS test. ( read more )..... 01/15/2010 Lab Needed
10-00150 Materials Laboratory needed for testing P95 acrylic material made in the US against sampke produced in China. How do the 2 materials compare? What acceptable national standards are there? Is there any evidence of any hazardous material in the Chinese sub and what is the acceptable national standard for each. ( read more )..... 01/14/2010 Closed
10-00135 Materials laboratory needed for ASTM D2582 testing done on Urethane Coated Fabric ASTM D2582 Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting. Will your lab be able to help us? ( read more )..... 01/13/2010 Closed
10-00133 Canada ISO Laboratory needed to measure siloxane cyclics (D4-D6) in water and alcohol solutions using gas chromatography. There will be 150-300 samples. ( read more )..... 01/13/2010 Closed
10-00117 Colorado Environmental Laboratory needed for municipal sludge testing and wastewater testing to detect presence of compounds that could be responsible for clogging membrane treatment system - wastewater came from used oil field tanks so test for oil compounds or polymer is needed ( read more )..... 01/12/2010 Closed
10-00108 Materials laboratory needed for ASTM Testing ASTM D-5526 and ASTM-D-5511 on PVC film. ( read more )..... 01/12/2010 Lab Needed
10-00107 Product Safety Laboratory needed for 2002/72/EC EC1935/2004 82/711 85/572EEC testing Plastic woven bags to pack farmers products. ( read more )..... 01/12/2010 Closed
10-00101 Packaging Laboratory needed to testing Polymer for Food packaging application ( read more )..... 01/11/2010 Lab Needed
10-00074 Canada materials laboratory needed for static and dynamic friction testing ( read more )..... 01/07/2010 Closed
10-00044 GLP Materials Laboratory needed to characterize acrylic polymer produced from mostly acrylonitrile monomer by free radicalic polymerization. In fact, The acrylonitrile monomer contains some amount of impurities like acrolein, acetonitrile, crotononitrile etc.. I think that these impurities chemicially bonded to the main chain of the polymer. For example impurities behave as transfer agent in the polymerization step. Is there any way to determine the quantity of these impurities in the polymer ( read more )..... 01/06/2010 Closed
10-00029 GERMANY MATERIALS LABORATORY NEEDED FOR ISO 21461, PAH ANALYSIS ( read more )..... 01/06/2010 Closed
09-2538 India Analytical Chemistry Laboratory needed to estimate molecular weight of water soluble polymer. Plastics and Polymers ( read more )..... 12/30/2009 Closed
09-2522 Analytical Chemistry laboratory needed for impurity testing of Nylon 6 polymer, Cyclic Dimer (impurity present in the oligomer) does it contain; by GC/MS or any other standard method. ( read more )..... 12/26/2009 Closed
09-2518 Materials Laboratory needed for atomic weight of thermoplastic resin, is a hardly soluble type material. I want to know the molecular weight of the resin, but it is not soluble in THF, NMP, Chloroform, DMSO. ( read more )..... 12/26/2009 Closed
09-2514 Malaysia Analytical Chemistry Laboratory needed for QC Testing : Benzophenone, 4-Methylbenzophenone (4-MEBP),4-Hydroxybenzophenone, N-ethyl-toluenesulfonamide (NETSA) ( read more )..... 12/26/2009 Closed
09-2504 Canada Materials Laboratory needed for ASTM Testing, Moisture content in propane/propylene mixture. ( read more )..... 12/22/2009 Closed
09-2474 Analytical Chemistry Laboratory needed for phthalates testing BPA ie bis phenol A and phthalates in plastic. ( read more )..... 12/17/2009 Closed
09-2453 North America Materials Laboratory needed for ISO 179 charpy impact testing on phenolic plastic testing in accordance to iso 179 standard ( read more )..... 12/15/2009 Closed
09-2443 Materials Laboratory needed for ASTM Testing, ASTM D5338 ASTM D5526 ( read more )..... 12/14/2009 Closed
09-2441 Analytical Chemistry Laboratory needed for ASTM Testing, C108, Coefficient of Frintion Test (ASTM C1028) for Polyurethane Elastomer (Polymer) ( read more )..... 12/14/2009 Closed
09-2420 USA Consumer Products Laboratory needed for biodegradeability testing of polypropylene plastic 3 ring binder that we need tested to see if it is in fact biodegradable. ( read more )..... 12/10/2009 Closed
09-2410 Plastics and Polymers Laboratory needed for polyurethane testing wood floor to determine what finish was used. i.e. polyurethane or moisturecure ( read more )..... 12/09/2009 Closed
09-2387 ISO Materials Certification Laboratory needed to certify foam to ISO 4589-3 (4.4) ( read more )..... 12/08/2009 Closed
09-2369 Asia Plastics and Polymers, Analytical Chemistry Laboratory needed to deformulate a material used as a seam sealant in textile application. Need to identify the types of polymers, solvents, and hardeners used. ( read more )..... 12/07/2009 Closed
09-2339 California Radiochemistry Laboratory needed for testing Foam material that triggered radiological scanners at the port in Long Beach, Los Angeles, need testing to make sure no radiation is found. ( read more )..... 12/03/2009 Closed
09-2309 Materials Laboratory needed for dielectric constant testing of ABS. Specimen Thickness = 3mm . Specimen Area = 1.5 inch x 1.5 inch. What is your basic rate? ( read more )..... 12/01/2009 Lab Needed
09-2282 Microbiology Laboratory needed for antimicrobial testing of plastic samples on antimicrobial properties for gram - bacteria, gram + bacteria, yeast and mold. About 15 samples each test. Please include quote. ( read more )..... 11/25/2009 Closed
09-2279 USA Analytical Chemistry Laboratory needed for ASTM F 1249, WVTR water vapor transmission rateat a range of temperatures, say from 10 to 45C, ( read more )..... 10/25/2009 Lab Needed
09-2263 Germany Microbiology Laboratory needed for EN standard tests ( read more )..... 11/24/2009 Closed
09-2243 Environmental Laboratory needed for ISO 14855 Biodegradation testing of plastic ( read more )..... 11/20/2009 Lab Needed
09-2236 USA/Canada polymer laboratory for failure testing of Polyethylene or Polyprolylene Bulk bags failure ( read more )..... 11/19/2009 Closed
09-2213 Eastern USA Physical Materials Laboratory needed for polyurethane testing, Stiffness of .142" OD Polyurethane tubing. Specification: 15,000 PSI maximum, condition samples at 23+or-2 degrees C & 50+or-5%RH, 16 hrs min before testing. Equipment: Tinius-Olsen stiffness tester. Samples: 30 ( read more )..... 11/17/2009 Closed
09-2148 Thailand Materials Laboratory required for testing Oxidative Induction Time (OIT) for HDPE pipes. ( read more )..... 11/09/2009 Closed
09-2111 Analytical Chemistry Laboratory needed to use analytic equipment to determine the percentage crystallinity of plastic. ( read more )..... 11/04/2009 Closed
09-2076 USA Analytical Chemistry Laboratory required to Identify the film layers in a laminate of Nylon and Polyethylene polymers. ( read more )..... 11/02/2009 Closed
09-2061 Texas Environmental Laboratory required for weatherability of vinyl coating on PVC foam ( read more )..... 10/30/2009 Closed
09-1972 Asia, USA FDA GLP or A2LA Analytical Chemistry Laboratory needed for PVC Tubing testing cyclohexanol concentration or residuals of PVC tubings applied in the method of headspace gas chromatography ( read more )..... 10/20/2009 Closed
09-1944 DIN 53453 Mechanical Laboratory required for impact test on plastic foam ( read more )..... 10/14/2009 Closed
09-1941 ASTM Environmental Laboratory required to test some plastic products of ours to see if they pass ASTM D6400 standards. ( read more )..... 10/13/2009 Closed
09-1928 Midwest USA ASTM Environmental Laboratory required to test if a bag truly meets ASTM D6400 standards ( read more )..... 10/12/2009 Closed
09-1901 New England Electrical Laboratory required for thermal aging test UL746C ( read more )..... 10/08/2009 Closed
09-1848 Southwest USA Plastics Laboratory required to identify a type of plastic coating. i have a baseline sample, and two samples which i like to know if one of sample matches with a baseline sample. ( read more )..... 09/30/2009 Closed
09-1836 West of China (Zhejian province or Shanghai)ISO 307 (2007-05) Rheology Testing Laboratory required to determination of viscosity number of PA materials ( read more )..... 09/29/2009 Closed
We are interested in measuring the shear viscosity of some of our polymer materials. The shear viscosity is around 35cP. What is the time frame and the cost? ( read more )..... Closed
09-1737 Rheological Testing Laboratory required for measuring the shear viscosity of some of our polymer materials. The shear viscosity is around 35cP. What is the time frame and the cost? ( read more )..... 09/15/2009 Closed
09-1699 ASTM Materials Laboratory required for testing bioplastic materials, utensils, bags and other ( read more )..... 09/10/2009 Closed
09-1682 India ASTM Environmental Laboratory required for testing for compostability ASTM D6400-04. ( read more )..... 09/07/2009 Closed
09-1666 Eastern USA Product Safety Laboratory required for ASTM D-4236 ( read more )..... 09/03/2009 Lab Needed
09-1648 USA Analytical Chemistry Laboratory needed for identity testing of PVC tubing with outer layer of PVC-D and an inner layer of ethylene-vinyl acetate. The spots are brown, resemble hard-water spots, and are located on the inside of the tube. They whip off easily with a clean cloth but appear to get worse over time. We would like to know the chemical identity of the spots so we can make corrective and preventative actions as necessary. ( read more )..... 09/01/2009 Closed
09-1635 USA Materials Laboratory required for Product Safety Testing. We import product from China in vinyl bags. We sell to a major retailer who is asking that these bags be tested for heavy metals. ( read more )..... 08/28/2009 Closed
09-1593 Eastern USA ASTM D 3675,ASTM E 162 Fire Laboratory required for Flame spread ( read more )..... 08/24/2009 Closed
09-1583 Materials or Packaging Laboratory required for testing for a custom poly plastic bag manufacturing company. Need to test the corrugated cardboard boxes that we are using from various suppliers. We are sending our products across Canada on train and we are experiencing box failure on the bottom layer of the skids. Please contact me as soon as possible if you feel that your company can provide us with a diagnostic comparison (samples from our suppliers) of the composition of the boxes we are prese ( read more )..... 08/21/2009 Closed
09-1578 Environmental Laboratory ISO 14855/CNS 14432, ASTM 6400/ CNS 14661 in multiple countries required for Biodegradation Testing. ( read more )..... 08/21/2009 Closed
09-1561 California Packaging Laboratory required for Hardness and/or brittleness testing on plastic screw cap. ( read more )..... 08/19/2009 Closed
09-1524 Asia ISOMaterials Laboratory needed for ASTM Testing, Intrinsic Viscosity determination for PET ( read more )..... 08/14/2009 Closed
09-1437 Plastics/Materials Laboratory required for testing DIN 16726 & DIN 52133 ( read more )..... 08/04/2009 Closed
09-1396 South Africa Plastics Laboratory required for testing of acetal plastic ( read more )..... 07/30/2009 Closed
09-1352 India ASTM Physical Laboratory needed to test Ultra high molecular weight polyethylene for: Density, Tensile strength, Yield strength, Elongation, Hardness, Ash content, Izod impact ( read more )..... 07/24/2009 Closed
09-1330 India ASTM Bioanalytical Laboratory needed for Biodegradability testing of High Density Polyethylene film sample, additivated with Prodegradants ( read more )..... 07/22/2009 Closed
09-1328 ASTM D5511-2 Bioanalytical Laboratory required for determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions ( read more )..... 07/21/2009 Closed
09-1306 Ontario (near TO) Physical Laboratory required for testing a spline/spline nut assembly. The spline must be fixed so that it cannot rotate. The spline nut is injected with nylon to form the female spline geometry. The spline nut will be rotated on the spline to determine the point that the injected nylon fails. ( read more )..... 07/16/2009 Closed
09-1247 USA ASTM D5511 Bioanalytical Laboratory required for determining anaerobic biodegradation of plastic materials under high-solids anaerobic-digestion conditions. ( read more )..... 07/07/2009 Closed
09-1183 USA Materials Laboratory needed for EN Testing of luer fittings tested to EN 20594-1 and EN 1707. ( read more )..... 06/22/2009 Closed
09-1162 USA, Mexico Weathering Laboratory needed for NES 66862NDS00 WEATHERABILITY TESTING OF Plastics Materials ( read more )..... 06/22/2009 Closed
09-1160 Analytical Chemistry Laboratory needed for Refractive index measurements of polymer films materials using an Abbe refractometer. ( read more )..... 06/22/2009 Closed
09-1152 UK materials laboratory needed for physical testing of self adhesive films against various criteria, peel strength, opacity, weathering, initial & ultimate adhesion,gloss levels, temperature resistance, salt spray,flexibility etc. Can you please respond with details of testing facilities you have, properties you can measure, costs & timescales. We anticipate a range of approximately 10 different materials applied to 6 different surfaces. This is for a major 'blue chip' client who will be heavil ( read more )..... 06/18/2009 Closed
09-1151 Packaging laboratory needed for physical properties testing of woven polypropylene laminated bags. ( read more )..... 06/18/2009 Closed
09-1148 UK Materials Laboratory needed for ASTM, FINAT testing of a range of self adhesive films for adhesion,opacity, weathering,gloss level,temp resistance,salt spray resistance,chemical resistance,abrasion,tear resistance,shrinkage ( read more )..... 06/18/2009 Closed
09-1130 China Manufacturer needs Asia Packaging Laboratory for Water Vapour Transmission Rate testing on several flexible plastic packaging materials. In particular we need to conduct WVTR testing on: - Woven High Density Polyethylene (HDPE) laminated with Low Density Polyethylene LDPE - Woven HDPE laminated with Aluminum foil - Extruded HDPE Film The norm to be used for the test is " ISO 15106-1:20039(E) Plastics-Film and sheeting determination of WVTR- ( read more )..... 06/15/2009 Closed
09-1112 Materials Laboratory needed for ISO 10819:1996 Mechanical vibration and shock -- Hand-arm vibration -- Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand Abstract Specifies a method for the laboratory measurement, the data analysis and reporting of the vibration transmissibility of gloves in terms of vibration transmission from a handle to the palm of the hand in the frequency range from 31,5 Hz to 1250 Hz. ( read more )..... 06/12/2009 Closed
09-1111 US materials laboratory needed for plastic film permeability testing ( read more )..... 06/12/2009 Lab Needed
09-1101 USA Analytical Chemistry Laboratory needed for analysis of Copper content in 11 solid (powder) thermoset powder coatings consisting of polyester resin and various inorganic and organic pigments, plus additives, generally organic materials. ( read more )..... 06/08/2009 Closed
09-1079 Weathering Laboratory needed for NES M0135-2008 Sunshine (Carbon arc) 2000 hrs, Sunshine Weathering ( read more )..... 06/08/2009 Closed
09-1048 USA Materials Laboratory needed for TMA testing to determine softening (Tg) and crystallization temperature for polymer samples. ( read more )..... 06/01/2009 Closed
09-1010 Packaging Laboratory needed for ISO 4892 UV testing for polycarbonate boxes ( read more )..... 05/27/2009 Closed
09-1007 India Mechanical Laboratory needed for BS Testing, Wear resistance testing facility for pvc/nitrile extruded profile(kind of Rubber) (wiper tip)as per the standard BS 903A1 ( read more )..... 05/27/2009 Closed
09-0995 India Materials Laboratory needed for failure investigation testing of rubber elastomer sealing rated to 400 degF but recently has failed. We are not sure how and why it failed and would like to know the mode/cause of failure. Is it chemical/ mechanical or thermal? ( read more )..... 05/22/2009 Closed
09-0973 USA or Canada Materials Laboratory needed for Opacity Testing to Xrays of plastic chips filled with radiopaque additive. ( read more )..... 05/18/2009 Closed
09-0943 Toronto Analytical Chemistry Laboratory needed to test silicone gel for dielectric strength and constant ( read more )..... 05/12/2009 Closed
09-0940 USA Environmental Laboratory needed for ASTM Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test ( read more )..... 05/12/2009 Closed
09-0939 Germany Environmental Laboratory needed for ASTM Testing, Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test ( read more )..... 05/12/2009 Closed
09-0871 particle size and compositional analysis of the polymer produced from styrene, butyl acrylate, and acrylic acid monomers. What analytical techniques do you suggest? I only have approximately 200 mg of dried material, the polymer spheres are expected to be a few tens of nanometers in diameter. ( read more )..... 05/07/2009 Closed
09-0859 Plastics Manufacturer needs Tennessee Physical Laboratory for Load testing an undergroud box for stormwater detention ( read more )..... 05/04/2009 Closed
09-0854 INDIA ISO PHYSICAL LABORATORY NEEDED FOR MULTIAXIAL IMPACT TESTING ( read more )..... 05/04/2009 Closed
09-0851 India ISO Materials Laboratory needed for ASTM Testing, Compressive strenght of pavers made of recycled Polypropylene ( read more )..... 05/04/2009 Closed
09-0848 Canada Materials Laboratory needed for raw material testing of Polypropylene. We would like to know that the grade of material so that we can buy the same raw material to produce same product. Please contact us for further information. ( read more )..... 05/04/2009 Closed
09-0847 Plastics and Polymer, Materials Laboratory needed for quality and longevity testing on water pipeline rubber rings ( read more )..... 05/04/2009 Closed
09-0797 Eastern USA EPA, OECD Environmental Laboratory needed for Modified OECD 301C biodegradation testing on aqueous polymer dispersions Biodegradation - OECD Method 301C ( read more )..... 04/22/2009 Closed
09-0773 USA Materials Laboratory needed TOF-SIMS quantitative assessment of polymer additives. Measurements to be made as a function of position in sample. ( read more )..... 04/20/2009 Closed
09-0761 Asia Analytical Chemistry Laboratory needed to determine molecular weight of plastic resin not soluble in chloroform, hexane,NMP and water. So might need to find a method to determine the way in solid phase. ( read more )..... 04/20/2009 Closed
09-0755 Dubai or UAE Product Safety Laboratory needed for full RoHs Testing with flame retardent PBB & PBDE. I also need the testing of Phthales in Optical disc. ( read more )..... 04/20/2009 Closed
09-0746 Plastics and Polymers Laboratory needed for radiopacity testing on silicone wound drains. Testing is to be performed on each production lot, ongoing basis. Project is in quotation phase. ( read more )..... 04/20/2009 Closed
09-0734 Materials laboratory needed for testing piece of rubber for petroleum content at .001 ppm and silica flouride ( read more )..... 04/20/2009 Closed
09-0718 India Materials Laboratory needed for ASTM D 3985 OTR Testing has to be done in NABL accredited laboratory in India on polymeric films. ( read more )..... 04/14/2009 Closed
09-0664 USA Materials Laboratory needed for Material Characterization - Phase Morphology of a coating applied to a silicone substrate. Specifically, characterizing the degree of amorphous/crystalline material in the coating. ( read more )..... 04/03/2009 Closed
09-0604 Materials Laboratory needed for physical testing two plastic materials for transmittance and/or absorbance with a spectophotometer. The tube material is opaque in the visible spectrum, so we are interested in frequency ranges where it might appear somewhat transparent. Preferable deliverable is a transmittance spectrum for each material. Please contact me and let me know how much material you would require, lead time, and cost. ( read more )..... 03/25/2009 Closed
09-0601 Canada Manufacturer needs Analytical Chemistry Laboratory for Deformulation Testing of PTFE resin to determine ingredients ( read more )..... 03/25/2009 Closed
09-0598 India Company needs ISO India Material Laboratory for GC/MS testing to I=identify different polymers used in the filament/ GC/MS ( read more )..... 03/25/2009 Closed
09-0567 India Materials Laboratory needed for JIS L 08421 light fastness testing for plastic ( read more )..... 03/20/2009 Closed
09-0538 China Manufactureer needs China Materials Laboratory for Water Vapor Transmission Rate testing to be conducted on a sample of plastic woven material ( read more )..... 03/17/2009 Closed
09-0537 Asia Manufacturer needs materials laboratory for component analysis of epoxy. ( read more )..... 03/17/2009 Closed
09-0521 Boston Analytical Chemistry laboratory needed for GC/MS testing and/or LC/MS testing of oils. ( read more )..... 03/13/2009 Closed
09-0513 Physical Laboratory needed for ASTM Testing: ASTM D882 (Tensile strength, Elongation and Modulus of PET sheet)& ASTM D790 (Flexural Strength and modulus for PET Sheet Materials) ASTM D256 (Impact strength for PET Sheet) ASTM D1003 (Light Transmission and Haze for PET sheet) ASTM D648A-B for PET sheet ( read more )..... 03/12/2009 Closed
09-0506 Coatings Manufacturer needs Texas Laboratory for flammability testing to determine fire rating on an elastomer,& its thermal properties ( read more )..... 03/12/2009 Closed
09-0498 California importer of sky garments from Italy to the US needs water resistance AATCC and ASTM certification testing For the purposes of subheadings 6201.92.15, 6201.93.30, 6202.92.15, 6202.93.45, 6203.41.05, 6203.43.15, 6203.43.35, 6204.61.10, 6204.63.12, 6204.63.30 and 6211.20.15, the term "water resistant" means that garments classifiable in those subheadings must have a water resistance (see ASTM designations D 3600-81 and D 3781-79) such that, under a head pressure of 600 millimeters, n ( read more )..... 03/11/2009 Closed
09-0493 Greece polyethylene pipes manufacturer needs Europe analytical chemistry laboratory for testing PE pipes to ensure they are suitable for drinking water applications. ( read more )..... 03/11/2009 Closed
09-0481 Large, Multinational Chemical Manufacturer needs California Physical Laboratory for ASTM E-84 flammability testing re plastic plank ( read more )..... 03/09/2009 Closed
09-0461 India Materials Laboratory needed for IS Vinyl Testing as per IS:8698 ( read more )..... 03/08/2009 Closed
09-0450 Analytical Chemsitry Laboratory needed for polymer deformulation testing ( read more )..... 03/04/2009 Closed
09-0436 USA Food and Beverage Analytical Chemistry Laboratory needed for Hexane extractables/ xylene extractables for food contact film ( read more )..... 03/03/2009 Closed
09-0418 Consumer Products Manufacturer needs FDA GMP Analytical Chemistry Laboratory for FDA product safety testing on polyethylene mugs. ( read more )..... 02/26/2009 Closed
09-0411 USA Microbiology Laboratory needed for testing Anaerobic biodegradation of plastic under high-solids anaerobic digestion ( read more )..... 02/26/2009 Closed
09-0398 Packaging Manufacturer needs UK Packaging Laboratory for FDA Migration Testing (EU Directive 82/711/EEC) for Heavy Metals -migration -PAAs ( primary aromatic amines ) - Retained Solvents The Sample is printed polyproplyen laminated with metalized polyproplyen by using polyurthan adhessive plese i need all details for fee of this analsis and time required and delivery method that is urgent issue please send replay to me as soon as possiple ( read more )..... 02/25/2009 Closed
09-0393 Canada ISO Materials Laboratory needed for Hardness testing, Shore D between 80 to 85 Test of Epoxy Resin hardness. To determine hardness properties after curing. ( read more )..... 02/24/2009 Closed
09-0378 Europe materials laboratory needed for Directive 94/62/EC Testing to determinate level of lead and cadmium in plastic packaging. ( read more )..... 02/23/2009 Closed
09-0337 USA A2LA Materials Laboratory needed for ASTM D5511, Biodegradibility Testing ( read more )..... 02/16/2009 Closed
09-0336 USA Virology/ Microbiology Laboratory needed for viral penetration studies of various plastic films ( read more )..... 02/16/2009 Closed
09-0332 Europe Materials Laboratory needed for ISO 21461, Determination of aromaticity testing of oil or PAHs in vulcanized rubber compound ( read more )..... 02/13/2009 Closed
09-0324 University needs UK materials laboratory for Electrical conductivity testing of acidic viscous polymer solution ( read more )..... 02/13/2009 Closed
09-0323 UK analytical chemistry / rheology laboratory needed for viscosity, surface tension,and rheology testing of Acidic viscous polymer solution ( read more )..... 02/13/2009 Closed
09-0248 ISO ASTM Materials or Mechanical Laboratory required for testing the following: iso 844. iso 845, iso 1922, iso 2896, ASTM D 1621 ( read more )..... 02/03/2009 Closed
09-0242 USA Materials Laboratory needed for ROHS product safety testing, lead content in plastic. ( read more )..... 02/02/2009 Closed
09-0227 USA FDA (21 CFR 177) Toxicology Materials Laboratory required for product safety testing on a plastic item for the type of polymer(s) that it is. This item comes into contact with alcoholic begerages (wine) that will often be in excess of 8% alcohol. ( read more )..... 01/30/2009 Closed
09-0226 Texas Plastics/Materials Testing Laboratory needed for several plastic inj molded parts which need to have their respective grade,type, filler polymers identified. ( read more )..... 01/30/2009 Closed
09-0172 USA ASTM Materials or Plastics Laboratory needed for plastic film tested under ASTM D6400. ( read more )..... 01/23/2009 Closed
09-0145 North America ASTM Materials Laboratory needed for ASTM biodegradability testing, oxo-biodegradable additive, prodegradant for polyolefins (film, sheet). Need testing of polypropylene sheet as per ASTM 6954. ASTM 6954-04 Standard Guide for Exposing and Test Plastics that Degrade in the Environment by a combination of Oxidation and Biodegradation sets out the guidelines for evaluation of oxo-biodegradable plastics. This guide is divided in distinct parts: - Thermal or photo-oxidative oxidation wi ( read more )..... 01/21/2009 Closed
09-0120 FDA Materials Laboratory required for test 21 CFR 177.1990 (PVDC Wrap). ( read more )..... 01/19/2009 Closed
09-0090 USA Electrical Laboratory needed to measure the electrostatic charge of High Impact Polystrene (HIPS) material. The sample pieces are rougly 4-5 mm in size. ( read more )..... 01/15/2009 Closed
09-0062 Europe/Turkey ISO Analytical Chemistry Laboratory needed for lead testing. We are manufacturer of PVC window and door profile and we use lead based pvc stabilizer for pvc compound.We want to analyze lead content to our stabilizers. I think they include %30-45 lead. The stabilizer compound also include some organic materials like lubricants. ( read more )..... 01/12/2009 Closed
09-0014 Colorado Analytical Chemistry Laoratory needed for MW composition of parffin wax by Gel Permeation Chromatography. ( read more )..... 01/06/2009 Closed
09-0009 USA/Inida UL 1446 Electrical Laboratory needed for sealed tube test - electrical insulation testing as per UL 1446. After completion of a long-term thermal aging program, manufacturers may wish to add new minor components to the EIS. Such components include but are not limited to fastening tapes, tie cords, balancing compounds and other materials commonly used in mechanical applications. Rather than conducting another long-term thermal aging program to address the chemical compatibility of thes ( read more )..... 01/05/2009 Closed
08-2646 Europe BS EN 1225 Plastics Laboratory needed to test biodegrability of plastics or polymers. ( read more )..... 12/29/2008 Closed
08-2642 India Physical Laboratory needed for Testing of Rigid Polyurithen Foam, Expanded Polystryne and Rockwool for variour parameters. ( read more )..... 12/28/2008 Closed
08-2638 USA Medical Devices Biomaterials Laboratory needed for evaluating new plasticizers to be used in our primary bags. We have narrowed the selection to DINCH (1,2-Cyclohexanedicarboxylic acid diisononyl ester) or TOTM (Tri Octyl Trimellitate). I would like to be contacted to talk about your abilities to test for these compounds in a 4% sodium citrate solution. ( read more )..... 12/28/2008 Closed
08-2618 USA Materials Laboratory needed for ASTM biodegradability testing, oxo-biodegradable additive, prodegradant for polyolefins (film, sheet) We contact you for testing polyethylene film as per ASTM 6954. ASTM 6954-04 Standard Guide for Exposing and Test Plastics that Degrade in the Environment by a combination of Oxidation and Biodegradation sets out the guidelines for evaluation of oxo-biodegradable plastics. This guide is divided in distinct parts: - Thermal or photo-oxidati ( read more )..... 12/28/2008 Closed
08-2613 India Materials Laboratory needed for ASTMD5511 biodegradability testing of pvc film material ( read more )..... 12/26/2008 Closed
08-2610 Materials Laboratory needed to determine free toluene diisocyanate content in a urethane prepolymer? This is usually done by derivatizing the TDI and then analyzing by HPLC. ( read more )..... 12/26/2008 Closed
08-2608 Materials Laboratory needed to peform DSC or TGA testing on epoxy samples. ( read more )..... 12/26/2008 Closed
08-2606 Europe FDA, GMP materials laboratory needed for plastics testing, we need to check if the material complies with FDA requirements (mainly PVC and silicone hoses) for plastics in contact with food/drinking water. ( read more )..... 12/26/2008 Closed
08-2603 Asia Analytical Chemistry, Materials Laboratory needed for recertification testing of Polycarbonate Resin, old grade which are over 2 years (the guarantee shelf life is 2 years). These resin are to be done injection and built parts which are assembled on to medical products. We would like to see whether they are still suitable for the Medical Devices application or not since they are now over 2 years. ( read more )..... 12/26/2008 Closed
08-2597 China Preferred ASTM D256, D1238, D1003 Materials Laboratory needed for testing - DOW CALIBRE MEGARAD 2081-15 Polycarbonate,FC030006, shelf life is two years,but we have materials which are over two years, need to test whether they are suitable for use in medical products or not. ( read more )..... 12/23/2008 Closed
08-2585 Mexico Materials Testing Laboratory needed for testing Intrinsic viscosity of PET (we have Recycle Pellet PET). ( read more )..... 12/22/2008 Closed
08-2572 San Diego, California Materials Testing Laboratory needed for Differential Scanning Calorimetry of polycarbonate in two different conditions. ( read more )..... 12/19/2008 Closed
08-2563 Eastern USA Analytical Chemistry Laboratory needed for fluorine NMR testing for fluorinated polymers in solution. ( read more )..... 12/18/2008 Closed
08-2558 India ASTM Materials Testing Laboratory needed for: Plastics Discoloration Testing Physical Properties Testing Simulated Environmental Exposures Testing Studies Heat Deflection Testing Mechanical Properties Testing Peel Strength Testing Flexure Modulus Testing  Tensile Strength Testing  Elongation Testing  Hardness Testing  Thermal Properties Testing  Solvent Resistance Testing Tensile Modulus Testing  Solubles Testing  Dielectric Constant Testing  Deflection Testi ( read more )..... 12/17/2008 Closed
08-2545 Any Location Plastics Testing Laboratory needed for Permeability Analysis of Plastic Sheets - Oxygen, Carbondioxide and Water Vapor Transmission on Plastic sheets such as PET and PVC. ( read more )..... 12/15/2008 Closed
08-2539 Analytical Chemistry Laboratory needed for testing unreacted terephthalic acid monomers in PET(Polyethylene terephthalate) resin. It can be done using HPLC or maybe even GPC. ( read more )..... 12/15/2008 Closed
08-2497 Canada ASTM D5209-92, D5247-92, D5271-93, etc Environmental Laboratory needed for biodegradability testing in accordance with Canadian Standards Association. ( read more )..... 12/05/2008 Closed
08-2472 USA ISO, A2LA, AMS Physical Laboratory needed for AMS-T-81914 testing. ( read more )..... 12/03/2008 Closed
08-2451 Any Location ISO 177:1988 Mechanical Testing Laboratory needed for migration of plasticizers in PVC material (sandwitch type test of)... Hard chrome plated steel plate Contact plate(Polystyrol 165N) Test sample(PVC shore A 30) Contact plate(Polystyrol 165N) Hard chrome plated steel plate ( read more )..... 12/02/2008 Closed
08-2423 USA ASTM D5511 Materials Testing Laboratory needed for anaerobic biodegradaion test of plastic film. ( read more )..... 11/25/2008 Closed
08-2378 India/China Materials Laboratory needed for testing epoxy resin for grade, quantity, quality, ratio etc. ( read more )..... 11/19/2008 Closed
08-2377 India Physical Testing Laboratory needed for Materials Screeds Testing: Compressive strength, Residual Humidity, Waterproofing: Elasticity, Adhesion to substrate Adhesives: Shear Strength, Tensile Strength, Adhesion / bond & compatibility with above mentioned stones Grouts: Compressive strength, Resistance to abrasion, Water absorption, De-colorization, Stain Sealents: De-colorization, Stain tests, Shore hardness, elasticity, ultimate elongation ( read more )..... 11/19/2008 Closed
08-2321 Eastern USA ISO 307 Materials Testing Laboratory needed for Viscosity Number for PA6/6T Plastic (BASF Ultramid TKR 4355 G7). Must use (ISO 307) method. This requires dissolving in H2SO4. ( read more )..... 11/11/2008 Closed
08-2292 Alberta Polymer Material Testing Laboratory needed for melting point of a polymer forming in a petrochemical plant. ( read more )..... 11/06/2008 Closed
08-2288 Ohio ASTM D5511 or equivalent Environmental Testing laboratory needed for biodegradability ( read more )..... 11/06/2008 Closed
08-2234 Europe Plastics and Polymers Laboratory needed for standard Luposol Stress Crack Testing on plastic parts injected in PE-HD for the automotive industry for resistance to stress cracks from exposure to fuels ( read more )..... 10/30/2008 Closed
08-2226 Europe MIL-I-23053/1 Materials Laboratory needed for Analysis of the sleeving composition which needs to be in accordance with the standard MIL-I-23053/1 ( read more )..... 10/29/2008 Closed
08-2122 Canada analytical chemistry laboratory needed for ASTM Testing for asphaltenes and maltene content in the sample to ASTM D6560 ( read more )..... 10/21/2008 Closed
08-2097 Materials Laboratory needed for EN 12606-1 testing for Paraffin Wax Content ( read more )..... 10/15/2008 Closed
08-2081 USA Toxicology Laboratory needed for product safety laboratory of Fe based ink between two sheets of card that are glued together once the ink is dried. The ink encloses the Fe in a plastic a plastic ink base. We are interested in how much iron might enter the bloodstream if an area of an assembled sheet is eaten, ( read more )..... 10/14/2008 Closed
08-2080 US Matericals Laboratory needed for AASHTO testing of cured out urethane for Hardness, Elongation, Vacuum, Tensil Strength, Adhesive Strength, Tear Resistance, and Weatherability ( read more )..... 10/14/2008 Closed
08-2053 Analytical Chemistry Laboratory needed for testing Methyl methacrylate (MMA). The procedure consists of putting a flexible PVC sample into a small volume (100-200 ml, I suppose) of MMA (the MMA has a polymerization inhibitor added) at a temperature of 61 C for 10 hours. We are not capable of doing this here at Vinylex; we don't have an explosion proof hood. Would this be something you could do if we supply the MMA? ( read more )..... 10/06/2008 Closed
08-2046 Analytical Chemsitry Laboratory needed for determination of molecular mass of plastic resin(PP,Polypropylene)after special treatment. ( read more )..... 10/06/2008 Closed
08-2045 Manufacturers of safety rubber play tiles needs Asia materials laboratory for ASTM testing of scrap rubber granules to BS EN 1177 or ASTM F 1292 certificate to operate in Norway markets. ( read more )..... 10/06/2008 Closed
08-2015 India physical laboratory needed for testing Acrylic tranparency. ( read more )..... 10/03/2008 Closed
08-1929 Midwest USA materials laboratory needed for testing lead content in plastics and laminating films. ( read more )..... 09/20/2008 Closed
08-1853 Materials Laboratory needed for testing UN-Certification of our product 220ltr. L ring drums. ( read more )..... 09/12/2008 Closed
08-1851 Materials Laboratory needed for PCB material test, such as Peel strength, tensile strength ets. ( read more )..... 09/12/2008 Closed
08-1846 USA Analytical Chemistry Laboratory needed for Chemical composition and certification of a resin based adhesive.I t can be supplied in liquid or cured form. ( read more )..... 09/15/2008 Closed
08-1834 Canada materials laboratory needed for ASTM D6400 or D6868 biodegradability certification testing done on a biodegradable plastic. The testing should include Mineralization data, disintegration data, eco toxicity data, and heavy metal analysis. Thank You ( read more )..... 09/10/2008 Closed
08-1833 India analytical chemistry laboratory needed for testing Polymer - Polypropylene in powder form which has not been put to use for the past six months. The material is lying in an open area in jumbo bags and covered with UV stabilized talpatri. The material is now showing signs of degradation. If we send you the samples of the material can you advice the status of the material along with the quality report for the same and its end use application. Kindly advice us of what quantity of samp ( read more )..... 09/10/2008 Closed
08-1828 USA FDA Materials Laboratory needed for Extractable/leachable testing This test was already performed to hoses samples, but we need to sent more samples to be analyzed. ( read more )..... 09/10/2008 Closed
08-1762 India materials laboratory needed for plastics and polymer testing mainly used in automotives,irrigation projects" ( read more )..... 08/26/2008 Closed
08-1760 California materials laboratory needed for quality testing silicon ingots (5 tons) -Diameter: Mix of 100mm-300mm -semiconductor grade made from 11N polysilicon -P type -Resistivity: 1-3 ohm-cm ( read more )..... 08/26/2008 Closed
08-1738 India Analytical Chemistry Laboratory needed to identify the granules of polymers identify the granules ( read more )..... 08/21/2008 Closed
08-1727 USA Radiochemistry Laboratory needed for ASTM F640-79 "Standard Test Methods for Radiopacity of Plastics for Medical Use" - testing required to fulfill requirements for above standard ( read more )..... 08/20/2008 Closed
08-1702 Materials Analytical Chemistry Laboratory needed to evaluate new plasticizers to be used in our primary bags. We have narrowed the selection to DINCH (1,2-Cyclohexanedicarboxylic acid diisononyl ester) or TOTM (Tri Octyl Trimellitate). I would like to be contacted to talk about your abilities to test for these compounds in a 4% sodium citrate solution. ( read more )..... 08/18/2008 Closed
08-1664 Materials Laboratory needed for polymer testing of polymer compound. ( read more )..... 08/12/2008 Closed
08-1649 Pharmaceuticals materials Laboratory needed for USP 88 <661>Biocompatibility Testing of Plastics, Class VI Testing for Polyethylene terephthalate (PET) Plastics. ( read more )..... 08/12/2008 Closed
08-1646 USA A2LA, and ISO Laboratory needed for ASTM Testing, GPC to verify is Mw = 700,K Da-2.0 Million Da (what we are expecting and want to find out), and the PDI 1.Homopolymer PMMA (soluble in THF, ethyl acetate, DCM) 2.Copolymer PMMA+(FA) fluoro-acrylate (soluble in THF, ethyl acetate) 3.Homopolymer (FA) fluoro-acrylate (soluble in THF, ethyl acetate, HFE) ( read more )..... 08/11/2008 Closed
08-1638 USA Materials Laboratory needed for testing polynuclear aromatic hydrocarbons in rubber ( read more )..... 08/07/2008 Closed
08-1626 USA/Canada Materials Laboratory needed for Molecular weight and molecular weight distribution determination of polycarbonate ( read more )..... 08/05/2008 Closed
08-1580 USA Materials Laboratory needed for conducting two experimental setups: 1. Surface Measurements: Sample 1 - 1cm x 1cm steel plate - 1-3 SEM images of surface to determine contamination on surface (topography) - parallel EDX measurement to determine elemental distribution of contamination Sample 2 - 1cm x 1cm steel plate - 1-3 SEM images of surface to determine contamination on surface (topography), using same resolution as in Sample 1 (to be able to compare) - parallel EDX measurement ( read more )..... 07/31/2008 Closed
08-1579 ASTM Materials Laboratory needed for ISO, DIN Odor testing about plastic either human sensory or equipment. ( read more )..... 07/31/2008 Closed
08-1571 USA Analytical Chemistry Laboratory needed for Anionic Polymerization of a monomer using butyllithium in hexane system. Your lab is responsible for polymerizing the monomer provided by us and, determining the yield and characterization the product using GPC and NMR. ( read more )..... 07/29/2008 Closed
08-1560 USA Pharmaceuticals Analytical Chemistry Laboratory needed for GC/Mass spec testing of isoprene - Anionic Polymerization of isoprene ( read more )..... 07/28/2008 Closed
08-1511 USA FDA, GMP, ICH, GLP, GDP Pharmaceuticals Materials Laboratory needed for testing low density polyethylene to determine the melt flow index. We need fast turnaround times. ( read more )..... 07/15/2008 Closed
08-1509 Materials Laboratory needed for testing plastics with impregnated materials such as conducted basic burn tests etc. but have found determination will require testing outside their capabilities. ( read more )..... 07/15/2008 Closed
08-1506 Medical Devices Materials Laboratory needed for testing on HDPE and polypropylene for health certificate ( read more )..... 07/15/2008 Closed
08-1500 West Coast USA Physical Lab needed for CAN/ULC S102.2 flammability testing of PETG based product tested for the CAN/ULC S102.2 surface burning characteristics of building materials and assemblies for thermoplastic materials. Minimum would be 6mm thick, max is 25mm thick ( read more )..... 07/14/2008 Closed
08-1493 India materials laboratory needed for physical testing tear strength of polyester lamianted film and pouches. ( read more )..... 07/14/2008 Closed
08-1492 USA Materials Laboratory needed for ASTM Testing of plasticsheet to ASTM D6954-04 Tested methods : as described in ASTM Test sample 1 : plastic sheet, 2 mm thick. Test sample 2 : plastic film, 0.1 mm thick. ( read more )..... 07/14/2008 Closed
08-1473 Materials laboratory needed for testing Specific Melt Resistivity for Polyethylene terephthalate (PET) in units of Ohm.cm ( read more )..... 07/10/2008 Closed
08-1464 FDA GLP Microbiology Laboratory needed for fungicide efficacy testing, MIL-STD 810F Method 508.5 (fungus) thru the testing pieces of several kinds of plastic resin in which our fungicid is mixed with by different concentration for the check of our fungicide efficacy thru the MIL standard. ( read more )..... 07/09/2008 Closed
08-1451 USA FDA GMP Toxicology Laboratory needed for ASTM Cytotoxicity testing on Polyethylene film Standard cytotoxicity testing Agar etc. ( read more )..... 07/09/2008 Closed
08-1449 Eastern USA Materials laboratory needed for RoHS WEEE certificationtesting for polypropylene cd case ( read more )..... 07/08/2008 Closed
08-1427 USA West-Coast lab Analytical lab needed for XRF of some PVC Material for detection of phalates. ASTM and EN 71 Heavy Metals ( read more )..... 07/04/2008 Closed
08-1387 Materials laboratory needed for analysis: EN 12192-1 Products And Systems For The Protection And Repair Of Concrete Structures - Granulometry Analysis - Part 1: Test Method For Dry Components Of Premixed Mortar EN 1767 Products and systems for the protection and repair of concrete structures. Test methods. Infrared analysis EN 12190 Products And Systems For The Protection And Repair Of Concrete Structures - Test Methods - Determination Of Compressive Strength Of Repair Mortar EN 13294 Products A ( read more )..... 06/30/2008 Closed
08-1380 Analytical Chemistry laboratory needed for identification testing of a coating over a nylon substrate. ( read more )..... 06/26/2008 Closed
08-1364 USA Physical Laboratory needed for ASTM Testing, Brittleness Temperature (ASTM D1790) of Plastic Sheeting by Impact - Want to get independent lab results of PVC samples at 20 degrees F. Our in-house testing shows all failures and our plastic supplies testing shows passing. ( read more )..... 06/25/2008 Closed
08-1349 Analytical Chemistry Laboratory needed for Testing solid wax sample (Tm = 90-110 C) by using vacuum distillation ( read more )..... 06/24/2008 Closed
08-1348 West Coast USA Materials laboratory needed for Radiography examination of PLASTICS, eg CPVC; possibly live flouroscopy. Not sure if this technology exists. ( read more )..... 06/24/2008 Closed
08-1347 USA Materials laboratory needed for Closeup macroscopy, SEM examination of plastic fracture surfaces & interpretation of features. ( read more )..... 06/24/2008 Closed
08-1341 USA Food Analytical Chemistry Laboratory needed for overall migration testing from OML plastics sheet into food simulants, per EU Food Compliance requirements ( read more )..... 06/23/2008 Closed
08-1322 Materials Laboratory needed for Weatherability Testing: Gardner Impact Test. Also, I am looking for a Rain Erosion or Heat Resistance/Conductivity test for Acrylic and Polycarbonate materials. ( read more )..... 06/21/2008 Closed
08-1320 US Environmental Materials Laboratory needed for ASTM & ISO Biodegradability Testing (ASTM 6400-99 or ISO 14855) to verify supplier's claim of their products are biodegradable. Products are plastic components associated w/ ball point pens. ( read more )..... 06/21/2008 Closed
08-1309 India Automotive Matericals Lab needed for ASTM Testing: ASTM D746, Low temperature impact test for PVC ( read more )..... 06/21/2008 Closed
08-1303 Textiles Laboratory needed for AATCC testing of applied spin finish and water-proofing finish levels (weight %) using standard soxhlet extraction technique. ( read more )..... 06/18/2008 Closed
08-1284 Materials Laboratory needed for transmission haze testing ( read more )..... 06/12/2008 Closed
08-1250 India Materials Laboratory needed for Rheological analysis of water soluble polymers. Storage and loss modulus at different temperature. ( read more )..... 06/08/2008 Closed
08-1236 Europe Pharmaceutical, Packaging or Materials Laboratory needed for testing extractables/leachables in plastic primary packaging material for nasal product ( read more )..... 06/06/2008 Closed
08-1219 USA Electrical Product Safety Laboratory needed for testing plastic hard helmets,to submit samples for the class E 20,000 volt standards ( read more )..... 06/04/2008 Closed
08-1200 Israel, ISO 17025 Materials Lab needed for testing, polystyrene particles counting particles size distribution (Malvern) Z-potential measurement (Malvern) ( read more )..... 06/01/2008 Closed
08-1189 Toy Product Safety Laboratory needed to test toys using an XRF for lead and all metals and plastics. Will ship toys to lab, they will test and send report and ship back. ( read more )..... 06/02/2008 Closed
08-1156 Radiochemistry laboratory needed for testing three concentration of a polyolusing Promega SignaTECT PKC Assay kit. ( read more )..... 05/26/2008 Closed
08-1131 Eastern USA Materials Laboratory needed for rheology testing for viscosity as a function of shear rate, at temperatures of 40, 80 and 120 F, of about 10 resins used to make coatings, because I am trying to design a pump/piping system. ( read more )..... 05/22/2008 Closed
08-1121 India Analytical Chemistry Lab needed to determine the % wax content in a polyester sample using Gas chromotography/ polyester resin component identification ( read more )..... 05/21/2008 Closed
08-1120 Asia, Malaysia Physical Lab needed to test a cable harness made of plastic to determine the physical and thermal properties of the cable harness. ( read more )..... 05/21/2008 Closed
08-1105 USA Materials Lab needed for testing to ASTM 4895 ( read more )..... 05/19/2008 Closed
08-1102 USA Analytical Chemistry Lab needed for ICP-AES testing for ASH content of polymers and dilution with HCl ( read more )..... 05/19/2008 Closed
08-1027 USA FDA GMP Analytical Chemistry Laboratory needed for LC/MS testing to determine small quantities of MBTS (less than 1 pmm) in a rubber sample. ( read more )..... 05/07/2008 Closed
08-1006 Materials Laboratory needed to measure the optical transmission and absorption of clear polyurethane sheet ( read more )..... 05/05/2008 Closed
08-0976 USA Analytical Chemistry Laboratory needed for testing to determine Pressure-Volume-Temperature (PVT) data on polypropylene resins ( read more )..... 04/30/2008 Closed
08-0966 Analytical chemistry USA lab needed to test to EN 13432, ASTM D6400 & D6868 standards for Analytical Testing, Bioanalytical Testing, Toxicology Testing, environmental, biodegradable plastic resin ( read more )..... 04/30/2008 Closed
08-0925 ISO Analytical Chemistry Laboratory in US needed for testing for Crystallinity index of nylon filament ( read more )..... 04/24/2008 Closed
08-0920 UK Textiles Laboratory needed for DIN 53354 Tensile Testing and 53363 Tear testing on PVC coated polyester fabric to DIN standards. ( read more )..... 04/24/2008 Closed
08-0909 USA lab with D149 and D150 capabilities needed to test for: Dielectric constant Dielectric strength (two PVC samples. we will provide the plaques) ( read more )..... 04/23/2008 Closed
08-0901 USA analytical chemistry lab with open flash point capabilities needed to determine the flash point of a solvent mixture. The flash point will likely be below ambient temperature (~0C) ( read more )..... 04/22/2008 Closed
08-0885 USA materials lab needed for resistivity measurements of insulating and semiconducting polymer films through 4-point probe measurements or similiar techniques. ( read more )..... 04/21/2008 Closed
08-0875 ISO Materials Laboratory needed for ISO 14855 Biodegradation Testing of plastic ( read more )..... 04/18/2008 Closed
08-0863 GMP bioanalytical lab needed for testing of residual PEI (poly ethylene imine) ( read more )..... 04/17/2008 Closed
08-0851 Analytical Chemistry USA lab with GPC capabilities needed to find the average molecular weight of a polymer purchased from Aldrich (~150>Mw>240 g/mol). Must accept purchase orders (PO) ( read more )..... 04/16/2008 Closed
08-0849 USA environmental, materials lab needed for ASTM biodegradability testing of plastic materials under specific conditions to ASTM D5210, ASTM D5271, ASTM D5511, ASTM D5526-94 standards. ( read more )..... 04/15/2008 Closed
08-0837 USA lab needed to provide a shear rate vs shear viscosity chart on 100 MF polyprop resin at temperatures ranging from 450F to ~700F in 50 degree increments. ( read more )..... 04/15/2008 Closed
08-0816 USA Texas lab with analytical chemistry capabilities needed for kruss 12 cst test to determine cst on a bulk polymer ( read more )..... 04/11/2008 Closed
08-0797 Large Medical Device Mfg needs USA Plastics and Polymers, Radiochemistry Lab for ASTM Testing: ASTM F640-07 "Determining Radiopacity for Medical Use" on several polymer samples. ( read more )..... 04/09/2008 Closed
08-0795 ISO Materials Lab (ISO 1183-21 certification prefered) needed to test density of samples from Acrylic rods of 6, 9 and 12 inch dia. Results accurate to 2%. Please inform us of your lab's best accuracy ( read more )..... 04/09/2008 Closed
08-0754 USA lab needed to analyze water-based emulsion polymer for residual styrene to nearest 0.01% or better. ( read more )..... 04/04/2008 Closed
08-0735 Asia physical lab needed for testing of tin,melamine,LDPE,PP to XX-6649-US,TRGT-8001-US,TRGT-06013-US,XX-6548-US,TRGT-6609-US ( read more )..... 04/03/2008 Closed
08-0650 India Textiles Microbiology Lab needed for Antimicrobial testing of synthetic Fabrics of Polyester/Polyamide ( read more )..... 03/25/2008 Closed
08-0648 Recycled Plastics Manufacturer needs USA Materials Lab for ASTM product quality testing. Hot/cold water is used to wash the recycled PET bottles to make it as clear and colored PET Flakes, we would like to know our product's specifications. Due to we currently don't have the computer sorting machine,so we need to send our sample to do the lab test from time to time to check our product's quality. ( read more )..... 03/24/2008 Closed
08-0640 Analytical Chemistry Lab needed for Chemical Separations, Inorganic, Thermal, Molecular structures, Surface, Microscopy and X-Ray, Process Analytical, Plastics Characterization " ( read more )..... 03/24/2008 Closed
08-0627 Large Medical Devices Manufacturer needs Bay, Area, California Non-CGMP Materials Lab needed for electron spin resonance of plastic extrusions. Looking to characterize free radical concentration at different times post irradiation. ( read more )..... 03/22/2008 Closed
08-0567 Materials Lab needed for polycarbonate Compatiability Testing of a both side coated antistatic coatedlaminate film of semi metpet+pe ( read more )..... 03/13/2008 Closed
08-0537 FDA GMP/GLP Materials Laboratory needed for ISO long-term optical stability testing of a fluorescent plastic. Are fluorescence properties going to change over time, and if so, how much? So, at a minimum, I think I'm interested in discoloration, transmittance, optical, and stability testing. Would like to know more about these methods, and if others might be appropriate/more appropriate. ( read more )..... 03/10/2008 Closed
08-0475 Materials Laboratory needed for Photo-DSC Analysis ( read more )..... 03/03/2008 Closed
08-0455 Mechanical Lab needed for Dynamic mechanical analysis on polymer blends. I would like to understand modulus development as a function of temperature through a temperature sweep and isothermal experiment. This is primarily to characterize polyphenylene sulfide. ( read more )..... 02/28/2008 Closed
08-0454 ENvironmental analytical chemistry lab needed for EN 13432, ISO 18455 testing to show proof of compostability of plastic material by European and ISO standards ( read more )..... 02/28/2008 Closed
08-0384 Toy product safety lab needed for safety testing a toy for 6-11 year olds that will be molded from food safe plastic. Seeking third party safety testing and the product is safe for to put product in mouth. ( read more )..... 02/19/2008 Closed
08-0355 ISO Analytical Chemsitry Lab needed to find Avg.molecular weight of polyester solvent soluble. ( read more )..... 02/18/2008 Closed
08-0284 Materials Laboratory needed for determination of Rubidium ion concentration to ~0.1 ppm level in a non-aqeous resin system ( read more )..... 02/06/2008 Closed
08-0273 Medical Devices Manufacturer needs materials laboratory for MALDI analysis of synthetic polymer ( read more )..... 02/05/2008 Closed
08-0268 Apparel microbiology laboratory needed for ASTM testing samples that are plastic foam with dimensions 13x9x0.6 inch. They do not absorb moisture/water. ( read more )..... 02/04/2008 Closed
08-0264 Analytical Chemistry laboratory needed for mosquito repellency testing of treated knitted hoses of synthetic yarns like Polypropylene, Polyester and Polyamide ( read more )..... 02/04/2008 Closed
08-0257 Analytical Chemistry laboratory needed to test all types of plastic & general plastic ( read more )..... 02/01/2008 Closed
08-0253 Analytical Chemistry laboratory needed for rheology testing - Flow curve on polymer beads (20-100 micron size) ( read more )..... 01/31/2008 Closed
08-0252 Analytical Chemistry laboratory needed for a quantitative analysis of C2 content in polypropylene copolymer samples. Please quote price. ( read more )..... 01/31/2008 Closed
08-0232 Analytical Chemistry laboratory needed to determine biodegradation of plastic materials via methods of SEM and SEC. ( read more )..... 01/30/2008 Closed
08-0228 Microbiology laboratory needed for ASTM testing for Microbial activity and digestion of plastic materials. ( read more )..... 01/29/2008 Closed
08-0224 Materials Analytical Chemistry laboratory needed to do the xylene soluble content of PP. Please send me the quotation ( read more )..... 01/29/2008 Closed
08-0223 Materials laboratory needed for mechanical testing of 15 different conformal coating products (acrylic, urethane, and synthetic rubber) using DMA (ASTM-D5279) and TMA (ASTM-D6341) to obtain glass transition temperature, CTE, and elastic modulus (Young modulus) values for all samples. Please let me know if you can help with doing the analysis. Also let me know if we are eligible to receive any special discount due to high number of samples. ( read more )..... 01/29/2008 Closed
08-0160 Analytical Chemistry laboratory needed for synthesis on 100g scale of polymer derivatives using thermocontrolled reactors, tangential flow filtration and lyophylization ( read more )..... 01/22/2008 Closed
08-0159 Analytical Chemistry laboratory needed to determine xylene soluble content of polypropylene according to ASTM D5492 ( read more )..... 01/22/2008 Closed
08-0137 Materials laboratory needed for determining the Thermodynamic properties of polymer solutions 1. Obtain The polymer-solvent interaction from either vapor pressure lowering, freezing point depression, boiling point elevation, osmotic pressure, solution viscosity experiments, etc. 2. Obtain polymer-nonsolvent interaction parameters. ( read more )..... 01/18/2008 Closed
08-0118 Analytical Chemistry laboratory needed to do pressure impulse fatigue testing of tubes according to AIMS 03-15-001 / 000 and ISO 6772. The samples should be bent to 90°. ( read more )..... 01/17/2008 Closed
08-0079 Analytical Chemistry laboratory needed for ASTM D6954-04 Biodegradation Testing Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation ( read more )..... 01/11/2008 Closed
08-0076 Analytical Chemistry laboratory needed to test drum liner that will be used for food storage. I need a migration test to determine the Estimated Daily Intake. ( read more )..... 01/11/2008 Closed
07-2560 Analytical Chemisry laboratory needed to test various polymer sheets for WVTR - water vapor transmission rate ( read more )..... 12/26/2007 Closed
07-2559 Analytical Chemistry laboratory needed for quantitative and qualitative analysis for polymer solutions ( read more )..... 12/26/2007 Closed
07-2552 MATERIALS ANALYTICAL CHEMISTRY LABORATORY NEEDED TO TEST POLYISOCYANURATE AND POLY URETHANE BLOCK. TEST DESCRIPTION: MEASUREMENT OF DENSITY ,THERMAL CONDUCTIVITY,COMPRESSIVE STRENGTH AND WATER VAPOR TRANSMISSION ( read more )..... 12/21/2007 Closed
07-2537 FDA Analytical Chemistry laboratory needed for water extraction ( read more )..... 12/19/2007 Closed
07-2520 Analytical Chemistry laboratory needed for ASTM F2466-05 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications ( read more )..... 12/17/2007 Closed
07-2467 FDA GMP Analytical chemistry laboratory needed for ASTM Testing to determine % of reflectance of plastic materials. ( read more )..... 12/10/2007 Closed
07-2450 Analytical chemistry laboratory needed to undertake gel permeation chromatography measurements on polymer resins (typically Nylon 12 or Pebax pellets) to determine molecular weight and molecular weight distribution of the polymer. Thanks for your help. ( read more )..... 12/06/2007 Closed
07-2423 Physical laboratory needed to test our Polypropylene according to ASTM D-2565-99, ASTM D 573, ASTM D 3012-04. ( read more )..... 12/05/2007 Closed
07-2384 Analytical chemistry laboratory needed for light transmission of plastic bottle sample, approx 0.7mm thick. Light range 350nm to 800nm ( read more )..... 11/29/2007 Closed
07-2380 Analytical chemistry laboratory needed for QA/AC test on polymers - GPC, titration, NMR, ICP, ICP-MS, GC-MS, IC, HPLC, TGA, KF, total solids ( read more )..... 11/29/2007 Closed
07-2184 Microbiology laboratory needed for ASTM Testing: ASTM D5511-02, Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions? ( read more )..... 11/04/2007 Closed
07-2176 Materials laboratory needed for Radiopacity testing to ASTM F 640 of Plastic Medical components ( read more )..... 11/02/2007 Closed
07-2157 Analytical Chemistry laboratory needed to measure permeability or the transmission rate of hydrogen sulphide gas through 1.0mm thick film of polyethylene ( read more )..... 10/30/2007 Closed
07-2121 Analytical chemistry laboratory needed to test polyurethane foam samples for UL94 - HBF rating ( read more )..... 10/29/2007 Closed
07-2086 Analytical Chemistry Laboratory needed to test polypropylene flat sheet media for filter to verify it meets USP 88 Class 6 requirements. ( read more )..... 10/23/2007 Closed
07-2006 Analytical Chemistry Laboratory needed for ASTM Testing, Polymer Identification &quntification ,end group analysis through IFTR,Molecular WT, CHemical Structure Characterisation ( read more )..... 10/12/2007 Closed
07-2005 Physical laboratory needed for ASTM Testing (ASTM C177)for thermal conductivity of PET foam ( read more )..... 10/12/2007 Closed
07-2004 Materials laboratory needed for all polymer testing of thermoplastics & thermosets plastics. ( read more )..... 10/11/2007 Closed
07-1975 Medical Device Laboratory needed for gpc & capilliary rheometry testing on FEP ( read more )..... 10/09/2007 Closed
07-1966 Materials laboratory needed for EN 60335-1 flammability testing of foam material to ensure it meets ISO 9772 for materials classified HBF. ( read more )..... 10/08/2007 Closed
07-1927 Medical Devices Laboratory needed for FDA (1 CFR 1611) Flammability Testing of Plastic ( read more )..... 10/01/2007 Closed
07-1922 Materials Laboratory needed for Analysis of the following samples: 1) GAR FILM PTO55 - 2 LAYER 2) GAR FILM HS- SINGLE LAYER 3) GAR FILM PS - 2 LAYER SAMPLE 1):- is to be analysed for structure - No of layers (Photo graphs on electron microscope Thickness as individual layers (Photo graphs on electron microscope) SAMPLE 2): is to analysed for chemicals analysis of Film Samples :-3) No of layer Thickness individual layer Chemicals analysi ( read more )..... 10/01/2007 Closed
07-1915 Materials laboratory needed for testing samples (2" diameter buttons) of company-made elastomers to pressures up to 10 KSI in fluids (oil, salt water) at temps up to 180 C for 1 - 2 weeks. We want to evaluate the swelling rates of these elastomers at these conditions. Evaluation to include physical dimension measurements and submersion-type volume determination. ( read more )..... 09/29/2007 Closed
07-1905 Physical laboratory needed for ASTM testing of rubber tiles. Kindly provide an official quotation of testing charges to us. 1. Abrasion Testing ASTM F1292 2. Coefficient of Friction ASTM D 3389 3. Elongation At Break ASTM D412, DIE C 4. Tensile Strength ASTM D412, DIE C 5. Coefficient of Thermal Expansion 6. Flammability ASTM D2859 (Burning Pill Test) 7. Shore A Hardness ASTM D2240 8. Tear Strength ASTM D624, DIE C 9. Water Permeability 10. Weatherization Test ASTM C67&D573 11. C ( read more )..... 09/28/2007 Closed
07-1854 Physical Laboratory needed for ASTM tensile testing (ASTM D882, ASTM 638, ASTM D3826) on plastic polymer consisting of a mix of PE and EVA using ASTM standards. ( read more )..... 09/22/2007 Closed
07-1844 Analytical Chemistry Laboratory needed for ASTM testing on W.P.E.titration on epoxy resin ASTM Method D 1652-04 ( read more )..... 09/20/2007 Closed
07-1833 Analytical chemistry laboratory required to provide plastics and polymer testing of polyester film samples so as to identify them as separate from PET film class 1)PET-G film 2) PET+ A-PET coextruded film 3) Film having more than one GSM coating Kindly inform whether such analysis & confirmation is Possible /Quotation test- charges/ test time/ sample size & qty etc ( read more )..... 09/19/2007 Closed
07-1830 Analytical chemistry laboratory required to perform polyester film analysis, polymer chemical analysis/Electron microscope for layers of coextruded film. ( read more )..... 09/19/2007 Closed
07-1798 Materials laboratory needed for ASTM Biodegradability and compostability testing of new biodegradable polyurethane foam product to support our product claims. ( read more )..... 09/15/2007 Closed
07-1797 FDA cGMP MedicalDevice Laboratory needed for extractable/leechable testing of PTFE in an injectable product ( read more )..... 09/15/2007 Closed
07-1789 Mechanical laboratory needed for materials testing on a rubber bush: 1.- Statics spring constant test 2.- Adhesion Test 3.- Vibrational fatigue test 4.- Setting test ( read more )..... 09/13/2007 Closed
07-1771 Microbiology Laboratory needed for ASTM micobial testing (ASTM G 21)to evaluate growth of fungi on Wood Fibre / High Density Polyurethane Composites infused with antifungal additives. Sample size is approximates 1 inch x 2 inch x 3 mm. Sample weight is approximately 20-30 grams. The Fungi to be tested are: Aspergillus niger, Penicillium pinophilum and Gliocladium virens The antifungal additives will be: Fungitrol 11 Irgaguard F 3000 Bethoguard Borogard ( read more )..... 09/12/2007 Closed
07-1745 Materials laboratory needed for rheology testing "index of adhesion" or cohesion or stickiness of red mud (clay) as a function of polymer dosage, solid concentration and composition of red mud (chemical and physical). Material contains caustic solution. ( read more )..... 09/10/2007 Closed
07-1731 Physical Laboratory needed for ASTM Testing D3575 suffix BB and ASTM D1596 dynamic cushioning for polyolefin foam samples ( read more )..... 09/07/2007 Closed
07-1706 Materials Laboratory needed for ASTM Testing (ASTM 3418-03) PEEK plastic material To measure the degree of crystallinity using DSC analysis ( read more )..... 09/04/2007 Closed
07-1704 Microbiology Laboratory needed for Microbiological testing for solid surfaces, including polymers, plastics and textiles. Test types include Survival/ Kill Testing and protocols for Anti-Microbial Textile Testing. ( read more )..... 09/04/2007 Closed
07-1698 Analytical Chemistry Laboratory needed for transmission electron microscopy TEM analysis of polyethylene. A small piece of the polyethylene sample will be cut, placed in a small glass vial, covered with chlorsulfonic acid, and kept at 60oC for 6 hours. The sample is then washed in sulfuric acid and water and subsequently dried. The dry sample is embedded using a room temperature cure epoxy in a silicone mold and left overnight. This sample block is then trimmed with a razor blade to expose t ( read more )..... 09/04/2007 Closed
07-1694 ISO Analytical Chemistry Laboratory needed for ASTM Testing, SEM, EDX, XRF for deposit testing ; metallurgical failures testing ; FTIR for plastics ( read more )..... 09/04/2007 Closed
07-1651 FDA GMP Analytical Chemistry Laboratory needed for TOxicity Testing and ASTM Biodegradability Testing of compostable plastic in compliance ASTM D 6400-99. ( read more )..... 08/27/2007 Closed
07-1645 Materials laboratory needed for Far Infrared ray testing for ceramic impregnated fabric textiles made of 2 different fiber, Polyester and Polypropylene. The said emissivity tests are requested at the regular ordinary temperature within 4-20 micron of FIR, whose fabrics shall be sent to you, if the test can be done. Thanks. ( read more )..... 08/27/2007 Closed
07-1596 Analytical Chemistry Laboratory needed for gas testing in compact fluorescent lamps and incandescent lamps, as well as their approximate mass balance. Most likely we would test 2 - 3 popular models of both types of light bulbs. Additionally, the tests would need to be completed in the near future, preferably between 3 to 10 days. We ran across the following list of components, which may be helpful in your evaluation of this project: CFLs: glass steel silicon (in ICs, t ( read more )..... 08/21/2007 Closed
07-1579 Materials Laboratory needed for testing for Molecular weight and polydispersion value of P(VDF-TrFE) copolymer is to be measured from the raw material in pellet form. ( read more )..... 08/20/2007 Closed
07-1549 Materials laboratory needed for ASTM thermal conductivity testing to ASTM c177. ( read more )..... 08/15/2007 Closed
07-1544 Physical Laboratory needed for environmental stress crack resistance testing, via stack testing, for 1L PE bottles, approximate loadings 14-25Kg, 180 bottles (possibly 60 at a time), filling of bottles with stress crack solution and weigh, sealing caps onto bottles (caps not perfect fit, require gluing/melt seal) for gas tight seal, put on stack test rig at 40oC, Monitor twice daily to failure (likely 60 days- not certain) ( read more )..... 08/15/2007 Closed
07-1520 Analytical Chemistry needed for to reverse engineering of a polyol resin blend (formula) that is used as the resin side to a 2 component polyurethane low density rigid foam. When mixed with liquid polymeric MDI, it forms a rigid foam. I have a quart liquid sample of the resin blend.I need to know what resins, surfactants, and catalysts are in the blend, and approximate concentrations. ( read more )..... 08/10/2007 Closed
07-1512 Physical laboratory needed for ASTM testing tensile strength and stress relaxation properties of various nitrile butadiene rubber products. ( read more )..... 08/09/2007 Closed
07-1506 Physical laboratory needed for ISO/ASTM Microtomy of high density polyethylene samples (max 90mm x 50mm). Section thickness of 5 microns. ( read more )..... 08/09/2007 Closed
07-1489 GLP / A2LA analytical chemistry laboratory needed for testing to determine amount of bound and unbound maleic anhydride via saponification of maleated polyolefin material ( read more )..... 08/08/2007 Closed
07-1470 FDA GLP / GMP microbiology laboratory needed for testing and small batch manufacturing of an antimicrobial polymer in development. We have been requested to send a sample to our joint development partner for evaluation. They require that this sample be prepared in a facility certified in cGMP or cGLP. For now, only a single small batch (<500g) of material is needed, but it is needed immediately. The procedure can be accomplished from start to finish in one working day, using basic laborator ( read more )..... 08/05/2007 Closed
07-1458 Analytical chemistry laboratory required for testing of VCI foam (Expanded Polyetylene Foam) ( read more )..... 08/02/2007 Closed
07-1431 Materials laboratory needed for atomic absorption testing to analyze the percent barium in a total of 20 polymeric samples. Samples can be dissolved in toluene if needed. Expected percentage of barium is approximately 12%. ( read more )..... 07/30/2007 Closed
07-1406 Analytical chemistry laboratory needed for testing to determine PET's intrinsic viscosity (solvent: orthochlorophenol). Please include the following: 1. cost of analysis 2. turn-around rate of results 3. copy of test procedure conducted This is an urgent requirement so I would appreciate it if you could give me the feedback ASAP. ( read more )..... 07/25/2007 Closed
07-1391 Materials laboratory needed for strength analysis (tensile, compressive, flexural)and testing in BS 2782 standards Tensile strength with elongation at first break. flexural strength Compressive strength ( read more )..... 07/24/2007 Closed
07-1383 Analytical laboratory needed for biodegradability testing(up to 20 days)on 2 water soluble polymers. ( read more )..... 07/23/2007 Closed
07-1376 Toxicology Laboratory needed for performing ISO Toxicology Testing: ISO 10993-5 Tests for cytotoxicity-in vitro methods 10993-10 Tests for irritation and sensitization 10993-11 Tests for systemic Toxicity ( read more )..... 07/21/2007 Closed
07-1361 Mechanical laboratory needed to confirm that two resins are equivalent in Mechanical and Chemical Poperties. Information may be used for FDA submission. ( read more )..... 07/19/2007 Closed
07-1340 Materials laboratory needed for ASTM D1000 testing ( read more )..... 07/18/2007 Closed
07-1327 Microbiology laboratory needed for OECD Respirometry Testing and Biodegradabilty Testing of a new biopolymer ( read more )..... 07/16/2007 Closed
07-1297 Microbiology laboratory needed for ASTM or ISO testing for Anaerobic Biodegaradation of Plastics ( read more )..... 07/12/2007 Closed
07-1295 Materials laboratory needed for triplicates testing for the valuation of epoxy content in copolymer of ethylene and some acrylates, which contain glycidyl groups. ( read more )..... 07/12/2007 Closed
07-1291 Materials Laboratory needed for Polymer Identification Testing(polyurethane balloon) ( read more )..... 07/12/2007 Closed
07-1279 Materials laboratory needed for testing polymers ( read more )..... 07/11/2007 Closed
07-1271 Analytical Chemistry Laboratory needed for ATR and FTIR spectrum analysis testing for various types of plastics ( read more )..... 07/10/2007 Closed
07-1267 Analytical chemistry laboratory needed for epoxy content testing of polyolefin copolymer containing glycidyl acrylate groups. ( read more )..... 07/10/2007 Closed
07-1261 Analytical chemistry laboratory needed for chemical & mechanical testing on plastic injection moulding parts. ( read more )..... 07/09/2007 Closed
07-1213 Materials laboratory needed for Vicat Softening Temperature testing ( read more )..... 06/28/2007 Closed
07-1207 Materials laboratory neeed for reverse engineering testing of finished goods made of polypropylene co-polymer, need to reverse engineer the resin ( read more )..... 06/27/2007 Closed
07-1197 Materials Laboratory needed for testing UV-blocking characteristics of glass or acrylic sheet ( read more )..... 06/26/2007 Closed
07-1191 Materials laboratory needed for GPC (SEC) analysis testing of low molecular weight (organic-soluble; e.g. chloroform, THF) polymers including polydimethylsiloxanes and polyesters. ( read more )..... 06/26/2007 Closed
07-1150 Materials laboratory needed for swelling index testing and other related polymer tests ( read more )..... 06/21/2007 Closed
07-1149 Analytical Chemistry Laboratory needed for ASTM testing for Polymer charge density measurement ( read more )..... 06/21/2007 Closed
07-1119 Materials laboratory needed for Molecular weight testing for ultra high density polyethyline ( read more )..... 06/18/2007 Closed
07-1116 Materials Laboratory needed for ASTM Compression Force Deflection (CFD) Testing (ASTM 3574) for Viscoelastic Polyurethane foam at various temperatures and humidities. ( read more )..... 06/15/2007 Closed
07-1112 Analytical Chemistry laboratory needed for testing small samples of polymer composite materials in chlorine, iodine, ammonia and 70% hydrogen peroxide to determine if flexural strength is reduced by these chemicals. Cost for this work??? ( read more )..... 06/15/2007 Closed
07-1111 Physical laboratory needed liquid strike through testing by PE film perforated -plastics ( read more )..... 06/15/2007 Closed
07-1076 GLP Materials Characterization Testing of Polyester Polymer and it's additives. ( read more )..... 06/12/2007 Closed
07-1070 Automotive materials laboratoryneeded for testing of plastic parts (cockpit, door trim) for Automotive market. ( read more )..... 06/11/2007 Closed
07-1060 Materials Laboratory needed for steam permeability testing to DIN Standad 53122 of bag of plastic ammunition - Thickness Measure according to DIN 53370 - a measurement of nuance of color (green bronzes ral 6031 F9) Context: Quantity of sample:8 ( read more )..... 06/08/2007 Closed
07-1059 Materials laboratory needed for MTL testing of silicone baking molds ( read more )..... 06/07/2007 Closed
07-1052 Materials Laboratory needed for Dynamic Surface Tension Testing, Viscosity Testing and Densitometry Testing ( read more )..... 06/07/2007 Closed
07-1019 FDA GMP materials laboratory needed for GPC testing Medical Devices polymer MW weight ( read more )..... 06/04/2007 Closed
07-1003 Analytical Chemistry/Microbiology Laboratory needed for ASTM plastic biodegradation testing ASTM 5338-98 and ASTM 5210in selected samples. ( read more )..... 06/01/2007 Closed
07-1002 Analytical Chemistry laboratory needed for Quality Control testing on an ongoing basis to analyze plastic dinnerware and determine its approximate percent composition of (1) melamine-formaldehyde resin (2) urea-formaldehyde resin (3) alpha cellulose = wood pulp. accuracy only needed +/-3% of total sample, e.g. "melamine-formaldehyde resin 42% to 48% of total sample weight, urea-formaldehyde resin 21% to 27% of total sample weight, and alpha cellulose 28% to 34% of total sample weight". ( read more )..... 05/31/2007 Closed
07-0978 Analytical Chemistry Laboratory needed for molecular weight distribution, High temperature GPC (at 130oC) of polyamide using benzyl alcohol as solvent. ( read more )..... 05/29/2007 Closed
07-0977 Materials laboratory needed for ISO 527 stress testing for stress strain curves at conditions given below Stress strain curve with X-Y data in tabular format at different strain rates.. This test for stress strain curve has to be at room temperature at different pull speeds as mentioned below: 0.5mm/sec 50mm/sec 500mm/sec 5000mm/sec C] Stress strain curve with X-Y data in tabular format at different temperatures. This test for stress strain curve has to be at std pull spee ( read more )..... 05/29/2007 Closed
07-0973 Materials laboratory needed for testing the coefficient of thermal expansion of an epoxy material ( read more )..... 05/28/2007 Closed
07-0968 Materials Laboratory needed for UL94 flammability testing on plastics ( read more )..... 05/25/2007 Closed
07-0952 Materials laboratory needed for plastic material testing (.75 inch diameter rod), Testing according with Table I. ( read more )..... 05/23/2007 Closed
07-0946 Analytical Chemistry Laboratory needed for testing plastics in contact with cosmetic products for metals and anti oxidizing ( read more )..... 05/22/2007 Closed
07-0935 Toy laboratory needed for testing polymer for company that makes stamps for children. ( read more )..... 05/18/2007 Closed
07-0934 Materials laboratory needed for accelerated aging and/or degradation testing on Viton o-rings and gaskets in samples containing H2S and at a temperature of 135°F. ( read more )..... 05/18/2007 Closed
07-0923 Materials Lab needed for Durability Testing, Short test WSS-M2P188-A1 - Abrex Test ( read more )..... 05/17/2007 Closed
07-0919 Analytical Chemistry Laboratory needed for testing to identify a processing aid which is a blend of polymer matrix and active ingredients, may be amides, stearates, waxes, etc. Sample available. ( read more )..... 05/16/2007 Closed
07-0911 Analytical Chemistry laboratory needed for ClO2 Gas Generation Measurement: 1. Sodium Chlorite in a Plastic Film by Extraction (?) 2. Measure Chlorine Dioxide gas generation from film samples. ( read more )..... 05/15/2007 Closed
07-0900 Materials laboratory needed for ASTM Testing of thin file polymer samples according to ASTM D1003 Haze and Luminous Transmittance of Transparent Plastics ( read more )..... 05/15/2007 Closed
07-0896 Fiberglass manufacturing company needs physical laboratory for ASTM Testing flexural test as ASTM D 638, ( read more )..... 05/14/2007 Closed
07-0881 Materials Laboratory needed for GPC analysis of polymer ( read more )..... 05/11/2007 Closed
07-0879 Physical Laboratory needed for EN peel testing (EN 1372) of Adhesives for floor and wall coverings ( read more )..... 05/11/2007 Closed
07-0856 A2LA Analytical Chemistry Laboratory needed for biodegradation testing by FT-IR on various plastic types to show evidence of bio-degradation ( read more )..... 05/09/2007 Closed
07-0832 Environmental laboratory needed for biodegradibility testing of polymer samples. ( read more )..... 05/05/2007 Closed
07-0818 Physical laboratory needed for ASTM Testing of Polyester protective sleeve to ASTM 5927 LINE CALL OUT TPE 50211. In addition the other customer ask us following test on our aliminium+fiber glass tube. Thermal Conductivity Test according to ASTM C518,C177 and Thermal Sleeve Heat Insulation according to SAE J2302. ( read more )..... 05/02/2007 Closed
07-0780 US Analytical Chemistry Laboratory needed for Proton NMR testing of polyol alkyl ethers. The spectra will be messy because of potential side products. So, I just need to look at a particular area of the spectra to confirm my product. Thank you very much ( read more )..... 04/26/2007 Closed
07-0762 A2LA or ISO Analytical Chemistry Laboratory needed for Inherent and/or intrinsic Viscosity testing as well as High-Temp GPC for molecular weight distribution testing performed on regular polyethylene (PE) samples. ( read more )..... 04/24/2007 Closed
07-0727 Electrical Laboratory needed for ASTM Characterization Testing of Polymer Parts: Dielectric constant, dissipation factor, volume resistivity, surface resistivity and water absorption/adsorption ( read more )..... 04/19/2007 Closed
07-0718 Materials laboratory needed for identification testing of thermal plastic tubing ( read more )..... 04/18/2007 Closed
07-0661 FDA GMP and ISO Analytical Chemistry Laboratory needed for structural testing one polymer developed in in-house Laboratory, R & D. So, it is not commercially know polymer. Now, we want to confirm the structure of same using various analytical analysis like FT-IR, MS, NMR, XRD, etc. We are also able to provide probable structure, if you want. ( read more )..... 04/10/2007 Closed
07-0655 Non-GLP Microbiology Laboratory needed for testing plastic products against JIS Z 2801:2000 ( read more )..... 04/09/2007 Closed
07-0640 Manufacturer of marine care chemicals needs materials and toxicology laboratory for testing 7 seperate products for boat care and cleaning. Our question is can these products be tested to ensure they do not have adverse effect to marine life when washed into the water and, they are not damaging to the gelcoat, plastics, rubbers and all other areas on boats and yachts. We would like to request if these test can be carried out, the period of time required and an indication of costs. Thankyou in a ( read more )..... 04/05/2007 Closed
07-0622 Analytical laboratory needed for biodegradability testing of plastic bags to get a certificate. May also need testing to meet California standards. ( read more )..... 04/03/2007 Closed
07-0618 Analytical Chemistry Laboratory needed for volatile analysis released during curing of coatings. The test may require curing a resin in a convection oven, sample the exhaust air for analyzing volatiles. The study should also include the effects of air flow rate on volatile emission ( read more )..... 04/03/2007 Closed
07-0592 Sensory laboratory needed for testing recycled polystyrene pellets for odor type and strength ( read more )..... 03/31/2007 Closed
07-0590 Analytical Chemistry Laboratory needed to do TGA and GPC testing on three different classes of nominal "polystyrene" to discern what exactly are in them. ( read more )..... 03/30/2007 Closed
07-0568 Analytical chemistry laboratory needed for polymer identificaiton testing on hmhdpe film rolls that seem to be co extruded or laminated other polymers. So we want to know what othr polymers laminated on this film rolls. ( read more )..... 03/28/2007 Closed
07-0548 Environmental Materials laboratory needed for ASTM D6400 Biodegradation testing and compostability testing of starch derived plastic material/product ( read more )..... 03/23/2007 Closed
07-0544 Product Safety Laboratory needed for Polymer decomposition: 1) TGA 50-800 C on 2 samples 2) fumes at 500-800 by GC MS on one sample ( read more )..... 03/23/2007 Closed
07-0472 Electrical laboratory needed for solid bulk conductivity testing (resistivity) of a granulated organic polymer based powder coating -- average particle size 15-35 microns ( read more )..... 03/09/2007 Closed
07-0457 Analytical Chemistry Laboratory needed for Heat Capacity Testing for block polymer ( read more )..... 03/07/2007 Closed
07-0456 Product Safety Laboratory needed for testing hypoallergenic performance and sin sensitivity of a plastics compound to be used as a wraparound skin for cell phones. ( read more )..... 03/07/2007 Closed
07-0444 Microbiology laboratory needed for GMP and ASTM testing of rigid pvc panels for microbial growth [inhibition of growth]of a number of microorganisms ( read more )..... 03/06/2007 Closed
07-0388 Food packaging laboratory needed for ASTM Testing of bio-plastics to meet ASTM D6400-99 Certified testing of starch based plastic food serviceware for adherence to ASTM D6400-99 in preparation for submission to BPI. ( read more )..... 02/27/2007 Closed
07-0377 Environmental laboratory needed for biodegredation testing of plastics ( read more )..... 02/25/2007 Closed
07-0329 Materials laboratory needed for testing PE pipe to define types and amounts of materials used in as well as the different kinds of PE (HD or LD) and their percentages ( read more )..... 02/19/2007 Closed
07-0312 TOxicology laboratory needed for product safety testing on Rubber thread ( Natural latex product ) to meet international standards. We are looking for a party which can do INDEX OF PRIMARY CUTANEOUS IRRITATION IN THE RABBITS for our product.Kindly reply with amount of sample required and cost of sample. ( read more )..... 02/16/2007 Closed
07-0198 Analytical laboratory needed for ASTM testing (ASTM 1525 d ) 10N-50°C/hour ( read more )..... 02/01/2007 Closed
07-0196 Analytical Chemistry Laboratory needed for ASTM Testing of plastics to certify that they meet ASTM D6400 standards for biodegradability ( read more )..... 02/01/2007 Closed
07-0194 Physical laboratory needed for Adhesion testing for a polyurethane over galvanizing ( read more )..... 02/01/2007 Closed
07-0112 Analytical chemistry labroatory needed for testing plastic film with similar types of resin properties ( read more )..... 01/23/2007 Closed
07-0110 Physical laboratory needed for absorbtion and decomposition testing of the coating properties for a new product ( read more )..... 01/22/2007 Closed
07-0108 FDA GMP analytical laboratory needed for testing a cosmetics polymeric gel (aqueous) composition for percentage of solids and ash with a validated method. ( read more )..... 01/22/2007 Closed
07-0087 Analytical Chemistry laboratory needed for Raman spectroscopy testing of thin thermoplastic films to quantitatively detect additive concentrations. ( read more )..... 01/17/2007 Closed
07-0054 ISO Materials Laboratory needed for testing an edge-banding tape to cover rough edges on plastic masks used for radiation therapy. The tape is a laminate of two forms of vinyl with an acrylic adhesive. My regulatory consultant is recommending I have a series of test run to see if the plastics change at all due to the radiation they will see. (This isn't persistent radiation so the samples won't be hazardous in any way.) He has recommended a series of tests from ISO 10993-16. The premise is ( read more )..... 01/11/2007 Closed
07-0044 GLP Analytical Chemistry laboratory needed for testing trace metal analysis to ppb levels in organic polymer. Polymer is insoluble in organic solvents. Ash and digest method should be used ( read more )..... 01/10/2007 Closed
06-1924 ISO, Non-GLP Medical Devices Materials Laboratory needed for ASTM Testing of a Polymer: melt flow (melt index), Molecular Weight (GPC), Rheology (Stress strain) ( read more )..... 11/30/2006 Closed
06-1818 Materials laboratory needed for TEM or NEXAFS Microscopy of dried polymer films to determine polymer miscibility or immiscibility. I have some work using Transmission Electron Microscopy but further research says that NEXAFS might be better suited for this analysis. ( read more )..... 11/14/2006 Closed
06-1791 Materials laboratory needed for stress/strain testing on plastic "dogbones". Approximately 500 samples spread over a 100 day period. ( read more )..... 11/09/2006 Closed
06-1657 Analytical Chemistry Laboratory needed HPLC and FTIR testing of epoxy resins. ( read more )..... 10/23/2006 Closed
06-1645 PHYSICAL LABORATORY NEEDED FOR ASTM TESTING (ASTM C1371-97 AND ASTM E 84097A) PLASTICS (METALLIZED POLYESTER FILM) EMISSIVITY , Flame retardency ASTM E 84097A and Reflectivity ( read more )..... 10/20/2006 Closed
06-1634 Physical labroatory needed for ASTM tesing (ASTM D790 and D256)for flexural modulus and notched impact test I can provide 2 pounds of material that will need to be melted and re-moulded into standardized bars for these tests ( read more )..... 10/18/2006 Closed
06-1629 Microbiology laboratory needed for endotoxin and microbial testing ( read more )..... 10/18/2006 Closed