|
Incoming Optical Laboratory
Test Requests
|
|
|
No. |
Optical Testing or
Optical Research Description |
Approval Date |
status |
| 13-00580 |
Las Vegas Physical Laboratory needed for physical certification testing: drop ball testing for optical lenses 1.56 hard, AR coated lens (
read more )..... |
03/31/2013 |
Lab Needed |
| 13-00565 |
Certification Laboratory needed for ANSI certification compliance testing certify compliance with ANSI C12.18 American National Standard Protocol Specification for ANSI Type 2 Optical Port ANSI C12.19 SmartGrid/AEIC AMI Interoperability Standard Guidelinestogether with a smart meter. (
read more )..... |
03/27/2013 |
Lab Needed |
| 13-00341 |
USA optical laboratory needed for need to light testing the light power and frequency of light output from a small molded light pipe (
read more )..... |
02/19/2013 |
Lab Needed |
| 13-00304 |
Analytical chemistry laboratory needed for optical transmissivity testing to gnerate a chart of optical Transmissivity vs wavelength in the range of 0.5-1.8 micrometer for various liquids and plastic components. (
read more )..... |
02/15/2013 |
Lab Needed |
| 13-00255 |
India Optical Laboratory needed for testing of Optical radiation hazard with slit-lamp microscopes per iso 10939 section 4.4 and iso 15004-2) 1 sample (
read more )..... |
02/09/2013 |
Lab Needed |
| 13-00241 |
FDA GMP Physical laboratory needed for dimensional verification, force to fire testing, material hardness, etc.
The equipment required would be the likes of calipers, optical comparators, Instron/RAM/Zwick...
The product is a firing assembly for an auto injector.
I'd be happy to talk through what we are looking for, you can call me (215)-259-3592.
(
read more )..... |
02/06/2013 |
Lab Needed |
| 13-00214 |
Physical Laboratory needed for durability testing on optical mirrors and Lens to confirm that they meet mil spec Mil c 48497A
Mil c 48497A (
read more )..... |
02/05/2013 |
Lab Needed |
| 13-00075 |
USA analytical chemistry laboratory needed for GCMS testing of essential oils and physical testing (refractive index, specific gravity and optical rotation). What are your fees for these services? (
read more )..... |
01/11/2013 |
Lab Needed |
| 12-2369 |
Materials Laboratory needed for optical lens testing. We have 4 sample lenses to be tested. Desired tests are:
* Total percentage visible light transmission.
* UV and visible spectrum transmission by wavelength. 5nm increments preferred but 10nm increments would be acceptable.
* Standards reports for ANSI 80.3-2001, EN 1836:2005, AS/NZS 1067:2003 (
read more )..... |
12/26/2012 |
Closed |
| 12-2319 |
USA optical laboratory needed for Spectral Characterization testing. a quick and dirty spectral response as a function of angle test on a detector. Is this a service you provide, and if so how much would this test cost?
The wavelength range we're interested in is 400-700 or so, and resolution isn't too important- 5nm or even 10nm steps would be more than good enough. As far as angular response we're looking for 10 degree increments from normal to 110deg.
(
read more )..... |
12/14/2012 |
Lab Needed |
| 12-2290 |
New York or New Jersey Physical Laboratory needed for optical testing:Optical rotation ,refraction indice ,and percentage of sequiterpenes ,main components of amyris balsamifera from Haiti (
read more )..... |
12/11/2012 |
Lab Needed |
| 12-2207 |
FDA GMP Pennsylvania Physical Laboratory needed for FDA Testing: drop ball test for the optical lenses (
read more )..... |
11/26/2012 |
Lab Needed |
| 12-1953 |
UK physical laboratory needed for optical testing.. Compare light transmittance between two touch sensor variants.
Construction 1:
4mm plain glass
125µm PSA
PET hard coat film
AR film
Construction 2:
4mm AG glass
125µm PSA
PET hard coat film
(
read more )..... |
10/17/2012 |
Lab Needed |
| 12-1914 |
USA Optical Laboratory needed for mirror specular reflectance testing service.
1. Measure absolute specular reflectance at 45° AOI over the spectral range 430 - 1000nm for 5 locations on mirror
2. Part is a first surface mirror
a. Size: 35 x 26 x 1.25 inches
b. Weight approx. 30 lbs
c. Backing material has screw holes for handling and mounting
(
read more )..... |
10/10/2012 |
Lab Needed |
| 12-1825 |
Physical Laboratory needed for BS Safety hazard testing to BS EN 168:2002, Personal eye-protection. Non-optical test methods. Clause 16 and ISO 4855-1981(E), Clauses 3.1, 13, and 14 (
read more )..... |
09/21/2012 |
Lab Needed |
| 12-1029 |
FDA GMP Optical Laboratory needed for plastics testing to determine ABBE number on a sample, sample is a thin circular plastic material. (
read more )..... |
05/08/2012 |
Closed |
| 12-0969 |
Materials Laboratory needed for Optical Measurement Testing. Reflectivity value of plastic material solid surface, in visible spectrum (
read more )..... |
04/27/2012 |
Closed |
| 12-0955 |
Plastic curtains and screens manufacturer that needs Optical Laboratory for AWS testing to AWS standard F2.3 determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm. We need 2 to 5 samples tested." (
read more )..... |
04/25/2012 |
Lab Needed |
| 12-0867 |
India materials laboratory needed for option testing of Tempered Glass by optical and light (
read more )..... |
04/12/2012 |
Lab Needed |
| 12-0459 |
West Coast USA Mechanical Laboratory needed for Mechanical Strain Testing planar biaxial strain testing of thin film polymer specimens submerged in a saline solution. We are looking for the in-plane strain found through non-contact optical methods and the associated forces. There are about five different thin film membranes, each to be tested an appropriate sample-significant number of times. (
read more )..... |
02/22/2012 |
Lab Needed |
| 11-2800 |
Eastern USA physical laboratory needed for Thermal Shock testing and cycling testing -40C to +55C - optical beam stability (movement and placement), mechanical shock and vibration - 1064nm free space optical component (
read more )..... |
12/28/2011 |
Lab Needed |
| 11-2757 |
Midwest optics laboratory needed for ASTM Testing to ASTM C770-98, Stress Optical Coefficient (aka Brewster's Factor) of a glass composition. (
read more )..... |
12/21/2011 |
Lab Needed |
| 11-2674 |
India FDA GMP and ISO analytical chemistry laboratory needed for quality control testing in pharma raw material, inprocess material, finished product.
test names:1. hplc testing
2. g.c and optical rotation and moisturetesting,tlc testing
3.all types of tests of raw materialand in process material, finished product of drug material 4.physical chemical properties testing and limits testing 5. drug uniformity testing.
6.identification testing, chromato graphy testing, (
read more )..... |
12/09/2011 |
Closed |
| 11-2621 |
US Optical Laboratory needed for ASTM Optical Testing: (Transmission, Reflectance,Haze) 5 samples (
read more )..... |
12/05/2011 |
Lab Needed |
| 11-2619 |
Asia sunglass distributor needs optical materials certification laboratory to verify sunglass lens meet CE standard or ANSI standards (Z80.3.2010). Please include requirements and quotation
(
read more )..... |
12/05/2011 |
Lab Needed |
| 11-2593 |
India Metrology Laboratory needed for Non-destructive Calibration testing and on-going Calibration of optical micrometer by NIST certified lab (
read more )..... |
12/02/2011 |
Lab Needed |
| 11-02429 |
Solar Panel Company needs optical laboratory to measure total reflecting efficiency of the mirror. (
read more )..... |
11/14/2011 |
Lab Needed |
| 11-02155 |
India Pharmaceutical Laboratory needed for IP Testing: Specific Optical Rotation Testing of drug substance (1% solution of drug substance in water at 365 nm 25°C) (
read more )..... |
10/13/2011 |
Closed |
| 11-02007 |
Materials, Optical Laboratory needed to test Index of refraction of glass plates IR - 1.517. The plates are from glass BK7 and are in the dimension of 70x70x1.5 mm (they can be cut to smaller size if needed). 1. Accuracy of measurement < 5x10-5 (
read more )..... |
09/27/2011 |
Lab Needed |
| 11-02004 |
Contact Lens manufacturer needs basic benchtop toxicology testing, optical clarity testing, refractive index testing and oxygen permeability testing. (
read more )..... |
09/26/2011 |
Lab Needed |
| 11-01748 |
US Materials Laboratory needed for ANSI/ISO 5-3-1995 & ANSI/NAPM IT2.18-1995 (Photography -- Density Measurements --Part 3: Spectral Conditions)ANSI/ISO 5-4-1995 & ANSI/NAPM IT2.17-1995 (Photography --Density Measurements --Part 4; Geometric Conditions for Reflection Density) Determination of optical density (reflected) for base membranes (
read more )..... |
08/30/2011 |
Closed |
| 11-01386 |
ISO 17025 Laboratory needed for optical communication testing 1-SDH/SONET tests
1-1-bit eror rate
1-1-1-STM-1/OC-3
1-1-2-STM-4/OC-12
1-1-3-STM-16/OC-48
1-1-4-STM-64/OC-192
1-2-eye pattern analysis
1-2-1-eye crossing
1-2-2-eye amplitude
1-2-3-fall time
1-2-4-rise time
1-2-5-eye level
1-2-6-eye width
1-2-7-SNR
1-2-8-peak to peak jitter
1-2-9-eye opening
1-2-10-RMS jitter
1-2-11-optical modulation amplitude
1-2-12-eye height
2-enviromental tests
2-1-tempreture-humidity cyclic t (
read more )..... |
07/13/2011 |
Lab Needed |
| 11-01286 |
India Optical Physical Laboratory needed for testing 40 meters of optical cable (
read more )..... |
06/24/2011 |
Closed |
| 11-01253 |
USA Bioanalytical Laboratory needed for Optical filter spectrum profile inspection Scan optical filter between 400-800nm. Focus on blocking wavelength area, It is about OD4 to OD6. (
read more )..... |
06/20/2011 |
Closed |
| 11-01103 |
FDA GLP Analytical Chemistry Laboratory needed for Specific optical rotation testing (
read more )..... |
05/30/2011 |
Lab Needed |
| 11-01057 |
USA Analytical Chemistry Laboratory needed for USP analysis: Optical rotation of 2 water- soluble peptides (
read more )..... |
05/24/2011 |
Closed |
| 11-00873 |
Optical Laboratory needed to test the refractive index of a new glass at 1550nm. The material is available in form of lens and can be available in blank if necessary. (
read more )..... |
04/28/2011 |
Closed |
| 11-00789 |
Europe Analytical Chemistry Laboratory needed for AES testing for oils
· metals elements (ICP):
Fe, Cu, Cr, Pb, Ni, Al, Mo, Sn
· additives elements (ICP):
B, Mg, P, Zn, Ba, Ca, S
· contaminants elements (ICP):
K, Na, Si
PQ - Index
Viscosity in 40°C and 100°C
Viscosity Index
Oxidation
Colour Index - ASTM
Water Content
Optical Partical Analysis + Cleanlines acc ISO 4406
Water Content by Carl Fisher
Total Acid Number
We assume that we'll analysis 20 sample (
read more )..... |
04/19/2011 |
Closed |
| 11-00765 |
Optical Laboratory needed for performing glass haziness testing. (
read more )..... |
04/13/2011 |
Closed |
| 11-00287 |
FDA GMP Bioanalytical Pharmaceutical Laboratory needed for GMP peptide testing to determine temperature dependency on optical rotation at 20C and 25C (
read more )..... |
02/10/2011 |
Closed |
| 11-00269 |
Eastern USA Optical Laboratory needed for IES light reflectance measurement testing as per IES RAL-LR95-1. The instrument used would be an electric Reflectometer on three units of the sample in accordance with the ASTM Standard Test Method for Light Reflectance of Acoustical Materials. The specimen is a 1" thick Tectum Panel painted white. The panel is nominally 0.60m (23.75 in) wide by 0.60m (23.75 in.) long and 25mm (1 in.)thick. The average weight of the specimen as measured was 8.5 kg/m2 (1. (
read more )..... |
02/07/2011 |
Closed |
| 11-00159 |
ISO Optical Materials Laboratory needed for ISO transmittance testing and specifications of amber, green bottles (
read more )..... |
01/25/2011 |
Closed |
| 11-00018 |
Manufacturer of plastic curtains and screens that are used as safety welding screens in industrial environments needs Optical Laboratory to perform testing to determine how much light is passing through a welding curtain. The relevant standard is AWS standard F2.3. The test will require a spectrophotometer capable of reading transmittance from 200nm to 800nm.
We need 2 to 5 samples tested. (
read more )..... |
01/04/2011 |
Closed |
| 11-00006 |
China Optical Laboratory needed for Light Transmittance, Haze, Yellowness Index, and Ultra-Violet Light Absorption Testing on Greenhouse HDPE Tarps. (
read more )..... |
01/03/2011 |
Closed |
| 10-02922 |
Ophthalmic Lens Coating Company needs Midwest USA Optical Laboratory for measuring reflectance (%R), at 45 degree AOI of a thin film coating on a (flat) glass witness sample. Within some portion of spectrum between UV to Near IR. (
read more )..... |
12/01/2010 |
Lab Needed |
| 10-02909 |
Hillsboro, OR Optical Laboratory needed to test light transmittance or solar module glass (
read more )..... |
11/30/2010 |
Closed |
| 10-02881 |
United Kingdom EP Optical Laboratory needed for contact lens testing. (
read more )..... |
11/26/2010 |
Lab Needed |
| 10-02858 |
USA Optical Laboratory needed for testing a particular paint sample (to be provided) to determine spectral curve showing the reflectance of the sample at wavelengths between 400nm and 2500nm. Would also accept a curve limited to 400nm - 1000nm. (
read more )..... |
11/23/2010 |
Closed |
| 10-02846 |
Europe Consumer Products Safety Laboratory needed for testing Eco friendly detergents to ensure they don't contain hazardous chemical like phosphate, caustic, formaldehyde, enzyme, optical brightener ....It is biodegradable, natural, eco friendly ....friendly to the skin especially for baby and delicate skin..Laboratory should direct us for the most important test and claims. (
read more )..... |
11/22/2010 |
Closed |
| 10-02650 |
California Bay Area Optical Laboratory needed for testing reflectivity measurements on flat, solid samples using a spectrophotometer (such as Cary 5000 or Perkin-Elmer). This would be contract measurement and we'd like to know prices, too. (
read more )..... |
10/29/2010 |
Closed |
| 10-02584 |
Optical Laboratory needed for testing newly imported contact lenses from Korea for product safety. To include results of test into a certificate from the respective laboratories. (
read more )..... |
10/24/2010 |
Closed |
| 10-02382 |
West Coast USA Optical Laboratory needed to measure the total reflectance from a single sample. The sample is coated metal, approximately 1in. x 2.5in. x 0.03in. The coating to be measured is on the large surface (not the edge). I would like a measurement scan from 350nm to 1050nm. As the coating appears uniform, the measurement spot diameter can be up to the full width (1 inch) of the sample or as small at 0.1inch; what ever is easiest to measure (
read more )..... |
09/29/2010 |
Closed |
| 10-02261 |
Optical Laboratory needed for ASTM testing rolls of tape, adhesive to ASTM D 3359 ASTM D 3359 adhesive requirements of ASTM D 3359. (
read more )..... |
09/16/2010 |
Closed |
| 10-02248 |
USA Optical Laboratory needed for Fluorescent Imaging testing of thin coatings. Thickness measurements would be desired. (
read more )..... |
09/15/2010 |
Closed |
| 10-02157 |
Taiwan or China Optical Laboratory needed for LCD Testing, luminance measurements of LCD panels using a spectroradiometer (basic luminance meter is not good enough) (
read more )..... |
09/05/2010 |
Closed |
| 10-02147 |
Optical Laboratory needed for sub arc angle deviation testing - Mini Penta Prism 90º+/-3 arc sec. (
read more )..... |
09/03/2010 |
Closed |
| 10-02106 |
Preclinical Contract Research Organization needed for testing the effect of drugs in development for lowering IOP and protecting the optical nerve in rodent models for Glaucoma (
read more )..... |
08/31/2010 |
Closed |
|
(
read more )..... |
|
Lab Needed |
| 10-01468 |
Optical Laboratory needed for measurement the light transmission of four samples of PMMA acrylic panels in accordance to BS EN 2155-5. (
read more )..... |
06/19/2010 |
Closed |
| 10-01229 |
USA Optical Laboratory required to conduct contract testing of contact lenses. We have some sample soft disposable lenses which we need tested for sterility, stability, and quality (verification of power/dimensions, etc.). (
read more )..... |
05/19/2010 |
Closed |
| 10-01117 |
India Physical Laboratory needed for Glass Testing: Optical testing, Toughness testing, Transperecny testing, Magnification etc
(
read more )..... |
05/07/2010 |
Closed |
| 10-00881 |
Europe physical laboratory needed for EN 15152 Testing of Windscreen for HSR. All optical and physical tests required in EN 15152:2007. Except impact test. (
read more )..... |
04/07/2010 |
Closed |
| 10-00474 |
USA Materials needed for ASTM Testing, Extended (up to 2 weeks) testing to ASTM D3616-95 followed by optical dimensional measurement. (
read more )..... |
02/16/2010 |
Closed |
| 10-00418 |
Optical Laboratory needed for testing optical properties: 1.) Transmissitivity (Direct and Diffuse) of a Sample 2.) Absorptivity of a Sample 3.) Reflectivity of a Sample 4.) Transmissivity Spectrum (300nm -1100nm) of a sample. (
read more )..... |
02/10/2010 |
Lab Needed |
| 10-00365 |
Optical laboratory needed for optical testing aspherical optical lens with Taylor Hobson TalySurf equipment (
read more )..... |
02/04/2010 |
Lab Needed |
| 10-00360 |
Optical Laboratory needed for REALD testing of circular polarized lens Film to make 3D glasses. We are looking for a testing house to perform 3rd party tests on the material, so that it can pass REALD specifications before it arrives at our frame manufacturer. (
read more )..... |
02/04/2010 |
Lab Needed |
| 10-00172 |
Materials Laboratory needed for ASTM Testing, ASTM F 801 Optical Deviation testing of Transparent Parts (
read more )..... |
01/15/2010 |
Closed |
| 09-2530 |
USA Analytical Chemistry Laboratory needed for Inductively Coupled Plasma-Optical Emission Spectrometer (ICP-OES)Phosphorus % (
read more )..... |
12/28/2009 |
Closed |
| 09-2367 |
Israel physical weathering laboratory needed for optical testing of substrate that contains ~ 700 millimeter sized CPC optical elements. Whish to test actual performance under one sun conditions and compare to reverse ray analysis. (
read more )..... |
12/07/2009 |
Closed |
| 09-2326 |
ISO 17025 Materials Laboratory needed for Optical Distortion, Deviation, Luminous Transmittance, Haze and NVG weighted transmittance. SAmples will need high / low temp, and humidity conditioning. (
read more )..... |
12/02/2009 |
Closed |
| 09-2143 |
ASTM Environmental or Optical Laboratory required for ASTM C1549 - 04 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer (
read more )..... |
11/09/2009 |
Closed |
| 09-2028 |
Optical Laboratory required to test laser - need to measure and supply us a wavelength verification report. The device we are measuring is a 2790nm device. (
read more )..... |
10/27/2009 |
Closed |
| 09-1966 |
USA ISO 13468-Optical Laboratory needed for Optical transmittance of PMMA, 6 pcs., 35.00mm diameter x (
read more )..... |
10/19/2009 |
Closed |
| 09-1930 |
NIST Optical Laboratory needed for:
1) Measure spectral output of device (370-750nm)
2) Measure transmission of filter (370-750nm)
3) Optional, Measure power output of device (1-10,000uW/nm) (
read more )..... |
10/12/2009 |
Closed |
| 09-1854 |
Optical Laboratory needed for optical selectivity and transmission analysis performed on a variety of filters to conform to: MIL-DTL-13455E (
read more )..... |
10/01/2009 |
Closed |
| 09-1563 |
USA MIL-C-48497A Thermal Optical Laboratory required for optical transmission testing and environmental testing performed on ASE filters.
wavelengths from 350 to 1100 nm.
Filters have OD>5 for some wavelengths and transmission > 90% at other wavelengths.
Need Environmental tests performed per MIL-C-48497A (
read more )..... |
08/19/2009 |
Closed |
| 09-1332 |
USA Materials/Toxicology Laboratory needed for testing fiberglass duct liner material: Specific Optical Density ASTM E662; Flammability ASTM E-162; Fire Gas Toxicity Pittsburg Method; Water Repellency IST 80.6-92; Acute Inhalation Toxicity of Thermal Degradation-NYS Modified Pittsburg Protocol (
read more )..... |
07/22/2009 |
Closed |
| 09-1185 |
Food Packaging Laboratory needed for testing food packaging for MOISTURE, LEAD MIGRATION, CHARGED SUBSTANCES, SUBSTANCES INSOLUBLE IN WATER AND SOLVENT (NITROGEN COMPOUNDS)
WATER SOLUBLE SUBSTANCES
SUBSTANCES SOLUBLE IN ETHANOL-BENZENE MIXTURES
TOTAL STARCH
COLOPHONY AND TOTAL DERIVATES
TOTAL POLYCHLOROBIPHENYLS (PCB)
FIBROUS SUBSTANCES (CALC.)
SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT WATER AFTER 24 HOURS
SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIM (
read more )..... |
06/23/2009 |
Closed |
| 09-1153 |
Food packaging paper mfg needs EUROPE FOOD PACKAGING TESTING: MOISTURE, LEAD MIGRATION CHARGED SUBSTANCES SUBSTANCES INSOLUBLE IN WATER AND SOLVENT (NITROGEN COMPOUNDS) WATER SOLUBLE SUBSTANCES SUBSTANCES SOLUBLE IN ETHANOL-BENZENE MIXTURES TOTAL STARCH COLOPHONY AND TOTAL DERIVATES TOTAL POLYCHLOROBIPHENYLS (PCB) FIBROUS SUBSTANCES (CALC.) SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT WATER AFTER 24 HOURS SOLIDITY OF OPTICAL BLEACHING AGENT IN CONTACT WITH SIMULANT ACETIC ACID AF (
read more )..... |
06/18/2009 |
Closed |
| 09-0974 |
USA A2LA Materials Laboratory needed for ASTM Optical Testing for 9 armor glass windows 12 X 24 X 3 inches that need Optical Deviation (ASTM F 801-96 Referance I) Optical Distortion (ASTM F 2156-06 Referance m) and Haze Test (ASTM FD 1003 Referance K). (
read more )..... |
05/18/2009 |
Closed |
| 09-0755 |
Dubai or UAE Product Safety Laboratory needed for full RoHs Testing with flame retardent PBB & PBDE. I also need the testing of Phthales in Optical disc. (
read more )..... |
04/20/2009 |
Closed |
| 09-0155 |
ISO 11979-3 Optical Materials Laboratory needed for testing of intraocular lenses. (
read more )..... |
01/23/2009 |
Closed |
| 09-0081 |
ISO/IEC 17025 Optical Materials Laboratory required for laminated glass to be tested for optical deviation in accordance with ASTM F801-96. Can ship our product anywhere to be tested. (
read more )..... |
01/14/2009 |
Closed |
| 09-0042 |
USA Materials Laboratory required for Optical Testing. I work for a military communications equipment manufacturer and we are designing a new product that has a custom display window. We are concerned about the sunlight readability of said display through the window and are looking for someone to do some optical testing (reflection and transmission). We have very limited experience in this field so we are looking for someone with expertiese to assist in this process. (
read more )..... |
01/08/2009 |
Closed |
| 08-2634 |
India Electrical Laboratory needed for Electrical Testing of Optical Fiber Cables, Joint Enclosures and Splitters.
(
read more )..... |
12/28/2008 |
Closed |
| 08-2365 |
Eastcoast USA Metallurgical Laboratory needed to accurately tensile test fine diameter wire with an optical extensometry system. (
read more )..... |
11/18/2008 |
Closed |
| 08-1730 |
Optical Laboratory needed for ASTM Testing for Optical Deviation to ASTM F801-96, Optical Distortion to ASTM F2156 (
read more )..... |
08/21/2008 |
Closed |
| 08-1637 |
ISO Metallurgical Laboratory needed for Optical Emission Spectrograph Alloy analysis (
read more )..... |
08/07/2008 |
Closed |
| 08-1403 |
Optical Laboratory needed for UV-Vis Transmission testing of film samples between (240 - 700) nm (
read more )..... |
07/01/2008 |
Closed |
| 08-1006 |
Materials Laboratory needed to measure the optical transmission and absorption of clear polyurethane sheet (
read more )..... |
05/05/2008 |
Closed |
| 08-0537 |
FDA GMP/GLP Materials Laboratory needed for ISO long-term optical stability testing of a fluorescent plastic. Are fluorescence properties going to change over time, and if so, how much? So, at a minimum, I think I'm interested in discoloration, transmittance, optical, and stability testing. Would like to know more about these methods, and if others might be appropriate/more appropriate. (
read more )..... |
03/10/2008 |
Closed |
| 08-0526 |
Optical Lab needed to determine the UV transmission of various coatings applied to a glass substrate. (
read more )..... |
03/09/2008 |
Closed |
| 08-0521 |
CONTRACT LAB NEEDED FOR ISO 15004-2 OPTICAL POWER MEASUREMENT FROM 200NM TO 1400NM (
read more )..... |
03/09/2008 |
Closed |
| 08-0309 |
Bioanalytical laboratory neeeded for conducting Erythromycin Biological Potency Assay, Erythromycin A, B and C, Optical rotation, pH, Moisture, Ash, Sulfocyanate (
read more )..... |
02/09/2007 |
Closed |
| 08-0260 |
FDA GMP Analytical Chemistry laboratory needed for optical rotation in methanol testing (
read more )..... |
02/01/2008 |
Closed |
| 07-2375 |
ISO Physical Analytical chemistry laboratory in USA needed for ASTM optical quality testing of injection molded plastic lens - Luminous Transmittance Percentage, Haze Percentage, Flatness
(
read more )..... |
11/28/2007 |
Closed |
| 07-2052 |
Experienced Cosmetics laboratory needed for testing on hair fibers including mechanical properties, optical properties, color, weathering, and any other testing available. (
read more )..... |
10/18/2007 |
Closed |
| 07-1997 |
GMP Analytical Chemistry Laboratory needed for optical rotation, elemental analysis (C, H, O, N, S) (
read more )..... |
10/11/2007 |
Closed |
| 07-1963 |
Physical laboratory needed for ASTM Optical fiber testing in Temperature Humidity Cycling chamber in which tamperature varies from -10 to +85 degree celcius & Relative Humidity i.e. RH varies from 0% to 95% (
read more )..... |
10/05/2007 |
Closed |
| 07-1554 |
Laboratory needed for FCC Specific optical rotation determination testing. (
read more )..... |
08/15/2007 |
Closed |
| 07-1421 |
Optical laboratory needed for reflectivity measurement - spectrophotometer 350-1600nm
index of refraction, scratch dig, dimensions, angles, and p-v wavefront for a transmissive plano-optic (
read more )..... |
07/27/2007 |
Closed |
| 07-1316 |
we need to verify the specific rotation (observed angle of FDA cGMP, GLP analytical chemistry laboratory needed for testing optical rotation of plane polarized light of several API's in solution in order to verify enantiomeric excess and purity (
read more )..... |
07/15/2007 |
Closed |
| 07-0056 |
Materials laboratory needed for testing specific Optical Rotation for compound of Molecular wt 350
& sample availability of 3-4 mg (
read more )..... |
01/11/2007 |
Closed |
| 06-1826 |
Optical laboratory needed for testing % transmittance through clear and coated fused silica. Coated would be less
than 0.1% transmittance. (
read more )..... |
11/14/2006 |
Closed |
| 06-1626 |
FDA GMP analytical chemsitry laboratory needed testing Optical Rotation of Dextromethorphan HBr according to USP monograph ( I.D. "A" ) (
read more )..... |
10/18/2006 |
Closed |
| 06-1576 |
Physical optical laboratory needed for photometric testing (flux, intensity, colorimetry) of LEDs. (
read more )..... |
10/07/2006 |
Closed |
| 06-1429 |
Microscopy and Imaging Laboratory for petrography and optical determination of heavy mineral grains (
read more )..... |
09/18/2006 |
Closed |
| 06-0948 |
Physical and optical laboratory needed for testing for illumination and color of keypads when put into assemblies. (
read more )..... |
06/19/2006 |
Closed |
| 06-0922 |
FDA cGMP laboratory needed for ORD Optical Rotatory Dispersion of synthetic high purity peptide samples. Repeat analysis of cGMP material needed. (
read more )..... |
06/13/2006 |
Closed |
| 06-0843 |
Pharmaceuticals analytical chemistry and microbiology laboratory needed for European Pharmocopeia testing of granulated sugar Description, Identifacation, Appearance of Solution, Conductivity, Specific Optical Rotation, Color Value, Dextrines, Lead, Reducing Sugars, Loss on Drying, Sulphites, Bacterial Endotoxins and any other test required under sucrose in EP (
read more )..... |
05/29/2006 |
Closed |
| 06-0830 |
Physical laboratory needed for determination of light transmittance of an optical lens manufactured from crystal polystyrene. Must be able to meet a minimum specification of 90%. (
read more )..... |
05/26/2006 |
Closed |
| 06-0593 |
FDA GMP and ISO Analytical Chemistry laboratory needed for particle size testing using (Hiac royoco counter sizer, Malvern Master sizer, optical microscope, XRPD testing and thermal analysis(DSC,TGA, hot stage microscopy)... (
read more )..... |
04/18/2006 |
Closed |
| 06-0526 |
ISO physical laboratory needed for optical testing to measure spectral transmittance of camera lens. (
read more )..... |
04/05/2006 |
Closed |
| 06-0437 |
Large company looking for mechanical and analytical laboratory for sizeable account. Testing includes Atomic Force Microscopy (AFM), Auger Spectroscopy, Boroscopy, Capillary Electrophorses (CE), Chemical Imaging Microscope (Fluorescence), Composite Layup Sequencing, Contact Angle Goniometry, Dektak Profilometer, Dynamic Light Scattering, Dynamic Tear test, Energy Dispersive X ray Spectroscopy (EDS, Fiber Matrix Void Volume Fractions, Fractographic Examination (optical) and Scanning Electron Micr (
read more )..... |
03/22/2006 |
Closed |
| 06-0432 |
Optical rotation testing by automatic polarimetry in ethanol at 20 degrees C. (
read more )..... |
03/21/2006 |
Closed |
| 05-0377 |
Imaging of glass micro structures with dynamic range of 10 to 1000 microns. Tclear glass is 60 mm cube but having small defects then need to imaged and measured. typical defect size and spacing between defects from multiple views. I also need to obtain digital optical images (
read more )..... |
05/16/2005 |
Closed |
| 05-0006 |
HPLC-Grasses, extracts, isolates optical rotation of HPLC analyzed materials (
read more )..... |
01/06/2005 |
Closed |